iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60076-22-7:2020/COR1:2023

(Corrigendum)

Corrigendum 1 - Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings

Corrigendum 1 - Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings

Corrigendum 1 - Transformateurs de puissance - Partie 22-7: Transformateurs de puissance et bobines d'inductance - Accessoires et équipements

General Information

Status
Published
Publication Date
08-Jun-2023
ICS
29.180 - Transformers. Reactors
Technical Committee
TC 14 - Power transformers
Drafting Committee
WG 32 - TC 14/WG 32
Current Stage
PPUB - Publication issued
Start Date
27-Jul-2023
Completion Date
09-Jun-2023
Ref Project

Relations

Corrects
IEC 60076-22-7:2020 - Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings
Effective Date
05-Sep-2023

Buy Standard

IEC 60076-22-7:2020/COR1:2023 - Corrigendum 1 - Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings Released:6/9/2023IEC 60076-22-7:2020/COR1:2023 - Corrigendum 1 - Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings Released:6/9/2023
PreviousNext
Standard
IEC 60076-22-7:2020/COR1:2023 - Corrigendum 1 - Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings Released:6/9/2023
English and French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60076-22-7 IEC 60076-22-7
Edition 1.0  2020-05 Édition 1.0  2020-05

Power transformers – Transformateurs de puissance –

Part 22-7: Power transformer and reactor fittings Partie 22-7: Transformateur de puissance et
– Accessories and fittings bobines d'inductance – Accessoires et
équipements
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.
In Annex C, replace the line:
"V [dm ] = volume of insulating liquid in the transformer"
with the following:
"V [m ] = volume of insulating liquid in the transformer"
Additionally in Annex C, replace the li
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60076-19-1:2023(Main)
Power transformers - Part 19 - 1: Rules for the determination of uncertainties in the measurement of the losses of power transformers

IEC 60076-19-1:2023 defines the procedures that are applied to evaluate the uncertainty affecting the measurements of no-load and load losses during the routine tests on power transformers.
This document centres on measuring systems utilizing digital instruments, although the procedures can be adapted to evaluation of systems with analogue instruments where further uncertainty sources have to be taken into account.
This document specifies how to determine measurement uncertainty and how to apply corrections for known errors in the measurement chain. Information vis-à-vis judgement and traceability are given in IEC 60076-8:1997, 10.1 and 10.2.

  • Standard
    97 pages
    English and French language
    sale 15% off
IEC
IEC 60076-25:2023(Main)
Power transformers - Part 25: Neutral grounding resistors

IEC 60076-25:2023 applies to dry type natural air-cooled resistors, for neutral grounding of transformers and generators, in order to limit the earth fault current in power systems by means of metallic resistive elements.
For the purposes of this document, the resistor can be:
used alone or in combination with other electrotechnical products not covered by this document, such as (but not limited to): a step-down single-phase transformer, an open triangle or zig-zag transformer (where the neutral point is not available) and a Petersen coil reactor (in order to increase active power contribution to the fault or reduce time constant for proper protection operation or both);
designed, manufactured and verified on a one-off basis or fully standardized and manufactured in quantity.
Both terms "neutral grounding resistor" (NGR) and "neutral earthing resistor" (NER) can be used. However, for the purposes of this document and in order to avoid any confusion with "neutral earthing reactor" (NER), the term "neutral grounding resistor" (NGR) is used.
This document specifies:
the characteristics of the NGR;
the service conditions requirements for NGRs;
the tests and test methods for confirming that these conditions have been met;
the requirements relating to marking for NGRs.
Annex A provides guidance on how to consider the effect of resistance variation with temperature.

  • Standard
    46 pages
    English and French language
    sale 15% off
IEC
IEC 60076-22-8:2021(Main)
Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks

IEC 60076-22:2021 applies to a selection of accessories and fittings mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with or without conservator for indoor or outdoor installation.
It outlines the operation requirements specific to each device as well as the data made available to the communication network and the type and routine test to be performed.

