Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification

IEC 60679-1:2017(E) specifies general requirements for piezoelectric, dielectric and electrostatic oscillators, including Dielectric Resonator Oscillators (DRO) and oscillators using FBAR (hereinafter referred to as "Oscillator"), of assessed quality using either capability approval or qualification approval procedures. NOTE Dielectric Resonator Oscillators (DRO) and oscillators using FBAR are under consideration. This edition includes the following significant technical changes with respect to the previous edition: a) the title has been changed; b) additional matters related to oscillator using SAW or MEMS resonator in "Terms, definitions and general information" have been included; c) measurement methods of IEC 60679-1:2007 have been removed (they will be moved to IEC 62884 series); d) the content of Annex A has been extended; e) a new term and definition DIXO (Digital interfaced Crystal Oscillator) has been added; f) a new term and definition SSXO (Spread Spectrum Crystal Oscillator) has been added; g) Annex D has been added.

Piezoelektrische, dielektrische und elektrostatische Oszillatoren mit bewerteter Qualität - Teil 1: Fachgrundspezifikation

Oscillateurs piézoélectriques, diélectriques et électrostatiques sous assurance de la qualité - Partie 1: Spécification générique

L’IEC 60679-1:2017 spécifie les exigences générales relatives aux oscillateurs piézoélectriques, diélectriques et électrostatiques, y compris les oscillateurs à résonateur diélectrique (DRO - Dielectric Resonator Oscillators) et les oscillateurs à résonateurs à ondes acoustiques de volume à couches (FBAR) (ci-après dénommés "Oscillateur"), sous assurance qualité par les procédures d’agrément de savoir-faire ou les procédures d’homologation. NOTE Les oscillateurs DRO et FBAR sont à l’étude. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le titre a été modifié; b) des éléments supplémentaires relatifs aux oscillateurs utilisant un résonateur OAS ou MEMS ont été ajoutés dans "Termes, définitions et informations générales"; c) les méthodes de mesure de l’IEC 60679-1:2007 ont été supprimées (elles seront intégrées à la série IEC 62884); d) le contenu de l’Annexe A a été enrichi; e) un nouveau terme et sa définition, “DIXO” (digital interfaced crystal oscillator - oscillateur à quartz à interface numérique), ont été ajoutés; f) un nouveau terme et sa définition, “SSXO” (spread spectrum crystal oscillator - oscillateur à quartz à spectre étalé), ont été ajoutés; g) l’Annexe D a été ajoutée.

Piezoelektrični, dielektrični in elektrostatični oscilatorji ocenjene kakovosti - 1. del: Rodovna specifikacija (IEC 60679-1:2017)

Ta del standarda IEC 60679 določa splošne zahteve za piezoelektrične, dielektrične in elektrostatične oscilatorje ocenjene kakovosti, vključno z oscilatorji z dielektričnim resonatorjem (DRO) in oscilatorji, ki uporabljajo resonator FBAR (v nadaljevanju »oscilator«), ki vključujejo postopke za odobritev zmogljivosti ali kvalifikacije.
OPOMBA: Obravnavani so oscilatorji z dielektričnim resonatorjem (DRO) in oscilatorji, ki uporabljajo resonator FBAR.

General Information

Status
Published
Publication Date
16-Nov-2017
Withdrawal Date
29-Aug-2020
Current Stage
6060 - Document made available - Publishing
Start Date
17-Nov-2017
Completion Date
17-Nov-2017

