Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay

Corrigendum 1 - Fibres optiques - Partie 1-49: Méthodes de mesure et procédures d'essai - Retard différentiel de mode

General Information

Status: Published
Publication Date: 21-Mar-2005

ICS: 33.180.10 - Fibres and cables

Technical Committee: SC 86A - Fibres and cables

Current Stage: DELPUB - Deleted Publication
Start Date: 26-Jun-2006
Completion Date: 13-Feb-2026

Relations

Corrects: IEC 60793-1-49:2003 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
Effective Date: 05-Sep-2023

Corrects: IEC PAS 60793-1-49:2002 - Optical fibres - Part 1-49 : Measurement methods and test procedures - Differential mode delay
Effective Date: 05-Sep-2023

Revised: IEC 60793-1-49:2006 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
Effective Date: 05-Sep-2023

IEC 60793-1-49:2003/COR1:2005 - Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
Released:3/22/2005 - Page 1 preview

Standard

IEC 60793-1-49:2003/COR1:2005 - Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay Released:3/22/2005

English and French language

10 pages

sale 15% off

Preview

sale 15% off

Preview

Get Certified

Connect with accredited certification bodies for this standard

TL 9000 QuEST Forum

Telecommunications quality management system.

ANAB United States Verified

Visit Website

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Visit Website

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

Visit Website

Frequently Asked Questions

What is IEC 60793-1-49:2003/COR1:2005?

IEC 60793-1-49:2003/COR1:2005 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay". This standard covers: Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay

What is the scope of IEC 60793-1-49:2003/COR1:2005?

Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay

What ICS categories does IEC 60793-1-49:2003/COR1:2005 belong to?

IEC 60793-1-49:2003/COR1:2005 is classified under the following ICS (International Classification for Standards) categories: 33.180.10 - Fibres and cables. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to IEC 60793-1-49:2003/COR1:2005?

IEC 60793-1-49:2003/COR1:2005 has the following relationships with other standards: It is inter standard links to IEC 60793-1-49:2003, IEC PAS 60793-1-49:2002, IEC 60793-1-49:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access IEC 60793-1-49:2003/COR1:2005?

IEC 60793-1-49:2003/COR1:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

IEC 60793-1-49:2003/COR1:2005 ...

CEI 60793-1-49 IEC 60793-1-49
(Première édition – 2003-03) (First edition – 2003-03)

Fibres optiques – Optical fibres –

Partie 1-49: Méthodes de mesure et procédures Part 1-49: Measurement methods and test

d'essai – Retard différentiel de mode procedures – Differential mode delay

CORRIGENDUM 1
Page 6 Page 7
AVANT-PROPOS FOREWORD
Dans le paragraphe concernant le cycle de In the paragraph concerning the mainte
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

IEC

IEC TR 62316:2026(Main)

Guidance for the interpretation of OTDR backscattering traces for single-mode fibres

IEC TR 62316:2026 which is a Technical report, provides guidance on the interpretation of backscattering traces, as obtained by traditional optical time domain reflectometers (OTDRs) for single-mode fibres. This document does not cover Polarization OTDRs. Also, backscattered power effects are discussed in case of unidirectional trace. Full description of the test measurement procedure can be found in Annex C of IEC 60793‑1‑40:2024. This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of the fibre types;
b) addition of information as regards attenuation uniformity.

Technical report
26 pages
English language
sale 15% off

07-Jan-2026
33.180.10
SC 86A

IEC

IEC 60794-1-131:2026(Main)

Optical fibre cables - Part 1-131: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Microduct inner clearance test, Method E31

IEC 60794-1-131:2026 describes the test procedures used to establish uniform requirements for microduct used to install optical fibre cables by blowing technique for the mechanical property - microduct inner clearance test. This document applies to microduct for use in optical fibre cable installation by blowing.
NOTE Throughout the document, the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.
This first edition cancels and replaces Method E31 of the first edition of IEC 60794-1-21 published in 2015, Amendment 1:2020. This edition constitutes a technical revision. edition includes the significant technical changes with respect to IEC 60794‑1‑21:2015/AMD1:2020:
a) Specification of Method E31.

