IEC 63327:2021
(Main)Automatic floor treatment machines for commercial use - Particular requirements
Automatic floor treatment machines for commercial use - Particular requirements
IEC 63327:2021 deals with the safety of powered automatic floor treatment machines intended for commercial use indoors for the following applications:
– sweeping,
– scrubbing,
– wet or dry pick-up,
– polishing,
– application of wax, sealing products and powder-based detergents,
– shampooing
of floors.
The requirements given by this standard are applied in addition to the requirements for commercial floor treatment machines in IEC 60335-2-72, as far as applicable.
For automatic floor treatment machines solely designed for wet or dry pick-up, additional or modified requirements of IEC 60335-2-69 where stated are applicable.
Machines covered by this standard can operate in automatic or manual mode.
Modified requirements are given in Annex FF of this standard for automatic floor treatment machines not equipped with a manual mode.
The automatic floor treatment machines covered by this standard are designed to avoid hazardous contact with persons in the environment applied. It is recognized that automatic floor treatment machines for commercial use might require operation within close proximity to large groups of people, such as in shopping malls and schools.
Throughout this standard, the term “machine” is used to refer to an automatic floor treatment machine.
The following power systems are covered:
– rechargeable batteries that are recharged by built-in battery chargers or off-board battery chargers which may be incorporated within the circuitry of the machine, or mounted on the machine and incorporated within the enclosure of the automatic floor treatment machine; or powered by batteries that need to be removed to be recharged with a charger that is external to the machine,
– Other systems are under consideration.
This standard does not apply to
– vacuum cleaners and water-suction cleaning appliances and automatic battery-operated cleaners for household use (IEC 60335-2-2);
– floor treatment machines and wet scrubbing machines for household use (IEC 60335‑2‑10);
– battery chargers (IEC 60335-2-29);
– floor treatment machines for commercial use (IEC 60335-2-67);
– spray extraction machines for commercial use (IEC 60335-2-68);
– road sweepers;
– machines designed for use on slopes with a gradient exceeding 20 %;
– machines equipped with a power take-off (PTO);
– machines designed for use in corrosive or explosive environments (dust, vapour or gas);
– machines designed for use in vehicles or on board of ships or aircraft.
– vacuum cleaners designed for pickup of combustible dust;
– appliances for medical purposes (IEC 60601-1);
– driverless industrial trucks and their systems (ISO 3691-4);
– robots and robotic devices: Safety requirements of personal care robots (ISO 13482)
– machines with parts that extend beyond the contact zone of the machine;
– machines designed for picking up liquids with a flash point below 55 °C.
Machines automatiques de traitement des sols à usage commercial - Exigences particulières
L'IEC 63327:2021 traite de la sécurité des machines automatiques de traitement des sols destinées à un usage commercial en intérieur pour les applications suivantes:
– le balayage,
– le brossage,
– le ramassage à sec ou en présence d'eau,
– le polissage,
– l'application de cire, de produits d'étanchéité et de détergents à base de poudre,
– le nettoyage par shampouineuse
des sols.
Les exigences données dans la présente norme s'appliquent en plus des exigences pour les machines de traitement des sols à usage commercial données dans l'IEC 60335-2-72, pour autant qu'elles soient applicables.
Pour les machines automatiques de traitement des sols conçues uniquement pour le ramassage à sec ou en présence d'eau, les exigences supplémentaires ou modifiées comme indiqué de l'IEC 60335-2-69 sont applicables.
Les machines couvertes par la présente norme peuvent fonctionner en mode automatique ou en mode manuel.
Les exigences modifiées sont indiquées à l'Annexe FF de la présente norme pour les machines automatiques de traitement des sols qui ne disposent pas d'un mode manuel.
Les machines automatiques de traitement des sols couvertes par la présente norme sont conçues de manière à éviter tout contact dangereux avec des personnes dans l'environnement d'application. Il est avéré que les machines automatiques de traitement des sols à usage commercial peuvent exiger un fonctionnement à proximité immédiate de grands groupes de personnes, notamment dans les centres commerciaux et les écoles.
Tout au long de la présente norme, le terme "machine" est utilisé pour désigner une machine automatique de traitement des sols.
