EN 61784-3-2:2017

SLOVENSKI STANDARD
01-februar-2018
1DGRPHãþD
SIST EN 61784-3-2:2010
Industrijska komunikacijska omrežja - Profili - 3-2. del: Funkcijska varnost
procesnih vodil - Dodatne specifikacije za CPF 2 (IEC 61784-3-2:2016)
ndustrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses -
Additional specifications for CPF 2 (IEC 61784-3-2:2016)
Industrielle Kommunikationsnetze - Profile - Teil 3-2: Funktional sichere Übertragung bei
Feldbussen - Zusätzliche Festlegungen für die Kommunikationsprofilfamilie 2 (IEC 61784
-3-2:2016)
Réseaux de communication industriels - Profils - Partie 3-2: Bus de terrain de sécurité
fonctionnelle - Spécifications supplémentaires pour CPF 2 (IEC 61784-3-2:2016)
Ta slovenski standard je istoveten z: EN 61784-3-2:2017
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61784-3-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2017
ICS 25.040.40; 35.100.05 Supersedes EN 61784-3-2:2010
English Version
Industrial communication networks - Profiles - Part 3-2:
Functional safety fieldbuses - Additional specifications for CPF 2
(IEC 61784-3-2:2016)
Réseaux de communication industriels - Profils - Partie 3-2: Industrielle Kommunikationsnetze - Profile - Teil 3-2:
Bus de terrain de sécurité fonctionnelle - Spécifications Funktional sichere Übertragung bei Feldbussen -
supplémentaires pour CPF 2 Zusätzliche Festlegungen für die
(IEC 61784-3-2:2016) Kommunikationsprofilfamilie 2
(IEC 61784-3-2:2016)
This European Standard was approved by CENELEC on 2016-08-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61784-3-2:2017 E
European foreword
The text of document 65C/851/FDIS, future edition 3 of IEC 61784-3-2, prepared by SC 65C
"Industrial networks", of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-3-2:2017.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-05-10
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-11-10
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61784-3-2:2010.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61784-3-2:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61000-6-7 NOTE Harmonized as EN 61000-6-7.
IEC 61131-6 NOTE Harmonized as EN 61131-6.
IEC 61158 (all parts) NOTE Harmonized as EN 61158 (all parts).
IEC 61496 (all parts) NOTE Harmonized as EN 61496 (all parts).
IEC 61508-1:2010 NOTE Harmonized as EN 61508-1:2010 (not modified).
IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified).
IEC 61508-5:2010 NOTE Harmonized as EN 61508-5:2010 (not modified).
IEC 61511 (all parts) NOTE Harmonized as EN 61511 (all parts).
IEC 61784-5 (all parts) NOTE Harmonized as EN 61784-5 (all parts).
IEC 61800-5-2 NOTE Harmonized as EN 61800-5-2.
IEC 62061 NOTE Harmonized as EN 62061.
IEC 62443 (all parts) NOTE Harmonized as prEN 62443 (all parts)
IEC/TR 62685 NOTE Harmonized as CLC/TR 62685.
ISO 10218-1 NOTE Harmonized as EN ISO 10218-1.
ISO 12100 NOTE Harmonized as EN ISO 12100.
ISO 13849 (all parts) NOTE Harmonized as EN ISO 13849 (all parts).
IEC 62026-3 NOTE Harmonized as EN 62026-3.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 61131-2 -  Industrial-process measurement and control EN 61131-2 -
– Programmable controllers – Part 2:
Equipment requirements and tests
IEC 61131-3 -  Programmable controllers - Part 3: EN 61131-3 -
Programming languages
IEC 61158-2 -  Industrial communication networks - EN 61158-2 -
Fieldbus specifications - Part 2: Physical
layer specification and service definition
IEC 61158-3-2 -  Industrial communication networks - EN 61158-3-2 -
Fieldbus specifications - Part 3-2: Data-link
layer service definition - Type 2 elements
IEC 61158-3-19 -  Industrial communication networks - EN 61158-3-19 -
Fieldbus specifications - Part 3-19: Data-link
layer service definition - Type 19 elements
IEC 61158-4-2 -  Industrial communication networks - EN 61158-4-2 -
Fieldbus specifications - Part 4-2: Data-link
layer protocol specification - Type 2
elements
IEC 61158-4-19 -  Industrial communication networks - EN 61158-4-19 -
Fieldbus specifications - Part 4-19: Data-link
layer protocol specification - Type 19
elements
IEC 61158-5-2 -  Industrial communication networks - EN 61158-5-2 -
Fieldbus specifications - Part 5-2:
Application layer service definition - Type 2
elements
IEC 61158-5-19 -  Industrial communication networks - EN 61158-5-19 -
Fieldbus specifications - Part 5-19:
Application layer service definition - Type 19
elements
IEC 61158-6-2 -  Industrial communication networks - EN 61158-6-2 -
Fieldbus specifications - Part 6-2:
Application layer protocol specification -
Type 2 elements
IEC 61158-6-19 -  Industrial communication networks - EN 61158-6-19 -
Fieldbus specifications - Part 6-19:
Application layer protocol specification -
Type 19 elements
IEC 61326-3-1 -  Electrical equipment for measurement, EN 61326-3-1 -
control and laboratory use - EMC
requirements - Part 3-1: Immunity
requirements for safety-related systems and
for equipment intended to perform safety-
related functions (functional safety) -
General industrial applications
IEC 61326-3-2 -  Electrical equipment for measurement, - -
control and laboratory use ¿ EMC
requirements ¿ Part 3-2: Immunity
requirements for safety-related systems and
for equipment intended to perform safety-
related functions (functional safety) ¿
Industrial applications with specified
electromagnetic environment
IEC 61508 series Functional safety of EN 61508 series
electrical/electronic/programmable electronic
safety-related systems
IEC 61784-1 -  Industrial communication networks - Profiles EN 61784-1 -
- Part 1: Fieldbus profiles
IEC 61784-2 -  Industrial communication networks - Profiles EN 61784-2 -
- Part 2: Additional fieldbus profiles for real-
time networks based on ISO/IEC 8802-3
IEC 61784-3 -  Industrial communication networks - Profiles EN 61784-3 -
- Part 3: Functional safety fieldbuses -
General rules and profile definitions
IEC 61784-5-2 -  Industrial communication networks - Profiles EN 61784-5-2 -
- Part 5-2: Installation of fieldbuses -
Installation profiles for CPF 2
IEC 61918 (mod) -  Industrial communication networks - EN 61918 -
Installation of communication networks in
industrial premises
ISO 13849-1 2006 Safety of machinery - Safety-related parts of EN ISO 13849-1 2008
control systems - Part 1: General principles
for design
ISO 15745-2 2003 Industrial automation systems and - -
integration - Open systems application
integration framework - Part 2: Reference
description for ISO 11898-based control
systems
ISO 15745-3 2003 Industrial automation systems and - -
integration - Open systems application
integration framework - Part 3: Reference
description for IEC 61158 based control
systems
ISO 15745-4 2003 Industrial automation systems and - -
integration - Open systems application
integration framework - Part 4: Reference
description for Ethernet-based control
systems
IEC 61784-3-2 ®
Edition 3.0 2016-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –

