EN 60143-2:2013
(Main)Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 60143-2:2012 covers protective equipment for series capacitor banks, with a size larger than 10 Mvar per phase. Protective equipment is defined as the main circuit apparatus and ancillary equipment, which are part of a series capacitor installation, but which are external to the capacitor part itself. The recommendations for the capacitor part are given in IEC 60143-1:2004. The protective equipment is mentioned in Clause 3 and 10.6 of IEC 60143-1:2004. This second edition cancels and replaces the first edition published in 1994. It constitutes a technical revision. The main changes with respect to the previous edition are: - updated with respect to new and revised component standards; - updates with respect to technology changes. Outdated technologies have been removed, i.e. series capacitors with dual self-triggered gaps. New technologies have been added, i.e. current sensors instead of current transformers; - the testing of spark gaps has been updated to more clearly specify requirements and testing procedures. A new bypass making current test replaces the old discharge current test; - Clause 5, Guide, has been expanded with more information about different damping circuits and series capacitor protections. Keywords: protective equipment for series capacitor banks
Reihenkondensatoren für Starkstromanlagen - Teil 2: Schutzeinrichtungen für Reihenkondensatorbatterien
Condensateurs série destinés à être installés sur des réseaux - Partie 2: Matériel de protection pour les batteries de condensateurs série
La CEI 60143-2:2012 concerne les matériels de protection pour les batteries de condensateurs série, de puissance supérieure à 10 Mvar par phase. Le matériel de protection est défini comme étant l'appareillage du circuit principal et du matériel auxiliaire, qui font partie de l'installation des condensateurs série, mais qui sont à l'extérieur de la partie constituée par les condensateurs eux-mêmes. Les recommandations pour la partie condensateur sont fournies dans la CEI 60143-1:2004. Les matériels de protection sont mentionnés aux 3 et 10.6 de la CEI 60143-1:2004. Cette deuxième édition annule et remplace la première édition publiée en 1994. Elle constitue une révision technique. Les modifications par rapport à l'édition précédente sont les suivantes: - mises à jour conformément aux nouvelles normes et aux normes révisées relatives aux composants; - mises à jour relatives aux évolutions technologiques. Les technologies obsolètes ont été retirées: condensateurs série à double éclateurs autodéclenchés. De nouvelles technologies ont été ajoutées: sondes de courant à la place des transformateurs de courant; - les essais des éclateurs ont été mis à jour pour décrire de manière plus claire les exigences et les procédures d'essai. Un nouvel essai au courant établi du shunt remplace l'ancien essai au courant de décharge; - L'Article 5, Guide, a été élargi avec plus d'information concernant les différents circuits d'amortissement et les protections de condensateurs série. Mots cles: protection pour les batteries de condensateurs série
Serijski kondenzatorji za elektroenergetske sisteme - 2. del: Zaščitna oprema za baterije serijskih kondenzatorjev
