EN 62282-6-200:2012

SLOVENSKI STANDARD
01-december-2012
1DGRPHãþD
SIST EN 62282-6-200:2008
Tehnologija gorivnih celic - 6-200. del: Tehnologija mikro gorivnih celic -
Preskusne metode delovanja
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test
methods
Brennstoffzellentechnologien - Teil 6-200: Mikrobrennstoffzellen-Energiesysteme -
Leistungskennwerteprüfverfahren
Technologies des piles à combustible - Partie 6-200: Systèmes à micro-piles à
combustible - Méthodes d'essai des performances
Ta slovenski standard je istoveten z: EN 62282-6-200:2012
ICS:
27.070 Gorilne celice Fuel cells
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62282-6-200
NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM
ICS 27.070 Supersedes EN 62282-6-200:2008

English version
Fuel cell technologies -
Part 6-200: Micro fuel cell power systems -
Performance test methods
(IEC 62282-6-200:2012)
Technologies des piles à combustible -  Brennstoffzellentechnologien -
Partie 6-200: Systèmes à micro-piles Teil 6-200: Mikrobrennstoffzellen-
à combustible - Energiesysteme -
Méthodes d'essai des performances Leistungskennwerteprüfverfahren
(CEI 62282-6-200:2012) (IEC 62282-6-200:2012)

This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62282-6-200:2012 E

Foreword
The text of document 105/394/FDIS, future edition 2 of IEC 62282-6-200, prepared by IEC/TC 105
"Fuel cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 62282-6-200:2012.
The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-08-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62282-6-200:2008.

EN 62282-6-200:2008:
a) changes have been incorporated to make this edition fuel independent:
- the definition of “fuel” is now consistent with that of IEC/TS 62282-1:2010;
- the restriction on specific fuels (methanol or methanol/water solution, formic acid, hydrogen,
methanol clathrate compound, borohydride compound, butane, etc.) has been lifted;
b) modification of definition of “off-state” to “standby state”;
c) in Clause 3, Terms and definitions, for the purposes of this document, IEC/TS 62282-1:2010
applies except for the following terms:
- conditioning;
- micro fuel cell power system;
- standby state; and
- starting duration.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62282-6-200:2012 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 62282-6-200:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60721-3-7 - Classification of environmental conditions - EN 60721-3-7 -
Part 3-7: Classification of groups of
environmental parameters and their
severities - Portable and non-stationary use

IEC/TS 62282-1 2010 Fuel cell technologies - - -
Part 1: Terminology
ISO 4677-1 - Atmospheres for conditioning and testing -- - -
Determination of relative humidity -
Part 1: Aspirated psychrometer method

ISO 4677-2 - Atmospheres for conditioning and testing - - -
Determination of relative humidity -
Part 2: Whirling psychrometer method

ISO/IEC 17025 - General requirements for the competence EN ISO/IEC 17025 -
of testing and calibration laboratories

IEC 62282-6-200 ®
Edition 2.0 2012-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fuel cell technologies –
Part 6-200: Micro fuel cell power systems – Performance test methods

Technologies des piles à combustible –

Partie 6-200: Systèmes à micro-piles à combustible – Méthodes d’essai des

performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX P
ICS 27.070 ISBN 978-2-83220-260-90

– 2 – 62282-6-200 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 General principles . 8
4.1 Testing environment . 8
4.2 Minimum required measurement accuracy . 8
4.3 Measuring instruments . 8
4.3.1 General . 8
4.3.2 Voltage . 8
4.3.3 Current . 8
4.3.4 Time . 8
4.3.5 Weight . 9
4.3.6 Temperature . 9
4.3.7 Humidity . 9
4.3.8 Pressure . 9
4.3.9 Vibration frequency. 9
4.3.10 Volume . 9
5 Tests . 9
5.1 Test procedure . 9
5.2 Power generation characteristics . 9
5.2.1 Starting duration . 9
5.2.2 Rated power test and rated voltage test . 10
5.2.3 Power generation test after disuse . 10
5.2.4 Power generation test at low and high temperatures . 10
5.2.5 Power generation test under low and high humidity conditions . 10
5.2.6 Altitude test . 10
5.3 Fuel consumption test . 11
5.4 Mechanical durability tests . 11
5.4.1 Drop test . 11
5.4.2 Vibration test . 12
6 Labelling and marking . 13
7 Test report . 13

Figure 1 – Typical example of a functional arrangement of a micro fuel cell power
system . 6

Table 1 – Drop height . 12
Table 2 – Vibration condition . 12
Table 3 – Test report of micro fuel cell power system – Performance test . 13

62282-6-200 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
FUEL CELL TECHNOLOGIES –
Part 6-200: Micro fuel cell power systems –
Performance test methods
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that th
...