iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50083-2:2012/A1:2015

(Amendment)

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

2018-04-12 - standard can be offered for EMC - D159/C070
2014-06-10 GVN: Tolerance allocated on Secretary's request (see tcminares on 2014-06-10).
D145/080: NWI approved
2021: CLC legacy converted by DCLab NISOSTS

Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 2: Elektromagnetische Verträglichkeit von Geräten

Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs - Partie 2: Compatibilité électromagnétique pour les matériels

Kabelska omrežja za televizijske signale, zvokovne signale in interaktivne storitve - 2. del: Elektromagnetna združljivost opreme

General Information

Status
Published
Publication Date
05-Nov-2015
Withdrawal Date
13-Sep-2018
ICS
33.060.40 - Cabled distribution systems
Technical Committee
CLC/TC 209 - Cable networks for television signals, sound signals and interactive services
Drafting Committee
CLC/TC 209 - Cable networks for television signals, sound signals and interactive services
Current Stage
6060 - Document made available - Publishing
Start Date
06-Nov-2015
Due Date
25-Jun-2016
Completion Date
06-Nov-2015
Directive
2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
Mandate
M/536 - [C(2015)536] Standardisation request as regards radio equipment in support of Directive 2014/53/EU
M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
Ref Project
SIST EN 50083-2:2012/A1:2016 - Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

Relations

Amends
EN 50083-2:2012 - Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
Effective Date
28-Jan-2023

Buy Standard

EN 50083-2:2012/A1:2016EN 50083-2:2012/A1:2016
PreviousNext
Amendment
EN 50083-2:2012/A1:2016
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2016
Kabelska omrežja za televizijske signale, zvokovne signale in interaktivne storitve
- 2. del: Elektromagnetna združljivost opreme
Cable networks for television signals, sound signals and interactive services - Part 2:
Electromagnetic compatibility for equipment
Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 2:
Elektromagnetische Verträglichkeit von Geräten
Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion
sonore et services interactifs - Partie 2: Compatibilité électromagnétique pour les
matériels
Ta slovenski standard je istoveten z: EN 50083-2:2012/A1:2015
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50083-2:2012/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2015
ICS 33.060.40
English Version
Cable networks for television signals, sound signals and
interactive services - Part 2: Electromagnetic compatibility for
equipment
Réseaux de distribution par câbles pour signaux de Kabelnetze für Fernsehsignale, Tonsignale und interaktive
télévision, signaux de radiodiffusion sonore et services Dienste - Teil 2: Elektromagnetische Verträglichkeit von
interactifs - Partie 2: Compatibilité électromagnétique pour Geräten
les matériels
This amendment A1 modifies the European Standard EN 50083-2:2012; it was approved by CENELEC on 2015-09-14. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Li
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60728-113:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2024

IEC 60728-113:2023 is applicable to optical transmission systems for broadcast signal transmission that consist of headend equipment, optical transmission lines, in-house wirings and system outlets. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for optical distribution systems between headend equipment and system outlets in order to assess the system performance and its performance limits. In this document, the upper signal frequency is limited to about 3 300 MHz. The purpose of this part of IEC 60728 is to describe the system specifications of FTTH (fibre to the home) networks for digitally modulated broadcast signal transmission. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the performance of the optical portion of the system defined in this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces the xPON system as a physical layer media. The detailed description of the physical layer is out of scope of this document. The scope is limited to downstream RF video signal transmission over FTTH; IP transport technologies, such as IP Multicast and associate protocols, which require a two-way optical transmission system, are out of scope of this document. Some interference effects occurring between the telecommunication system and the broadcast system are addressed in Clause 7. IEC 60728-113:2023 cancels and replaces the first edition published in 2018 and IEC 60728-13-1:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) IEC 60728-13-1, which deals with the bandwidth expansion for broadcast signal over FTTH systems, has been merged with this document; b) a table containing the digital signal level at the system outlet has been added.

  • Standard
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-106:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 106: Optical equipment for systems loaded with digital channels only
SIST EN IEC 60728-106:2024

IEC 60728-106:2023 lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for television signals, sound signals and interactive services loaded with digital channels only. This document • applies to all optical transmitters, receivers, amplifiers, directional couplers, isolators, multiplexing devices, connectors and splices used in cable networks; • covers the frequency range 5 MHz to 3 300 MHz; • identifies guaranteed performance requirements for certain parameters; • lays down data publication requirements with guaranteed performance; • describes methods of measurement for compliance testing. All requirements and published data relate to minimum performance levels within the specified frequency range and in well-matched conditions as might be applicable to cable networks for television signals, sound signals and interactive services.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-11:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
SIST EN IEC 60728-11:2024

