eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Dix-huitième complément - Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité. Première partie: Culots de lampes

Subscribe to IEC 60061 Database to access the full and updated content of the series.

General Information

Status: Published
Publication Date: 30-Jun-1996

ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
: 29.140.10 - Lamp caps and holders

Technical Committee: SC 34B - Fit systems for light sources

Current Stage: PPUB - Publication issued
Start Date: 25-Jul-1996
Completion Date: 23-Jan-2000

Buy Documents

IEC 60061-1T:1996 - eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps - Page 1 preview

Standard

IEC 60061-1T:1996 - eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

English and French language (23 pages)

sale 15% off

Preview

sale 15% off

Preview

Get Certified

Connect with accredited certification bodies for this standard

Intertek Testing Services NA Inc.

Intertek certification services in North America.

ANAB United States Verified

Visit Website

UL Solutions

Global safety science company with testing, inspection and certification.

ANAB United States Verified

Visit Website

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Visit Website

Frequently Asked Questions

What is IEC 60061-1T:1996?

IEC 60061-1T:1996 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps". This standard covers: Subscribe to IEC 60061 Database to access the full and updated content of the series.

What is the scope of IEC 60061-1T:1996?

Subscribe to IEC 60061 Database to access the full and updated content of the series.

What ICS categories does IEC 60061-1T:1996 belong to?

IEC 60061-1T:1996 is classified under the following ICS (International Classification for Standards) categories: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION; 29.140.10 - Lamp caps and holders. The ICS classification helps identify the subject area and facilitates finding related standards.

How can I access IEC 60061-1T:1996?

IEC 60061-1T:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

IEC

IEC 60061-1:1969/AMD59:2019(Amendment)

Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

Standard
21 pages
English and French language
sale 15% off

07-Jul-2019
01
29.140.10
SC 34B

IEC

IEC 60838-2-2:2006+AMD1:2012 CSV(Main)

Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

IEC 60838-2-2:2006+A1:2012 applies to connectors for building-in (including those used for interconnection between LED modules) of miscellaneous types to be used with PCB-based LED modules. It bears the edition number 1.1. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the base publication has been modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. This consolidated version consists of the first edition (2006) and its amendment 1 (2012). Therefore, no need to order amendment in addition to this publication.
This publication is to be read in conjunction with IEC 60838-1:2011.

Standard
17 pages
English and French language
sale 15% off

IEC

IEC 60399:2004+AMD1:2008 CSV(Main)

Barrel thread for lampholders with shade holder ring

Gives limit dimensions of thread for metal or plastic and ceramic lampholders with shade holder rings made of metal or plastic. Dimensions for 'Go' and 'Not go' gauges for shade holder rings and for lampholders are also included. This consolidated version consists of the second edition (2004) and its amendment 1 (2008). Therefore, no need to order amendment in addition to this publication.

Standard
8 pages
English and French language
sale 15% off

20-Oct-2008
01
29.140.10
SC 34B

IEC

IEC 60061-3:1969/AMD22:1999(Amendment)

Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Standard
41 pages
English and French language
sale 15% off

28-Jul-1999
01
29.140.10
SC 34B

IEC

IEC TR 62351-12:2016(Main)

Power systems management and associated information exchange - Data and communications security - Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems

IEC TR 62351-12:2016(E) discusses cyber security recommendations and engineering/operational strategies for improving the resilience of power systems with interconnected Distributed Energy Resources (DER) systems. It covers the resilience requirements for the many different stakeholders of these dispersed cyber-physical generation and storage devices, with the goal of enhancing the safety, reliability, power quality, and other operational aspects of power systems, particularly those with high penetrations of DER systems. It addresses the resilience issues for cyber-physical DER systems interconnected with the power grid, building on the concepts and the hierarchical architecture described in the Smart Grid Interoperability Panel (SGIP) draft DRGS Subgroup B White Paper - Categorizing Use Cases in Hierarchical DER Systems.

Technical report
107 pages
English language
sale 15% off

06-Apr-2016
01
29.140.10
33.200
TC 57

IEC

IEC 61290-1-2:2026(Main)

Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method

IEC 61290-1-2:2026 applies to all commercially available optical amplifiers (OAs) and optically amplified sub-systems. It applies to OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOAs), and planar optical waveguides (POWAs). This document does not apply to polarization-maintaining optical amplifiers. This document defines uniform requirements for accurate and reliable measurements, by means of the electrical spectrum analyzer test method, of the following OA parameters, as defined in IEC 61291-1, Clause 3:
a) nominal output signal power;
b) gain;
c) reverse gain;
d) maximum gain;
e) polarization-dependent gain.
In addition, this test method provides a means for measuring the following parameters:
- maximum gain wavelength;
- gain wavelength band.
This document specifically covers single-channel amplifiers. For multichannel amplifiers, the IEC 61290-10 series applies.
NOTE 1 The applicability of the test methods described in this document to distributed Raman amplifiers is for further study.
NOTE 2 A test method for polarization-maintaining optical amplifiers is for further study.
This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of information on the applicability of this document to the scope;
b) harmonization of the scope with the IEC 61290-1 series;
c) addition of safety recommendations to Clause 4 and Clause 5;
d) correction of an error in Clause 7, item e);
e) replacement of the term "wavelength measurement accuracy" with "wavelength accuracy".

