EN IEC 60079-7:2015/A1:2018

SLOVENSKI STANDARD
SIST EN 60079-7:2016/A1:2018
01-maj-2018
(NVSOR]LYQHDWPRVIHUHGHO=DãþLWDRSUHPHVSRYHþDQRYDUQRVWMRH
'RSROQLOR$,(&$
Explosive atmospheres - Part 7: Equipment protection by increased safety "e" (IEC
60079-7:2015/A1:2017)
Explosionsgefährdete Bereiche - Teil 7: Geräteschutz durch erhöhte Sicherheit "e"
Atmosphères explosives - Partie 7: Protection du matériel par sécurité augmentée "e"
Ta slovenski standard je istoveten z: EN IEC 60079-7:2015/A1:2018
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
SIST EN 60079-7:2016/A1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 60079-7:2016/A1:2018
SIST EN 60079-7:2016/A1:2018
EUROPEAN STANDARD EN IEC 60079-7:2015/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2018
ICS 29.260.20
English Version
Explosive atmospheres - Part 7: Equipment protection by
increased safety "e"
(IEC 60079-7:2015/A1:2017)
Atmosphères explosives - Partie 7: Protection du matériel Explosionsgefährdete Bereiche - Teil 7: Geräteschutz durch
par sécurité augmentée "e" erhöhte Sicherheit "e"
(IEC 60079-7:2015/A1:2017) (IEC 60079-7:2015/A1:2017)
This amendment A1 modifies the European Standard EN 60079-7:2015; it was approved by CENELEC on 2017-09-08. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60079-7:2015/A1:2018 E

SIST EN 60079-7:2016/A1:2018
European foreword
The text of document 31/1301/CDV, future IEC 60079-7:2015/A1, prepared by IEC/TC 31 "Explosive
atmospheres" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2018-07-19
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-01-19
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 60079-7:2015/A1:2017 was approved by CENELEC as a
European Standard without any modification.
SIST EN 60079-7:2016/A1:2018
Annex ZZ
(informative)
Relationship between this European standard and the essential requirements
of 2014/34/EU [2014 OJ L96] aimed to be covered

This European Standard has been prepared under a Commission’s standardisation request
M/BC/CEN/92/46 to provide one voluntary means of conforming to essential requirements of
2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation
of the laws of the Member States relating to equipment and protective systems intended for use in
potentially explosive atmospheres (recast).

Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.

Table ZZ.1 – Correspondence between this European standard and Annex II of Directive
2014/34/EU [2014 OJ L96]
Essential Requirements of Clause(s) / sub-clause(s)
Remarks / Notes
2014/34/EU of this EN
1.0.1. All clauses This is the purpose of the
Standard.
1.0.2. 4.2 / 4.3 / 4.4 / 4.6 / 5.2 / 5.3 /
5.4 / 5.6 / 5.8 / 5.9 / A.3 / A.5 /
B.4.2
1.0.2. 4/ 5 /A/B//F/G//H
1.0.3. 5.2 / 5.3 / 5.6
1.0.3. 5.2 / 5.3 / 5.6
1.0.4. 4.2 / 4.6 / 4.8
1.0.4. 4.2 / 4.6 / 4.8
1.0.5. 5.2 / 5.3 / 5.7 / 5.9 / 8.1 / 8.2 /
9.4
1.0.5. 9
1.0.6. 5.7 / 8.2
1.0.6. 9.3
1.1.1. 5.6 / 4.2
1.1.1. 4.2/ 5.6 /
1.1.2. 4.6 / 4.7
...