  • Standard
    42 pages
    English and French language
    sale 15% off
IEC
IEC 60076-22-5:2021(Main)
Power transformers - Part 22-5: Power transformer and reactor fittings - Electric pumps for transformers

IEC 60076-22-5:2021 covers electric pumps used in the cooling circuits of power transformers and reactors. It applies to electric pumps mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation.
It outlines the operation requirements for the electrical and hydraulic performance, mechanical design, routine testing and type testing. Additionally, performance and dimensions of preferred sizes of pump sets are specified in informative annexes.
The pumps covered in this document are rotodynamic pumps driven by a squirrel cage induction motor that is immersed in the insulating liquid.
Pump sets conforming to this document can be of in-line or end suction design.

  • Standard
    49 pages
    English and French language
    sale 15% off
IEC
IEC 60076-22-6:2021(Main)
Power transformers - Part 22-6: Power transformer and reactor fittings - Electric fans for transformers

IEC 60076-22-6:2021 covers the electric fans used in the cooling circuits of power transformers and reactors. It applies to electric fans mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to all the equipment.
The electric fans concerned by this document are of the axially operating type and are for use on liquid to air coolers and for blowing out radiators.
This document also outlines the operation requirements specific to each equipment as well as the preferred dimensions relevant for interchangeability and uniform fan assembly and the type and routine tests to be performed.

  • Standard
    33 pages
    English and French language
    sale 15% off
IEC
IEC 60076-10-1:2016/AMD1:2020(Amendment)
Amendment 1 - Power transformers - Part 10-1: Determination of sound levels - Application guide
  • Standard
    3 pages
    English language
    sale 15% off
IEC
IEC 60076-11:2018/ISH1:2020(Main)
Interpretation sheet 1 - Power transformers - Part 11: Dry-type transformers
  • Standard
    2 pages
    English language
    sale 15% off
IEC
IEC 60076-24:2020(Main)
Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)

IEC 60076-24:2020 applies to medium power transformers from 25 kVA up to 3 150 kVA with highest voltage for equipment up to 36 kV, or in low voltage (LV) networks with highest voltage for equipment of up to 1,1 kV equipped with voltage regulating devices. Voltage regulating distribution transformers are transformers equipped with components to control primary or secondary voltage for on-load voltage regulation purposes. The main objective of the installation of a VRDT is to regulate the LV network voltage level (i.e. 400 V), to avoid violation of the limits defined by relevant standards or regulations. The VRDT must operate properly as a step down and step up transformer. Transformers covered by this document comply with the relevant requirements set out in IEC 60076 (all parts) and, unless otherwise stated in this document, they also comply with European Standards EN 50160 and EN 50588-1.

  • Standard
    22 pages
    English and French language
    sale 15% off
IEC
IEC 60076-22-7:2020(Main)
Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings

IEC 60076-22-7:2020 applies to a selection of accessories and fittings mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076­6 with or without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical requirements that are common to all the accessories and fittings. This document also outlines the operation requirements specific to each device as well as the preferred dimensions relevant for interchangeability and the type and routine test to be performed.This document covers an exhaustive selection of the accessories and fittings that are currently used on transformers or reactors.
The contents of the corrigendum of June 2023 have been included in this copy.

  • Standard
    127 pages
    English and French language
    sale 15% off
IEC
IEC TR 60076-26:2020(Main)
Power transformers - Part 26: Functional requirements of insulating liquids for use in power transformers

IEC TR 60076-26: 2020 which is a Technical Report, provides the functional requirements of insulating liquids that are considered necessary for use in power transformers, including, for example, reactors and HVDC transformers, are assembled and listed. A relevance index of importance for design and for service as well as the status of validation is given for all individual requirements (parameters). All parameters are assigned to one of the following categories:
General (physical / chemical)
Dielectric / Insulation
Thermal / Cooling
Ageing and Stability
Liquid-solid system
Material compatibility  The document is intended to serve as a general reference document for the transformer industry, including liquid suppliers as well as relevant scientific and technical bodies dealing with insulating liquids (materials).

  • Technical report
    14 pages
    English language
    sale 15% off