IEC PAS 62323:2002

IEC/PAS 62323
Edition 1.0
2002-06
Dimensions of half pot cores
made of magnetic oxides
for inductive proximity switches

PUBLICLY AVAILABLE SPECIFICATION
INTERNATIONAL
Reference number
ELECTROTECHNICAL
IEC/PAS 62323
COMMISSION
IEC/PAS 62323
Edition 1.0
2002-06
Dimensions of half pot cores
made of magnetic oxides
for inductive proximity switches

PUBLICLY AVAILABLE SPECIFICATION
INTERNATIONAL
Reference number
ELECTROTECHNICAL
IEC/PAS 62323
COMMISSION
– 2 – Copyright © 2002, IEC
INTERNATIONAL ELECTROTECHNICAL COMMISSION

___________
DIMENSIONS OF HALF POT CORES MADE OF MAGNETIC OXIDES

FOR INDUCTIVE PROXIMITY SWITCHES

FOREWORD
A PAS is a technical specification not fulfilling the requirements for a standard, but made available to

the public.
IEC-PAS 62323 has been processed by IEC technical committee 51: Magnetic components and ferrite
materials.
The text of this PAS is based on the This PAS was approved for
following document: publication by the P-members of the
committee concerned as indicated in
the following document:
Draft PAS Report on voting
51/657/PAS 51/674/RVD
Following publication of this PAS, the technical committee or subcommittee concerned will investigate
the possibility of transforming the PAS into an International Standard.
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.

DIMENSIONS OF HALF POT CORES MADE OF MAGNETIC OXIDES

FOR INDUCTIVE PROXIMITY SWITCHES

1 Scope
This PAS lays down the important dimensions for the mechanical interchangeability of a

preferred half po
...