EN IEC 62769-101-1:2021

SLOVENSKI STANDARD
01-april-2021
Nadomešča:
SIST EN 62769-101-1:2015
Integracija procesne naprave (FDI) - 101-1. del: Profili - Osnovno procesno vodilo
H1 (IEC 62769-101-1:2020)
Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 (IEC 62769
-101-1:2020)
Feldgeräteintegration (FDI) - Teil 101-1: Profile - Foundation Fieldbus H1 (IEC 62769-
101-1:2020)
Intégration des appareils de terrain (FDI) - Partie 101-1: Profils - Foundation Fieldbus H1
(IEC 62769-101-1:2020)
Ta slovenski standard je istoveten z: EN IEC 62769-101-1:2021
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62769-101-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 25.040.40; 35.100.05 Supersedes EN 62769-101-1:2015 and all of its
amendments and corrigenda (if any)
English Version
Field device Integration (FDI) - Part 101-1: Profiles - Foundation
Fieldbus H1
(IEC 62769-101-1:2020)
Intégration des appareils de terrain (FDI) - Partie 101-1: Feldgeräteintegration (FDI) - Teil 101-1: Profile -
Profils - Foundation Fieldbus H1 Foundation Fieldbus H1
(IEC 62769-101-1:2020) (IEC 62769-101-1:2020)
This European Standard was approved by CENELEC on 2020-12-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-101-1:2021 E

European foreword
The text of document 65E/620/CDV, future edition 2 of IEC 62769-101-1, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-101-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-12-24
document have to be withdrawn
This document supersedes EN 62769-101-1:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62769-101-1:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62769-3 NOTE Harmonized as EN 62769-3
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-5-9 2014 Industrial communication networks - EN 61158-5-9 2014
Fieldbus specifications - Part 5-9:
Application layer service definition - Type 9
elements
IEC 61784-1 - Industrial communication networks - EN IEC 61784-1 -
Profiles Part 1: Fieldbus profiles
IEC 61784-2 - Industrial communication networks - EN IEC 61784-2 -
Profiles - Part 2: Additional fieldbus profiles
for real-time networks based on
ISO/IEC/IEEE 8802-3
IEC 61784-3 2016 Industrial communication networks - EN 61784-3 2016
Profiles - Part 3: Functional safety
fieldbuses - General rules and profile
definitions
IEC 61804 series Devices and integration in enterprise EN IEC 61804 series
systems - Function blocks (FB) for process
control and electronic device description
language (EDDL)
IEC 62541-6 - OPC Unified Architecture - Part 6: EN IEC 62541-6 -
Mappings
IEC 62541-100 2015 OPC Unified Architecture - Part 100: EN 62541-100 2015
Device Interface
IEC 62769-1 - Field device integration (FDI) - Part 1: EN 62769-1 -
Overview
IEC 62769-2 - Field Device Integration (FDI) - Part 2: FDI EN 62769-2 -
Client
Publication Year Title EN/HD Year
IEC 62769-4 - Field Device Integration (FDI) - Part 4: FDI EN 62769-4 -
Packages
IEC 62769-5 - Field Device Integration (FDI) - Part 5: FDI EN 62769-5 -
Information Model
IEC 62769-6 - Field Device Integration (FDI) - Part 6: FDI EN 62769-6 -
Technology Mapping
IEC 62769-7 - Field Device Integration (FDI) - Part 7: FDI EN 62769-7 -
Communication Devices
IEC 62769-101-1 ®
Edition 2.0 2020-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Field device integration (FDI) –

Part 101-1: Profiles – Foundation Fieldbus H1

Intégration des appareils de terrain (FDI) –

Partie 101-1: Profils – Foundation Fieldbus H1

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-9065-1

– 2 – IEC 62769-101-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and conventions . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 7
3.3 Conventions . 7
3.3.1 EDDL syntax. 7
3.3.2 XML syntax . 7
3.3.3 Capitalizations . 7
4 Profile for CP 1/1 (FOUNDATION™ H1) . 8
4.1 General . 8
4.2 Catalog profile . 8
4.2.1 Protocol support file . 8
4.2.2 CommunicationProfile definition . 8
4.2.3 Profile device . 8
4.2.4 Protocol version information . 8
4.3 Associating a Package with a CP 1/1 device . 9
4.3.1 Device type identification mapping . 9
4.3.2 Device type revision mapping . 9
4.4 Information Model mapping . 9
4.4.1 ProtocolType definition . 9
4.4.2 DeviceType mapping . 9
4.4.3 FunctionalGroup Identification definition . 10
4.4.4 BlockType property mapping . 10
4.4.5 Mapping to Block ParameterSet . 11
4.5 Topology elements . 11
4.5.1 ConnectionPoint definition . 11
4.5.2 Communication Device definition . 13
4.5.3 Communication service provider definition . 14
4.5.4 Network definition . 15
4.6 Methods . 16
4.6.1 Methods for FDI Communication Servers . 16
4.6.2 Methods for Gateways . 21
Annex A (normative) Topology scan schema . 22
A.1 General . 22
A.2 FoundationH1AddressT . 22
A.3 FoundationH1ConnectionPointT . 22
A.4 FoundationH1NetworkT . 23
A.5 Network . 23
A.6 FoundationBlockIdentificationT . 24
A.7 FoundationIdentificationT . 24
Annex B (normative) Transfer service parameters . 26
B.1 General . 26
B.2 receiveData . 26
B.3 sendData . 26

IEC 62769-101-1:2020 © IEC 2020 – 3 –
B.4 OperationT . 27
B.5 ResponseCodeT . 27
B.6 TransferResultDataT . 27
B.7 TransferSendDataT . 28
Annex C (informative) Communication service arguments for Transfer Method . 29
Bibliography . 30

Table 1 – Capability File part . 8
Table 2 – CommunicationProfile definition . 8
Table 3 – Device type catalog mapping . 9
Table 4 – ProtocolType Foundation_H1 definition .
...