Power transformers - Part 6: Reactors

Applies to the following types of reactors: shunt reactors; series reactors including current-limiting reactors, neutral-earthing reactors, power flow control reactors, motor starting reactors, arc-furnace series reactors; filter (tuning) reactors; capacitor damping reactors; capacitor discharge reactors; earthing transformers (neutral couplers); arc-suppression reactors; smoothing reactors for HVDC and industrial application.

Transformateurs de puissance - Partie 6: Bobines d'inductance

S'applique aux types de bobines d'inductance suivants: bobines d'inductance shunt; bobines d'inductance série y compris les bobines d'inductance de limitation du courant, de mise à la terre du neutre, de commande de flux d'énergie, de démarrage des moteurs et les bobines d'inductance pour les fours à arc; bobines d'inductance de filtrage (d'accord); bobines d'inductance d'amortissement de condensateur; bobines d'inductance de décharge de condensateur; transformateurs de mise à la terre (connecteurs de neutre); bobines d'inductance d'extinction d'arc; bobines d'inductance de lissage pour application CCHT et industrielle.

General Information

Status
Published
Publication Date
12-Dec-2007
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Completion Date
13-Dec-2007
Ref Project

Buy Standard

Standard
IEC 60076-6:2007 - Power transformers - Part 6: Reactors
English and French language
242 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60076-6
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Power transformers –
Part 6: Reactors
Transformateurs de puissance –
Partie 6: Bobines d’inductance

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60076-6
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Power transformers –
Part 6: Reactors
Transformateurs de puissance –
Partie 6: Bobines d’inductance

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XF
CODE PRIX
ICS 29.180 ISBN 2-8318-9507-3
– 2 – 60076-6 © IEC:2007
CONTENTS
FOREWORD.9
INTRODUCTION.11

1 Scope.12
2 Normative references .12
3 Terms and definitions .13
3.1 Types of reactor .13
3.2 Other definitions.14
4 Symbols and abbreviations.17
5 Service conditions .18
5.1 General .18
5.2 Seismic conditions .18
6 Design, testing, tolerances and application.18
7 Shunt reactors.20
7.1 General .20
7.2 Design.20
7.3 Terms and definitions .20
7.4 Rating .21
7.4.1 Rated voltage .22
7.4.2 Maximum operating voltage .22
7.4.3 Rated power .22
7.4.4 Zero-sequence reactance of a three-phase star-connected reactor.22
7.4.5 Mutual reactance of a three-phase reactor.22
7.4.6 Inrush current level.22
7.4.7 Linearity of the shunt reactor .22
7.5 Temperature rise.22
7.6 Insulation level .23
7.7 Rating plates .23
7.8 Tests.23
7.8.1 General .23
7.8.2 Routine tests .23
7.8.3 Type tests .24
7.8.4 Special tests.24
7.8.5 Determination of reactance and linearity of reactance.24
7.8.6 Measurement of loss (routine test, special test) .25
7.8.7 Measurement of harmonics of the current (special test) .26
7.8.8 Measurement of zero-sequence reactance on three-phase reactors
(special test).27
7.8.9 Measurement of mutual reactance on three-phase reactors (special
test).27
7.8.10 Dielectric tests.27
7.8.11 Measurement of magnetic characteristic (special test) .30
7.8.12 Measurement of acoustic sound level (type test, special test).30
7.8.13 Measurement of vibration (type test).31
7.8.14 Temperature rise test (type test).32
7.9 Tolerances .33

60076-6 © IEC:2007 – 3 –
7.9.1 General .33
7.9.2 Tolerances on reactance at rated voltage and rated frequency .33
7.9.3 Tolerances on the linearity of reactance .33
7.9.4 Tolerance on loss .33
8 Current-limiting reactors and neutral-earthing reactors .33
8.1 General .33
8.2 Design.34
8.3 Terms and definitions .34
8.4 Rating .36
8.4.1 Rated continuous current.36
8.4.2 Rated thermal short-circuit current.37
8.4.3 Rated thermal short-circuit current duration .37
8.4.4 Rated mechanical short-circuit current.37
8.4.5 Rated short-time current.37
8.4.6 Rated short-time current duration or duty-cycle .37
8.4.7 Coupling factor .38
8.4.8 Rated short-circuit impedance .38
8.4.9 Rated short-time impedance .39
8.4.10 Rated continuous impedance.39
8.5 Ability to withstand rated thermal and rated mechanical short-circuit current .39
8.6 Temperature rise.39
8.6.1 Temperature rise at rated continuous current .39
8.6.2 Temperature due to rated thermal short-circuit current and rated
short-time current loading.40
8.7 Insulation level .40
8.7.1 General .40
8.8 Rating plates .40
8.9 Tests.41
8.9.1 General .41
8.9.2 Routine tests .41
8.9.3 Type tests .41
8.9.4 Special tests.42
8.9.5 Measurement of impedance at rated continuous current (routine test) .42
8.9.6 Measurement of impedance at rated short-time current (routine test).43
8.9.7 Measurement of loss (routine test, special test) .43
8.9.8 Separate source a.c. withstand voltage test (routine test, special
test).44
8.9.9 Winding overvoltage test for current-limiting reactors (routine test).44
8.9.10 Winding overvoltage test for neutral-earthing reactors (routine test) .45
8.9.11 Temperature rise test at rated continuous current (type test) .45
8.9.12 Lightning impulse test for current-limiting reactors (type test) .46
8.9.13 Short-circuit current test (special test) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.