Part 3-2: Functional safety fieldbuses – Additional specifications for CPF 2

Réseaux de communication industriels – Profils –

Partie 3-2: Bus de terrain de sécurité fonctionnelle – Spécifications

supplémentaires pour CPF 2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40, 35.100.05 ISBN 978-2-8322-3480-8

– 2 – IEC 61784-3-2:2016  IEC 2016
CONTENTS
FOREWORD. 12
0 Introduction . 14
0.1 General . 14
0.2 Patent declaration . 16
1 Scope . 17
2 Normative references . 17
3 Terms, definitions, symbols, abbreviated terms and conventions . 19
3.1 Terms and definitions . 19
3.1.1 Common terms and definitions . 19
3.1.2 CPF 2: Additional terms and definitions . 24
3.2 Symbols and abbreviated terms . 24
3.2.1 Common symbols and abbreviated terms . 24
3.2.2 CPF 2: Additional symbols and abbreviated terms. 25
3.3 Conventions . 26
4 Overview of FSCP 2/1 (CIP Safety™) . 26
4.1 General . 26
4.2 FSCP 2/1 . 26
5 General . 27
5.1 External documents providing specifications for the profile . 27
5.2 Safety functional requirements . 28
5.3 Safety measures . 28
5.4 Safety communication layer structure . 29
5.5 Relationships with FAL (and DLL, PhL) . 30
5.5.1 General . 30
5.5.2 Data types . 30
6 Safety communication layer services . 30
6.1 Introduction .
...