Standard
6 pages
English language
sale 15% off
Standard
6 pages
French language
sale 15% off
Standard
12 pages
English and French language
sale 15% off

06-Jan-2026
33.180.10
SC 86A

IEC

IEC 60794-1-208:2025/COR1:2025(Corrigendum)

Corrigendum 1 - Optical fibre cables - Part 1-208: Generic specification - Basic optical cable test procedures - Environmental test methods - Pneumatic resistance, Method F8

Standard
1 page
English and French language
sale 15% off

02-Dec-2025
33.180.10
SC 86A

IEC

IEC TR 62284:2025(Main)

Effective area measurements of single-mode optical fibres - Guidance

IEC TR 62284:2025 which is a Technical Report, applies to single-mode optical fibres. Its object is to document the methods for measuring the effective area (Aeff) of these fibres. It defines three methods of measuring Aeff. Information common to all the methods is found in the body of this document. Information specific to each method is found in the annexes. The three methods are:
a) direct far-field (DFF);
b) variable aperture in the far-field (VAMFF);
c) near-field (NF).
The reference method, used to resolve disputes, is method A, direct far-field.
Effective area is an optical attribute that is specified for single-mode fibres and used in system designs probably affected by the non-linear refractive index coefficient, n2. There is agreement in both national and international standards bodies concerning the definition used in this document. Methods A, B, and C have been recognised as providing equivalent results, provided that good engineering is used in implementation.
The direct far-field is the reference method because it is the most direct method and is named as the reference method for mode field diameter in IEC 60793-1-45 and ITU-T Recommendation G.650.1.
A mapping function is a formula by which the measured results of one attribute are used to predict the value of another attribute on a given fibre. For a given fibre type and design, the mode field diameter (MFD) (IEC 60793-1-45) can be used to predict the effective area with a mapping function. A mapping function is specific to a particular fibre type and design. Mapping functions are generated by doing an experiment in which a sample of fibre is chosen to represent the spectrum of values of MFD and in which the fibres in the sample are measured for both MFD and Aeff. Linear regression can be used to determine the fitting coefficient, k, as defined by the following:
NOTE 1 Other mathematical models can be used if they are generally more accurate.
NOTE 2 See Annex E for more information.
This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) improvement of the description of measurement details for B-657 fibre;
b) modification of the minimum distance between the fibre end and the detector for the direct far field scan (Annex A);
c) deletion of Annex H.

Technical report
39 pages
English language
sale 15% off

01-Dec-2025
33.180.10
SC 86A

IEC

IEC 60794-1-129:2025(Main)

Optical fibre cables - Part 1-129: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Straight midspan access to optical elements, Method E29

IEC 60794-1-129:2025 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. The document defines test procedures used in establishing uniform requirements for mechanical performance-straight midspan access to optical elements. Throughout this document, the wording "optical cable" also includes optical fibre units, microduct fibre units, etc.
NOTE See IEC 60794‑1‑2 for a reference guide to test methods of all types and for general requirements and definitions.
This edition includes the following significant technical changes with respect to IEC 60794‑1‑21:2015 and IEC 60794-1-21:2015/AMD 1:2020:
a) this document cancels and replaces method E29 of IEC 60794-1-21:2015 and IEC 60794‑1‑21:2015/AMD 1:2020;
b) addition of the description for applicable cable types;
c) update of Figure 2a), Figure 2b) and Figure 3;
d) addition of the displacement measure description;
e) addition of the details to be reported.

Standard
9 pages
English language
sale 15% off
Standard
9 pages
French language
sale 15% off
Standard
18 pages
English and French language
sale 15% off

30-Oct-2025
33.180.10
SC 86A

IEC

IEC 60794-1-207:2025(Main)

Optical fibre cables - Part 1-207: Generic specification - Basic optical cable test procedures - Environmental test methods - Nuclear radiation, Method F7

IEC 60794-1-207:2025 describes test procedures to be used in establishing uniform requirements for optical fibre cables for the environmental property: performance degradation when exposed to nuclear radiation. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Method F7A evaluates performance degradation of optical fibre cable in environmental background radiation; Method F7B evaluates performance degradation of optical fibre cable in adverse nuclear environments.
NOTE Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.
This first edition cancels and replaces the method F7 of the second edition of IEC 60794-1-22 published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) detailed content of sample, apparatus, procedure, requirements and details of the method to be specified and reported are added.

Standard
9 pages
English language
sale 15% off
Standard
10 pages
French language
sale 15% off
Standard
19 pages
English and French language
sale 15% off

29-Oct-2025
33.180.10
SC 86A

IEC

IEC 60794-1-107:2025(Main)

Optical fibre cables - Part 1-107: Generic specification - Basic optical cable test procedures - Mechanical test methods - Torsion, method E7

IEC 60794-1-107:2025 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. This document defines test procedures used in establishing uniform requirements for torsion performance. Refer to IEC 60794-1-2 for a reference guide to test methods and for general requirements and definitions.
NOTE Throughout this document, the wording "optical cable" also includes optical fibre units, microduct fibre units, etc.
This first edition partially cancels and replaces IEC 60794-1-21:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60794-1-21:2015:
a) Update of the typical test length according to the different types of cables;
b) Update of Figure 2 by loading weights to cable gripping fixture.