Standard
15 pages
English language
sale 15% off
Standard
47 pages
English language
sale 15% off
Standard
15 pages
French language
sale 15% off
Standard
30 pages
English and French language
sale 15% off

03-Feb-2026
33.180.30
SC 86C

IEC

IEC 63378-6:2026(Main)

Thermal standardization on semiconductor packages - Part 6: Thermal resistance and capacitance model for transient temperature prediction at junction and measurement points

IEC 63378-6:2026 specifies a thermal resistance and capacitance model for semiconductor packages. This model is named the digital transformation using thermal resistance and capacitance (DXRC) model. It predicts transient temperature at junction and measurement points.
This document applies to semiconductor packages such as TO-252, TO-263, and HSOP. It supports single chip packages dissipated heat from single package surface.

Standard
28 pages
English language
sale 15% off
Standard
29 pages
French language
sale 15% off
Standard
57 pages
English and French language
sale 15% off

03-Feb-2026
31.080.01
SC 47D

IEC

IEC TS 61851-26:2026(Main)

Electric vehicle conductive charging system - Part 26: EV supply equipment with automatic docking of a vehicle coupler located at the underbody of an electric vehicle

IEC TS 61851-26:2026, in combination with IEC 61851-1 or IEC 61851-23, gives the requirements for EV supply equipment with automatic docking and undocking functions (aEVSE) at the underbody of electrically propelled road vehicles according to ISO TS 5474-5.
Use of aEVSE with the megawatt charging system is under consideration.
This document provides requirements for aEVSE with a single vehicle connector or a single socket-outlet.
Requirements for aEVSE with more than one vehicle connector or more than one socket-outlet are under consideration.
This document only applies to automatic couplers of category 3, located at the underbody of an electric vehicle.
This document does not apply to automatic coupler of category 1: using a vehicle coupler defined by IEC 62196-2, IEC 62196-3 or IEC TS 62196-3-1.
This document does not apply to automatic couplers of category 2: using an electro-mechanical interface defined by EN 50696. EN 50696 also specifies automatic couplers located at the underbody of an electric vehicle. However, these couplers only provide DC power transfer.
Interoperable communication for docking and undocking between an aEVSE and an EV, extending the communication between an EV supply equipment and an EV as specified in IEC 61851-1, IEC 61851-23, IEC 61851-24 and the ISO 15118 series, is under consideration.
This document does not cover all safety aspects related to maintenance.

Technical specification
42 pages
English language
sale 15% off

03-Feb-2026
43.120
TC 69

IEC

IEC TS 61851-27:2026(Main)

Electric vehicle conductive charging system - Part 27: EV supply equipment with automatic docking of a vehicle coupler according to IEC 62196-2, IEC 62196-3 or IEC TS 62196-3-1

IEC TS 61851-27:2026, in combination with IEC 61851-1 or IEC 61851-23, gives the requirements for EV supply equipment with automatic docking and undocking functions (aEVSE) of a vehicle coupler according to IEC 62196-2, IEC 62196-3 or IEC TS 62196-3-1 for power transfer with electrically propelled road vehicles according to ISO TS 5474-5.
Use of aEVSE with the megawatt charging system is under consideration.
This document provides requirements for aEVSE with a single vehicle connector.
Requirements for aEVSE with more than one vehicle connector are under consideration.
This document only applies to aEVSE with automatic couplers of category 1: using vehicle couplers defined by IEC 62196-2, IEC 62196-3 or IEC TS 62196-3-1.
This document only specifies automatic conductive energy transfer using a vehicle connector and a vehicle inlet; it does not specify automatic conductive power transfer using a plug and a socket-outlet.
This document does not apply to aEVSE with automatic couplers of category 2: using an electro-mechanical interface defined by EN 50696.
This document does not apply to aEVSE with automatic coupler of category 3 (see IEC TS 61851-26).
EMC requirements for EV supply equipment are defined in IEC 61851-21-2.
Interoperable communication for docking and undocking between an aEVSE and an EV, extending the communication between an EV supply equipment and an EV as specified in IEC 61851-1, IEC 61851-23, IEC 61851-24 and the ISO 15118 series, is under consideration.
This document does not cover all safety aspects related to maintenance

Technical specification
47 pages
English language
sale 15% off

03-Feb-2026
43.120
TC 69

IEC

IEC 60743:2013/AMD1:2026(Amendment)

Amendment 1 - Live working - Terminology for tools, devices and equipment

Standard
3 pages
English language
sale 15% off
Standard
3 pages
French language
sale 15% off
Standard
6 pages
English and French language
sale 15% off

eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

Dix-huitième complément - Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité. Première partie: Culots de lampes

General Information

Buy Documents

IEC 60061-1T:1996 - eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

Get Certified

Intertek Testing Services NA Inc.

UL Solutions

ANCE

Frequently Asked Questions

Questions, Comments and Discussion

This May Also Interest You