Relations

Buy Standard

Standard
EN 60679-1:2018
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2018
1DGRPHãþD
SIST EN 60679-1:2008
3LH]RHOHNWULþQLGLHOHNWULþQLLQHOHNWURVWDWLþQLRVFLODWRUMLRFHQMHQHNDNRYRVWLGHO
5RGRYQDVSHFLILNDFLMD ,(&
Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic
specification (IEC 60679-1:2017)
Ta slovenski standard je istoveten z: EN 60679-1:2017
ICS:
31.140 3LH]RHOHNWULþQHQDSUDYH Piezoelectric devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60679-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2017
ICS 31.140 Supersedes EN 60679-1:2007
English Version
Piezoelectric, dielectric and electrostatic oscillators of assessed
quality - Part 1: Generic specification
(IEC 60679-1:2017)
Oscillateurs piézoélectriques, diélectriques et Piezoelektrische, dielektrische und elektrostatische
électrostatiques sous assurance de la qualité - Partie 1: Oszillatoren mit bewerteter Qualität - Teil 1:
Spécification générique Fachgrundspezifikation
(IEC 60679-1:2017) (IEC 60679-1:2017)
This European Standard was approved by CENELEC on 2017-08-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60679-1:2017 E
European foreword
The text of document 49/1229/FDIS, future edition 4 of IEC 60679-1, prepared by IEC/TC 49
"Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control,
selection and detection" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60679-1:2017.
The following dates are fixed:
(dop) 2018-05-30
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-08-30
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60679-1:2007.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60679-1:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60068-2-6 NOTE Harmonized as EN 60068-2-6.
IEC 60068-2-17 NOTE Harmonized as EN 60068-2-17.
IEC 60068-2-27 NOTE Harmonized as EN 60068-2-27.
IEC 60068-2-64 NOTE Harmonized as EN 60068-2-64.
IEC 60122-1:2002 NOTE Harmonized as EN 60122-1:2002 (not modified).
IEC 60679-3:2012 NOTE Harmonized as EN 60679-3:2013 (not modified).
IEC 60679-4 NOTE Harmonized as EN 60679-4.
IEC 60679-5 NOTE Harmonized as EN 60679-5.
IEC 61019-1:2004 NOTE Harmonized as EN 61019-1:2005 (not modified).
IEC 61019-2:2005 NOTE Harmonized as EN 61019-2:2005 (not modified).
IEC 61837-1:2012 NOTE Harmonized as EN 61837-1:2012 (not modified).
IEC 61837-2:2011 NOTE Harmonized as EN 61837-2:2011 (not modified).
IEC 61837-3:2015 NOTE Harmonized as EN 61837-3:2015 (not modified).
IEC 61837-4:2015 NOTE Harmonized as EN 61837-4:2015 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC TR 61000-4-1 -  Electromagnetic compatibility (EMC) - Part - -
4-1: Testing and measurement techniques -
Overview of the IEC 61000-4 series
IEC 60027 series Letter symbols to be used in electrical EN 60027 series
technology
IEC 60050-561 -  International electrotechnical vocabulary - - -
Part 561: Piezoelectric, dielectric and
electrostatic devices and associated
materials for frequency control, selection
and detection
IEC 60469 -  Transitions, pulses and related waveforms - EN 60469 -
Terms, definitions and algorithms
IEC 60617 -  Standard data element types with - -
associated classification scheme for electric
components - Part 4: IEC reference
collection for standard data element types
and component classes
IEC 60748-2 -  Semiconductor devices - Integrated circuits - -
Part 2: Digital integrated circuits
IEC 60749-26 -  Semiconductor devices - Mechanical and EN 60749-26 -
climatic test methods - Part 26: Electrostatic
discharge (ESD) sensitivity testing - Human
body model (HBM)
IEC 60749-27 -  Semiconductor devices - Mechanical and EN 60749-27 -
climatic test methods - Part 27: Electrostatic
discharge (ESD) sensitivity testing -
Machine model (MM)
IEC 61340-5-1 -  Electrostatics - Part 5-1: Protection of EN 61340-5-1 -
electronic devices from electrostatic
phenomena - General requirements
IEC 62884-1 2017 Measurement techniques of piezoelectric, EN 62884-1 2017
dielectric and electrostatic oscillators - Part
1: Basic methods for the measurement
ISO 80000-1 -  Quantities and units - Part 1: General EN ISO 80000-1 -

IEC 60679-1 ®
Edition 4.0 2017-07
INTERNATIONAL
STANDARD
Piezoelectric, dielectric and electrostatic oscillators of assessed quality –

Part 1: Generic specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.140 ISBN 978-2-8322-4608-5

– 2 – IEC 60679-1:2017 © IEC 2017
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and general information . 7
3.1 General . 7
3.2 Terms and definitions . 7
3.3 Preferred values for ratings and characteristics . 21
3.3.1 General . 21
3.3.2 Climatic category (40/85/56) . 22
3.3.3 Bump severity . 22
3.3.4 Vibration severity . 22
3.3.5 Shock severity . 22
3.3.6 Leak rate . 22
3.4 Marking . 23
3.4.1 General . 23
3.4.2 Packaging. 23
4 Quality assessment procedures . 23
4.1 General . 23
4.2 Primary stage of manufacture . 23
4.3 Structurally similar components . 23
4.4 Subcontracting . 23
4.5 Incorporated components . 24
4.6 Manufacturer’s approval . 24
4.7 Approval procedures . 24
4.7.1 General . 24
4.7.2 Capability approval . 24
4.7.3 Qualification approval . 24
4.8 Procedures for capability approval . 25
4.8.1 General . 25
4.8.2 Eligibility for capability approval . 25
4.8.3 Application for capability approval . 25
4.8.4 Granting of capability approval . 25
4.8.5 Capability manual . 25
4.9 Procedures for qualification approval . 25
4.9.1 General . 25
4.9.2 Eligibility for qualification approval . 25
4.9.3 Application for qualification approval . 25
4.9.4 Granting of qualification approval . 25
4.9.5 Quality conformance inspection . 26
4.10 Test procedures . 26
4.11 Screening requirements . 26
4.12 Rework and repair work . 26
4.12.1 Rework . 26
4.12.2 Repair work . 26
4.13 Certified test records. 26
4.14 Validity of release . 26
4.15 Release for delivery . 26

IEC 60679-1:2017 © IEC 2017 – 3 –
4.16 Unchecked parameters . 27
Annex A (normative) Load circuit for logic drive . 28
A.1 TTL and Schottky . 28
A.2 CMOS . 30
A.3 ECL . 30
A.4 LVDS . 31
Annex B (normative) Latch-up test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.