Standard
10 pages
English language
sale 15% off
Standard
10 pages
French language
sale 15% off
Standard
20 pages
English and French language
sale 15% off

16-Oct-2025
33.180.10
SC 86A

IEC

IEC 60794-1-130:2025(Main)

Optical fibre cables - Part 1-130: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Coefficient of friction between cables, Methods E30

IEC 60794-1-130:2025 describes test procedures to evaluate the coefficient of dynamic friction of the sheathing material of a cable when pulled over or between other cables. Methods E30A and E30B evaluate the coefficient of friction between cables for when either a cable is pulled over the top of other cables (drum test) or when pulling a cable between other cables of the same shape (flat plate test). This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, wording "optical cable" can also include optical fibre units and microduct fibre units.
This first edition cancels and replaces Method E24 of the first edition of IEC 60794‑1‑21 published in 2015, Amendment 1:2020. This edition constitutes a technical revision.

Standard
10 pages
English language
sale 15% off
Standard
10 pages
French language
sale 15% off
Standard
20 pages
English and French language
sale 15% off

30-Sep-2025
33.180.10
SC 86A

IEC

IEC 60793-2-60:2025(Main)

Optical fibres - Part 2-60: Product specifications - Sectional specification for class C single-mode interconnection fibres

IEC 60793-2-60:2025 is applicable to optical fibre types C1, C2, C3, and C4, as described in Table 1. These fibres are used for the interconnections within or between optical components systems and are optimized to support dense optical connectivity. While the fibres can be overcoated or buffered for the purpose of making protected pigtails, they can be used without overcoating. They can, however, be colour coded. This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) replacement of "intraconnection" with "interconnection" and addition of the definition of "interconnection fibres";
b) modification of the nominal MFD limit of C1 fibres;
c) addition of "Primary coating diameter-coloured" limits for class C fibres and change of "Primary coating diameter-uncoloured" limits for class C_80 fibres;
d) change of coating strip force limits for class C1, class C2, and class C3 fibres;
e) replacement of "Fibre cut-off wavelength" with "Cable cut-off wavelength" and revision of "Note b" in Table 6;
f) replacement of "Fibre cut-off wavelength" with "Cable cut-off wavelength" and deletion of the "Note" in Table 8;
g) addition of 200 μm coating diameter requirements for C1_125 fibres and change of coating diameters limits for C1_80 fibres in Table A.1;
h) addition of 200 µm coating diameter requirements for C1_125 fibres and change of coating strip force limits in Table A.2 and in Table A.5;
i) replacement of "Fibre cut-off wavelength" with "Cable cut-off wavelength", modification of the "Cable cut-off wavelength" limit and addition of a new "Note" in Table A.3;
j) addition of a transmission requirements at 1 625 nm and deletion of 1 310 nm for C1 fibres in Table A.4;
k) modification of "Fibre cut-off wavelength" limits of C3 fibres in Table C.3;
l) replacement of "Fibre cut-off wavelength" with "Cable cut-off wavelength" for C4 fibres in Table D.3.

Standard
67 pages
English language
sale 15% off

28-Sep-2025
33.180.10
SC 86A

IEC

IEC 60794-1-110:2025(Main)

Optical fibre cables - Part 1-110: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Kink, Method E10

IEC 60794-1-110:2025 defines test procedures used to establishing uniform requirements for mechanical performance - kink. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. IEC 60794-1-2 gives general requirements, definitions and a complete reference guide to test methods of all types.
This first edition cancels and replaces Method E10 of the first edition of IEC 60794-1-21:2015, which will be withdrawn. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
addition of "4.7";
addition of "Annex A".

Standard
8 pages
English language
sale 15% off
Standard
8 pages
French language
sale 15% off
Standard
16 pages
English and French language
sale 15% off

19-Aug-2025
33.180.10
SC 86A

Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay

Corrigendum 1 - Fibres optiques - Partie 1-49: Méthodes de mesure et procédures d'essai - Retard différentiel de mode

General Information

Relations

IEC 60793-1-49:2003/COR1:2005 - Corrigendum 1 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay Released:3/22/2005

Get Certified

TL 9000 QuEST Forum

ANCE

Intertek Slovenia

Frequently Asked Questions

Standards Content (Sample)

Questions, Comments and Discussion

This May Also Interest You