EN IEC 61058-2-1:2021

SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 61058-2-1:2011
Stikala za aparate - 2-1. del: Posebne zahteve za vrvična stikala (IEC 61058-2-
1:2018)
Switches for appliances - Part 2-1: Particular requirements for cord switches (IEC 61058-
2-1:2018)
Geräteschalter - Teil 2-1: Besondere Anforderungen an Schnurschalter (IEC 61058-2-
1:2018)
Interrupteurs pour appareils - Partie 2-1: Règles particulières pour les interrupteurs pour
câbles souples (IEC 61058-2-1:2018)
Ta slovenski standard je istoveten z: EN IEC 61058-2-1:2021
ICS:
29.120.40 Stikala Switches
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61058-2-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2021
ICS 29.120.40 Supersedes EN 61058-2-1:2011 and all of its
amendments and corrigenda (if any)
English Version
Switches for appliances - Part 2-1: Particular requirements for
cord switches
(IEC 61058-2-1:2018)
Interrupteurs pour appareils - Partie 2-1: Exigences Geräteschalter - Teil 2-1: Besondere Anforderungen an
particulières pour les interrupteurs pour câbles souples Schnurschalter
(IEC 61058-2-1:2018) (IEC 61058-2-1:2018)
This European Standard was approved by CENELEC on 2018-07-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61058-2-1:2021 E

European foreword
The text of document 23J/432/CDV, future edition 3 of IEC 61058-2-1, prepared by SC 23J "Switches
for appliances" of IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 61058-2-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-08-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-02-05
document have to be withdrawn
This document supersedes EN 61058-2-1:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61058-2-1:2018 was approved by CENELEC as a
European Standard without any modification.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V -
Part 1: General requirements
IEC 60227-5 -  Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V --
Part 5: Flexible cables (cords)
IEC 60245 series Rubber insulated cables - Rated voltages - -
up to and including 450/750 V -- Part 1:
General requirements
IEC 60335-2-17 -  Household and similar electrical appliances EN 60335-2-17 -
- Safety - Part 2-17: Particular
requirements for blankets, pads, clothing
and similar flexible heating appliances
IEC 61032 -  Protection of persons and equipment by EN 61032 -
enclosures - Probes for verification
IEC 61058-1 2016 Switches for appliances - Part 1: General EN IEC 61058-1 2018
requirements
IEC 61058-1-2 2016 Switches for appliances - Part 1-2: EN 61058-1-2 2016
Requirements for electronic switches
- -  +AC 2019
IEC 61058-2-1 ®
Edition 3.0 2018-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Switches for appliances –
Part 2-1: Particular requirements for cord switches

Interrupteurs pour appareils –

Partie 2-1: Exigences particulières pour les interrupteurs pour câbles souples

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.40 ISBN 978-2-8322-5812-5

– 2 – IEC 61058-2-1:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 General requirements . 6
5 General information on tests . 6
6 Rating. 6
7 Classification . 7
8 Marking and documentation . 8
9 Protection against electric shock . 8
10 Provision for earthing . 9
11 Terminals and terminations . 9
12 Construction . 9
13 Mechanism . 15
14 Protection against ingress of solid foreign objects, ingress of water and humid
conditions . 15
15 Insulation resistance and dielectric strength . 15
16 Heating . 15
17 Endurance . 15
18 Mechanical strength . 15
19 Screws, current-carrying parts and connections . 16
20 Clearances, creepage distances, solid insulation and coatings of rigid printed
board assemblies . 17
21 Fire hazard . 17
22 Resistance to rusting . 17
23 Abnormal operation and fault conditions for switches . 17
24 Components for electronic switches . 17
25 EMC requirements . 17
Annexes . 23

Figure 101 – Pull apparatus for testing the cord anchorage. 18
Figure 102 – Apparatus for flexing test . 19
Figure 103 – Tumbling barrel . 20
Figure 104 – Torque apparatus for testing the cord anchorage . 21
Figure 105 – Example of insulation system for a single-pole cord switch . 22

Table 3 – Switch information and loads placed in groups . 8
Table 4 – Resistive current carried by the terminal and related cross-sectional areas
of terminals for unprepared conductors . 9
Table 101 – Rated currents for resistor loads and related type of cords . 11
Table 102 – Size of conductor. 14
Table 103 – Torque values for insulating material screws . 17

IEC 61058-2-1:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SWITCHES FOR APPLIANCES –
Part 2-1: Particular requirements for cord switches

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
...