Ta del standarda IEC 60143 zajema zaščitno opremo za baterije serijskih kondenzatorjev, ki presegajo 10 Mvar po liniji. Zaščitna oprema je opredeljena kot aparat z glavnim vezjem in pomožno opremo, ki sta sestavni del inštalacije serijskega kondenzatorja, nista pa del samega kondenzatorja. Priporočila za sam kondenzator so podana v standardu IEC 60143-1:2004. Zaščitna oprema je omenjena v točkah 3 in 10.6 standarda IEC 60143-1:2004. Zaščitna oprema, obravnavana v tem standardu, obsega naslednje v nadaljevanju navedene elemente: – zaščita pred prenapetostjo, – zaščitno ločilno iskrišče, – varistor, – obvodno stikalo, – ločilniki in ozemljitvena stikala, – razelektritvena oprema za omejevanje toka in ublaževanje – napetostni transformator, – tokovni senzorji, – sklopni kondenzatorji, – opozorilni stolpec, – povezave ploščadi optičnih vlaken, – relejska zaščita, krmilna oprema in oprema za komunikacijo med ploščadjo in zemljo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2013
1DGRPHãþD
SIST EN 60143-2:2000
6HULMVNLNRQGHQ]DWRUML]DHOHNWURHQHUJHWVNHVLVWHPHGHO =DãþLWQDRSUHPD]D
EDWHULMHVHULMVNLKNRQGHQ]DWRUMHY
Series capacitors for power systems - Part 2: Protective equipments for series capacitor
banks
Condensateurs série destinés à ètre installés sur des réseaux - Partie 2: Matériel de
protection pour les batteries de condensateurs série
Ta slovenski standard je istoveten z: EN 60143-2:2013
ICS:
31.060.70 0RþQRVWQLNRQGHQ]DWRUML Power capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60143-2
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 29.240.99; 31.060.70 Supersedes EN 60143-2:1994
English version
Series capacitors for power systems -
Part 2: Protective equipment for series capacitor banks
(IEC 60143-2:2012)
Condensateurs série destinés Reihenkondensatoren für
à être installés sur des réseaux - Starkstromanlagen -
Partie 2: Matériel de protection pour les Teil 2: Schutzeinrichtungen für
batteries de condensateurs série Reihenkondensatorbatterien
(CEI 60143-2:2012) (IEC 60143-2:2012)
This European Standard was approved by CENELEC on 2013-01-15. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60143-2:2013 E
Foreword
The text of document 33/517/FDIS, future edition 2 of IEC 60143-2, prepared by IEC/TC 33 "Power
capacitors and their applications" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60143-2:2013.
The following dates are fixed:
(dop) 2013-12-14
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-01-15
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60143-2:1994.
EN 60143-2:1994:
- updated with respect to new and revised component standards;
- updates with respect to technology changes. Outdated technologies have been removed, i.e.
series capacitors with dual self-triggered gaps. New technologies have been added, i.e. current
sensors instead of current transformers;
- the testing of spark gaps has been updated to more clearly specify requirements and testing
procedures. A new bypass making current test replaces the old discharge current test;
- Clause 5, Guide, has been expanded with more information about different damping circuits and
series capacitor protections.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 60143-2:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE Harmonised as EN 60068-1.
IEC 60068-2-2 NOTE Harmonised as EN 60068-2-2.
IEC 60068-2-78 NOTE Harmonised as EN 60068-2-78.
IEC 60068-2-30 NOTE Harmonised as EN 60068-2-30.
IEC 60071-1 NOTE Harmonised as EN 60071-1.
IEC 60071-2 NOTE Harmonised as EN 60071-2.
IEC 60143-3 NOTE Harmonised as EN 60143-3.
IEC 60255-1 NOTE Harmonised as EN 60255-1.
IEC 60383-1 NOTE Harmonised as EN 60383-1.
- 3 - EN 60143-2:2013
IEC 60383-2 NOTE Harmonised as EN 60383-2.
IEC 60507 NOTE Harmonised as EN 60507.
IEC 60549 NOTE Harmonised as EN 60549.
IEC 60654-1 NOTE Harmonised as EN 60654-1.
IEC 60654-4 NOTE Harmonised as EN 60654-4.
IEC 60871-1 NOTE Harmonised as EN 60871-1.
IEC 60909 Series NOTE Harmonised as EN 60909 Series (not modified).
IEC 61000-4-2 NOTE Harmonised as EN 61000-4-2.
IEC 61000-4-11 NOTE Harmonised as EN 61000-4-11.
IEC 62217 NOTE Harmonised as EN 62217.
IEC 62271-100 NOTE Harmonised as EN 62271-100.
