IEC 60745-2-17:2010

IEC 60745-2-17 ®
Edition 3.0 2010-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Hand-held motor-operated electric tools – Safety –
Part 2-17: Particular requirements for routers and trimmers

Outils électroportatifs à moteur – Sécurité –
Partie 2-17: Règles particulières pour les défonceuses et les affleureuses

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60745-2-17 ®
Edition 3.0 2010-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Hand-held motor-operated electric tools – Safety –
Part 2-17: Particular requirements for routers and trimmers

Outils électroportatifs à moteur – Sécurité –
Partie 2-17: Règles particulières pour les défonceuses et les affleureuses

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 25.140.20 ISBN 978-2-88910-990-6
– 2 – 60745-2-17 © IEC:2010
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 General requirements .6
5 General conditions for the tests .6
6 Void.6
7 Classification.6
8 Marking and instructions.7
9 Protection against access to live parts.7
10 Starting .7
11 Input and current .7
12 Heating .7
13 Leakage current .7
14 Moisture resistance .8
15 Electric strength .8
16 Overload protection of transformers and associated circuits .8
17 Endurance.8
18 Abnormal operation .8
19 Mechanical hazards.8
20 Mechanical strength .9
21 Construction .9
22 Internal wiring.9
23 Components .9
24 Supply connection and external flexible cords .9
25 Terminals for external conductors.9
26 Provision for earthing .9
27 Screws and connections .10
28 Creepage distances, clearances and distances through insulation.10
29 Resistance to heat, fire and tracking.10
30 Resistance to rusting.10
31 Radiation, toxicity and similar hazards.10
Annexes .12
Annex K (normative) Battery tools and battery packs .12
Annex L (normative) Battery tools and battery packs provided with mains connection
or non-isolated sources.12
Annex M (normative) Safety of working stands for operation with hand-held motor-
operated electric tools .13
Bibliography.30

60745-2-17 © IEC:2010 – 3 –
Figure 101 – Measurement of distance between handle and cutter .11
Figure M.301 – Working stand with installed hand-held router.23
Figure M.302 – Dimensions of table.23
Figure M.303 – Dimension of table rings .24
Figure M.304 – Fence.24
Figure M.305 – Examples of guides suitable for curved work .25
Figure M.306 – Test probe.26
Figure M.307 – Definition of fence pressure device deflection measuring point and
directions of application of test forces .26
Figure M.308 – Definition of fence pressure device deflection measuring point and
directions of application of test forces (vertical view) .27
Figure M.309 – Definition of table pressure device deflection measuring point and
directions of application of test forces (horizontal view) .27
Figure M.310 – Definition of the adjustable guard deflection measuring points and
directions of application of test forces .28
Figure M.311 – Definition of guiding steady deflection measuring points and directions
of application of test forces .29
Figure M.312 – Definition of the adjustment of the fence plates in the direction
perpendicular to the plane of the fence .29

Table M.301 – Fences and table pressure device displacement .21
Table M.302 – Adjustable guard deflection .21
Table M.303 – Guiding steady deflection .22

– 4 – 60745-2-17 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS –
SAFETY –
Part 2-17: Particular requirements for routers and trimmers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in whic
...