Les systèmes d'alimentation suivants sont couverts:
– batteries rechargeables qui sont rechargées par des chargeurs de batterie intégrés ou des chargeurs de batterie externes qui peuvent être intégrés aux circuits de la machine, ou montés sur la machine et intégrés à l'enceinte de la machine automatique de traitement des sols; ou alimentation par batteries qu'il est nécessaire de retirer pour les recharger à l'aide d'un chargeur externe à la machine;
– d'autres systèmes sont à l'étude.
La présente norme ne s'applique pas
– aux aspirateurs et aux appareils de nettoyage à aspiration d'eau ainsi qu'aux aspirateurs automatiques alimentés par batteries à usage domestique (IEC 60335-2-2);
– aux machines de traitement des sols et aux machines à brosser les sols mouillés à usage domestique (IEC 60335‑2‑10);
– aux chargeurs de batterie (IEC 60335-2-29);
– aux machines de traitement des sols à usage commercial (IEC 60335-2-67);
– aux machines de nettoyage par pulvérisation et aspiration à usage commercial (IEC 60335-2-68);
– aux balayeuses de chaussée;
– aux machines conçues pour être utilisées sur des surfaces en pente dont l'inclinaison dépasse 20 %;
– aux machines équipées d'une prise de force;
– aux machines destinées à être utilisées dans des environnements corrosifs ou explosifs (poussière, vapeur ou gaz);
– aux machines destinées à être utilisées dans des véhicules ou à bord de navires ou d'avions;
– aux aspirateurs destinés à aspirer de la poussière combustible;
– aux appareils destinés à des usages médicaux (IEC 60601-1);
– aux chariots sans conducteur et leurs systèmes (ISO 3691-4);
– aux robots et composants robotiques: Exigences de sécurité pour les robots de soins personnels (ISO 13482);
– aux machines qui comportent des parties qui s'étendent au-delà de la zone de contact de la machine;
– aux machines destinées à aspirer des liquides dont le point d'éclair est inférieur à 55 °C.
General Information
Standards Content (Sample)
IEC 63327 ®
Edition 1.0 2021-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Automatic floor treatment machines for commercial use –
Particular requirements
Machines automatiques de traitement des sols à usage commercial –
Exigences particulières
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 63327 ®
Edition 1.0 2021-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Automatic floor treatment machines for commercial use –
Particular requirements
Machines automatiques de traitement des sols à usage commercial –
Exigences particulières
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.080 ISBN 978-2-8322-9763-6
– 2 – IEC 63327:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 11
5 General conditions for the tests . 11
6 Starting of motor operated appliances . 11
7 Stability and mechanical hazards . 12
8 Construction . 15
Annexes . 17
Annex FF (normative) Additional requirements for automatic floor treatment machines
not equipped with a manual mode . 18
Annex GG (normative) Requirements for docking stations for automatic floor treatment
machines for commercial use . 20
Annex HH (normative) Requirements to avoid backsiphonage at docking stations . 31
Annex II (informative) Emission of acoustical noise of docking stations . 32
Annex JJ (informative) Alternative route to fulfil safety critical functions . 34
Bibliography . 35
Figure 1 – Measurement of confined space speed . 16
Figure 2 – Confined space, stopping zone, and contact zone . 16
Figure 3 – Obstacle positioning during docking process . 16
Table 1 – Minimum required performance levels . 13
Table GG.1 – Degree of protection against harmful ingress of water . 21
Table JJ.1 – Safety functions . 34
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUTOMATIC FLOOR TREATMENT MACHINES FOR COMMERCIAL USE –
PARTICULAR REQUIREMENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63327 has been prepared by subcommittee 61J: Electrical motor-operated cleaning
appliances for commercial use, of IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
The text of this International Standard is based on the following documents:
CDV Report on voting
61J/734/CDV 61J/747A/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
– 4 – IEC 63327:2021 © IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at www.iec.ch/members_experts/refdocs. The main document types developed by
IEC are described in greater detail at www.iec.ch/standardsdev/publications.
The requirements for the construction and testing covered by this document are applied in
addition to the particular requirements for floor treatment machines with or without traction
drive, for commercial use given in IEC 60335-2-72:2021.
NOTE 1 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
NOTE 2 The 100 numbering is applied in certain clauses of this standard as these are additions to certain existing
clauses of IEC 60335-1, IEC 60335-2-69, and IEC 60335-2-72.
NOTE 3 The 200 numbering in certain clauses of this standard is applied to avoid overlap with the numbering of
the corresponding clauses of IEC 60335-1, IEC 60335-2-69, and IEC 60335-2-72.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.