Amendment 2 - Low-voltage switchgear and controlgear - Part 1: General rules

Amendement 2 - Appareillage à basse tension - Partie 1: Règles générales

General Information

Status
Published
Publication Date
08-Sep-2014
Current Stage
DELPUB - Deleted Publication
Completion Date
22-Apr-2020
Ref Project

Relations

Buy Standard

Standard
IEC 60947-1:2007/AMD2:2014 - Amendment 2 - Low-voltage switchgear and controlgear - Part 1: General rules Released:9/9/2014
English and French language
102 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60947-1 ®
Edition 5.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Low-voltage switchgear and controlgear –
Part 1: General rules
Appareillage à basse tension –
Partie 1: Règles générales
IEC 60947-1:2007-06/AMD2:2014-09(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60947-1 ®
Edition 5.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Low-voltage switchgear and controlgear –

Part 1: General rules
Appareillage à basse tension –

Partie 1: Règles générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 29.130.20 ISBN 978-2-8322-1798-6

– 2 – IEC 60947-1:2007/AMD2:2014

© IEC 2014
FOREWORD
This amendment has been prepared by subcommittee 17B: Low-voltage switchgear and

controlgear, of IEC technical committee 17: Switchgear and controlgear.

The text of this amendment is based on the following documents:

FDIS Report on voting
121A/15/FDIS 121A/21/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
_____________
1.1 Scope and object
Replace the existing text of this subclause by the following new text:
This standard applies, when required by the relevant product standard, to low-voltage

switchgear and controlgear hereinafter referred to as "equipment" or "device" and intended to
be connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or
1 500 V d.c.
This standard states the general rules and common safety requirements for low-voltage
switchgear and controlgear, including:
– definitions;
– characteristics;
– information supplied with the equipment;
– normal service, mounting and transport conditions;
– constructional and performance requirements;
– verification of characteristics and performance;
– environmental aspects.
© IEC 2014
This standard does not apply to low-voltage switchgear and controlgear assemblies which are

dealt with in IEC 61439 series, as applicable.

1.2 Normative references
Delete the existing reference to "IEC 60439-1:1999" and its Amendment 1.

Replace the existing references by the following new references:

IEC 60664-1:2007, Insulation coordination for equipment within low-voltage systems – Part 1:

Principles, requirements and tests

IEC 61000-3-3:2013, Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for
equipment with rated current ≤16 A per phase and not subject to conditional connection
IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) – Part 4-2: Testing and
measurement techniques – Electrostatic discharge immunity test
IEC 61000-4-4:2012, Electromagnetic compatibility (EMC) – Part 4-4: Testing and
measurement techniques – Electrical fast transient/burst immunity test
IEC 61000-4-6:2013, Electromagnetic compatibility (EMC) – Part 4-6: Testing and
measurement techniques – Immunity to conducted disturbances, induced by radio-frequency
fields
IEC 61000-4-8:2009, Electromagnetic compatibility (EMC) – Part 4-8: Testing and
measurement techniques – Power frequency magnetic field immunity test
CISPR 11:2009, Industrial, scientific and medical equipment – Radio-frequency disturbance
characteristics – Limits and methods of measurement
Amendment 1 (2010)
Add, to the existing references, the new amendments as follows:
IEC 60947-5-1:2003, Low-voltage switchgear and controlgear – Part 5-1: Control circuit
devices and switching elements – Electromechanical control circuit devices
Amendment 1 (2009)
IEC 61000-3-2:2005, Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment input current ≤ 16 A per phase)
Amendment 1 (2008)
Amendment 2 (2009)
IEC 61000-4-3:2006, Electromagnetic compatibility (EMC) – Part 4-3: Testing and
measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test
Amendment 1 (2007)
Amendment 2 (2010)
IEC 61000-4-13:2002, Electromagnetic compatibility (EMC) – Part 4-13: Testing and
measurement techniques – Harmonics and interharmonics including mains signalling at a.c.
power port, low-frequency immunity tests
Amendment 1 (2009)
Add the following new normative references as follows:

– 4 – IEC 60947-1:2007/AMD2:2014

© IEC 2014
IEC 60092-504:2001, Electrical installations in ships – Part 504: Special features – Control

and instrumentation
IEC 60300-3-5:2001, Dependability management – Part 3-5: Application guide – Reliability

test conditions and statistical test principles

IEC 61508 (all parts), Functional safety of electrical/electronic/programmable electronic

safety-related systems
IEC 61649:2008, Weibull analysis

IEC 62061:2005, Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
IEC 62430:2009, Environmentally conscious design for electrical and electronic products
IEC 62474:2012, Material declaration for products of and for the electrotechnical industry
ISO 13849-1:2006, Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design
2 Definitions
Replace, in the alphabetical list, the existing references to these terms, modified by
Amendment 1, by the following new references:
Electronically controlled electromagnet . 2.3.36
Maximum cross-section . 2.3.35
Minimum cross-section . 2.3.34
Multiple tip contact system . 2.3.33
Replace, in the alphabetical list, the entry "Over-current discrimination" by the following new
entry:
Over-current selectivity . 2.5.23
Add, in the alphabetical list, the following new terms and references:
Flexible conductor . 2.3.32
Individual enclosure . 2.2.23
Insulation coordination barrier . 2.1.23

Rated control circuit supply voltage . 2.5.67
Rated control circuit voltage . 2.5.66
Rigid conductor . 2.3.31
Solid conductor . 2.3.29
Solid insulation . 2.1.22
Stranded conductor . 2.3.30

2.1 General terms
Add, at the end of the existing subclause, the following new terms and definitions:
2.1.22
solid insulation
solid insulating material interposed between two conductive parts

© IEC 2014
2.1.23
insulation coordination barrier

solid insulating material that is not an integral part, provided for the purpose of increasing

either creepage distances or clearance distances or both
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.