This part of IEC 60728 deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans. Additional requirements may be applied, for example, referring to: • electrical installations of buildings and overhead lines, • other telecommunication services distribution systems, • water distribution systems, • gas distribution systems, • lightning systems. This document is intended to provide requirements specifically for the safety of the system, personnel working on it, subscribers and subscriber equipment. It deals only with safety aspects and is not intended to define a standard for the protection of the equipment used in the system.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-115:2022(Main)
Cable networks for television signals, sound signals and interactive services - Part 115: In-building optical systems for broadcast signal transmissions
SIST EN IEC 60728-115:2022

This part of IEC 60728 is applicable to in-building optical transmission systems for broadcast signal transmission that consist of optical transmitter, optical amplifiers, splitters, V-ONUs, etc. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for in-building optical distribution systems between building network interface (BNI) and home network interface (HNI) in order to assess the system performance and its performance limits. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the requirements of optical section of this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over an FTTH network and introduces xPON system as a physical layer media. The detailed description of the physical layer is out of the scope of this document. The scope is limited to RF signal transmission over optical network, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols. This standard specifies the required system performance of all-optical building networks in order to connect with FTTH networks which are defined by IEC60728-113 and IEC60728-13-1. Use of In-building optical networks is very effective for saving cost (installation and maintenance) and enabling future network up-grades, especially in huge apartment buildings. In this document, the optical wavelengths and electrical frequency bands listed in Table 1 - and Table 2 - are considered to be used. [Table 1 and Table 2]

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50083-2-4:2019(Main)
Cable networks for television signals, sound signals and interactive services - Part 2-4: Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands for DTT reception
SIST EN 50083-2-4:2020

This document provides requirements for passive filters intended to reduce RF interference from mobile Base Stations (BS) and User Equipment (UE) to receiving equipment and master antenna cable distribution systems of broadcast DVB-T and DVB-T2 signals in the VHF and UHF bands. While primarily intended to be used with VHF/UHF DVB-T and DVB-T2 receivers and signal distribution systems, filters can also be useful for mitigation of interference to VHF FM or DAB radio.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-113:2018/AC:2018-12(Corrigendum)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2019/AC:2019

IEC - Corrected version

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60728-11:2017/A11:2018(Amendment)
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
SIST EN 60728-11:2018/A11:2019

contains Common Modifications to IEC 60728-11:2016 (the RD for EN 60728-11:2017) in response to the comments raised by the LVD New Approach Consultant in his negative assessment of IEC 60728-11.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-113:2018(Main)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2019

IEC 60728-113:2018 is applicable to optical transmission systems for broadcast signal transmission that consist of headend equipment, optical transmission lines, in-house wirings and system outlets. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for optical distribution systems between headend equipment and system outlets in order to assess the system performance and its performance limits. In this document, the upper signal frequency is limited at about 1 000 MHz. For systems requiring more bandwidth, refer to IEC 60728-13-1. The purpose of this part of IEC 60728 is to describe the system specifications of FTTH (fibre to the home) networks for digitally modulated broadcast signal transmission. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the optical portion of this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces xPON system as a physical layer media. The detailed description of the physical layer is out of the scope of this document. The scope is limited to RF signal transmission over FTTH, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols. Some interference descriptions between the telecommunication system and the broadcast system are addressed in Clause 7.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50083-2-3:2018(Main)
Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters
SIST-TS CLC/TS 50083-2-3:2019

This Technical Specification provides requirements to passive filters intended to reduce RF interference from LTE Base Stations (LTE-BS) and LTE User Equipment (LTE-UE) to receiving equipment and cable distribution systems of broadcast DVB-T and DVB-T2 signals in the VHF and UHF bands. While primarily intended to be used with VHF/UHF DVB-T and DVB-T2 receivers and signal distribution systems, filters can also be useful for mitigation of interference to VHF FM or DAB radio.

  • Technical specification
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-3:2018(Main)
Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
SIST EN IEC 60728-3:2018

NEW!IEC 60728-3:2017 is available as IEC 60728-3:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60728-3:2017 specifies the measuring methods, performance requirements and data publication requirements for active wideband equipment of cable networks for television signals, sound signals and interactive services. This fifth edition cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) extension of upper frequency range limit for cable network equipment in the forward path from 1 000 MHz to 1 218 MHz (optional up to 1 794 MHz); b) extension of upper frequency range limit for cable network equipment in the return path from 85 MHz to 204 MHz; c) integration and update of IEC 60728-3-1 content; d) integration and update of the Technical Specification CLC/TS 50083-3-3 content; e) deletion of specifications and test methods for obsolete analogue parameters; f) additional normative references; g) additional terms and definitions and abbreviations.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day