IEC 62223 NOTE Harmonised as EN 62223.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60044 Series Instrument transformers EN 60044 Series
IEC 60044-1 - Instrument transformers - EN 60044-1 -
Part 1: Current transformers
IEC 60044-8 - Instrument transformers - EN 60044-8 -
Part 8: Electronic current transformers
IEC 60060 Series High-voltage test techniques EN 60060 Series
IEC 60076-1 - Power transformers - EN 60076-1 -
Part 1: General
IEC 60076-6 2007 Power transformers - EN 60076-6 2008
Part 6: Reactors
IEC 60099-4 2004 Surge arresters - EN 60099-4 2004
(mod) Part 4: Metal-oxide surge arresters without
+ A1 2006 gaps for a.c. systems +A1 2006
+ A2 2009 +A2 2009
IEC 60143-1 2004 Series capacitors for power systems - EN 60143-1 2004
Part 1: General
IEC 60255-5 - Electrical relays - EN 60255-5 -
Part 5: Insulation coordination for measuring
relays and protection equipment -
Requirements and tests
IEC 60255-21-1 - Electrical relays - EN 60255-21-1 -
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment -
Section 1: Vibration tests (sinusoidal)
IEC 60270 - High-voltage test techniques - Partial EN 60270 -
discharge measurements
IEC 60358-1 - Coupling capacitors and capacitor dividers - EN 60358-1 -
Part 1: General rules
IEC 60358-2 - Coupling capacitors and capacitor dividers - EN 60358-2 -
Part 2: AC or DC single-phase coupling
capacitor connected between line and
ground for power line carrier-frequency
(PLC) application
IEC 60794-1-1 - Optical fibre cables - EN 60794-1-1 -
Part 1-1: Generic specification - General
IEC 60794-2 - Optical fibre cables - EN 60794-2 -
Part 2: Indoor cables - Sectional
specification
- 5 - EN 60143-2:2013
Publication Year Title EN/HD Year
IEC 61000-4-29 - Electromagnetic compatibility (EMC) - EN 61000-4-29 -
Part 4-29: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations on d.c. input power
port immunity tests
IEC 61109 - Insulators for overhead lines - Composite EN 61109 -
suspension and tension insulators for a.c.
systems with a nominal voltage greater than
1 000 V - Definitions, test methods and
acceptance criteria
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
IEC 61869-3 - Instrument transformers - EN 61869-3 -
Part 3: Additional requirements for inductive
voltage transformers
IEC 61869-5 - Instrument transformers - EN 61869-5 -
Part 5: Additional Requirements for capacitor
voltage transformers
IEC 62271-1 - High-voltage switchgear and controlgear - EN 62271-1 -
Part 1: Common specifications
IEC 62271-102 2001 High-voltage switchgear and controlgear - EN 62271-102 2002
+ corr. April 2002 Part 102: Alternating current disconnectors + corr. March 2005
+ corr. May 2003 and earthing switches + corr. July 2008
+ corr. February 2005
IEC 62271-109 2008 High-voltage switchgear and controlgear - EN 62271-109 2009
Part 109: Alternating-current series capacitor
by-pass switches
IEC 60143-2 ®
Edition 2.0 2012-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Series capacitors for power systems –
Part 2: Protective equipment for series capacitor banks
Condensateurs série destinés à être installés sur des réseaux –
Partie 2: Matériel de protection pour les batteries de condensateurs série
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 29.240.99; 31.060.70 ISBN 978-2-83220-546-4
– 2 – 60143-2 IEC:2012
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 9
4 Quality requirements and tests . 15
4.1 Overvoltage protector . 15
4.2 Protective spark gap . 16
4.2.1 Purpose . 16
4.2.2 Classification of triggering principles . 16
4.2.3 Tests . 16
4.3 Varistor . 21
4.3.1 Purpose . 21
4.3.2 Classification . 21
4.3.3 Tests . 22
4.4 Bypass switch . 26
4.5 Disconnectors and earthing switches . 26
4.5.1 Purpose . 26
4.5.2 Classification . 27
4.5.3 Tests . 27
4.6 Discharge current-limiting and damping equipment (DCLDE) . 28
4.6.1 Purpose . 28
4.6.2 Classification . 28
4.6.3 Tests . 28
4.7 Voltage transformer . 32
4.7.1 Purpose . 32
4.7.2 Classification . 32
4.7.3 Tests . 32
4.8 Current sensors . 33
4.8.1 Purpose . 33
4.8.2 Classification .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.