CLC IEC/TS 62443-1-5:2024

SLOVENSKI STANDARD
kSIST-TS CLC IEC/FprTS 62443-1-5:2024
01-april-2024
Zaščita industrijske avtomatizacije in nadzornih sistemov - 1-5. del: Shema za IEC
62443 varnostni profil (IEC/TS 62443-1-5:2023)
Security for industrial automation and control systems - Part 1-5: Scheme for IEC 62443
security profiles (IEC/TS 62443-1-5:2023)
IT-Sicherheit für industrielle Automatisierungssysteme - Teil 1-5: Schema für IEC 62443
IT-Sicherheitsprofile (IEC/TS 62443-1-5:2023)
Sécurité des automatismes industriels et des systèmes de commande - Partie 1-5:
Schéma pour les profils de sécurité IEC 62443 (IEC/TS 62443-1-5:2023)
Ta slovenski standard je istoveten z: CLC IEC/FprTS 62443-1-5:2024
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
kSIST-TS CLC IEC/FprTS 62443-1- en,fr,de
5:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

kSIST-TS CLC IEC/FprTS 62443-1-5:2024

kSIST-TS CLC IEC/FprTS 62443-1-5:2024

TECHNICAL SPECIFICATION FINAL DRAFT
CLC IEC/FprTS 62443-1-5
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2024
ICS 25.040.40 -
English Version
Security for industrial automation and control systems - Part 1-5:
Scheme for IEC 62443 security profiles
(IEC/TS 62443-1-5:2023)
Sécurité des automatismes industriels et des systèmes de IT-Sicherheit für industrielle Automatisierungssysteme - Teil
commande - Partie 1-5: Schéma pour les profils de sécurité 1-5: Schema für IEC 62443 IT-Sicherheitsprofile
IEC 62443 (IEC/TS 62443-1-5:2023)
(IEC/TS 62443-1-5:2023)
This draft Technical Specification is submitted to CENELEC members for vote by correspondence.
Deadline for CENELEC: 2024-05-03.

The text of this draft consists of the text of IEC/TS 62443-1-5:2023.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change without notice
and shall not be referred to a Technical Specification.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78839 Ref. No. CLC IEC/FprTS 62443-1-5:2024 E

kSIST-TS CLC IEC/FprTS 62443-1-5:2024
CLC IEC/FprTS 62443-1-5:2024 (E)
European foreword
This document (CLC IEC/FprTS 62443-1-5:2024) consists of the text of IEC/TS 62443-1-5:2023
prepared by IEC/TC 65 "Industrial-process measurement, control and automation".
This document is currently submitted to voting in accordance with the Internal Regulations, Part 2,
Subclause 11.3.3 for acceptance as a CENELEC Technical Specification.
The following date is proposed:
• latest date by which the existence of (doa) dor + 6 months
this document has to be announced at
national level
kSIST-TS CLC IEC/FprTS 62443-1-5:2024

IEC TS 62443-1-5 ®
Edition 1.0 2023-09
TECHNICAL
SPECIFICATION
Security for industrial automation and control systems –

Part 1-5: Scheme for IEC 62443 security profiles

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40  ISBN 978-2-8322-7499-6

kSIST-TS CLC IEC/FprTS 62443-1-5:2024
– 2 – IEC TS 62443-1-5:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviated terms, and acronyms . 7
3.1 Terms and definitions. 7
3.2 Abbreviated terms and acronyms . 9
4 Security profile . 9
5 Security profile requirements . 10
5.1 General . 10
5.2 PR.01: Security profile content . 11
5.2.1 Requirement . 11
5.2.2 Rationale and supplemental guidance . 11
5.3 PR.02: Selection . 11
5.3.1 Requirement . 11
5.3.2 Rationale and supplemental guidance . 11
5.4 PR.03: Contextual mapping . 11
5.4.1 Requirement . 11
5.4.2 Rationale and supplemental guidance . 12
5.5 PR.04: No new requirements . 12
5.5.1 Requirement . 12
5.5.2 Rationale and supplemental guidance . 12
5.6 PR.05: No modification of IEC 62443 requirements . 12
5.6.1 Requirement . 12
5.6.2 Rationale and supplemental guidance . 12
5.7 PR.06: Maturity level . 12
5.7.1 Requirement . 12
5.7.2 Rationale and supplemental guidance . 13
5.8 PR.07: Security level . 13
5.8.1 Requirement . 13
5.8.2 Rationale and supplemental guidance . 13
5.9 PR.08: Security risk evaluation of the security profile . 13
5.9.1 Requirement . 13
5.9.2 Rationale and supplemental guidance . 13
5.10 PR.09: Document type . 13
5.10.1 Requirement . 13
5.10.2 Rationale and supplemental guidance . 14
6 Process for the creation, validation, and application of IEC 62443 security profiles . 14
6.1 General . 14
6.2 Creation phase . 14
6.3 Validation phase . 14
6.4 Application phase . 14
Annex A (normative) IEC 62443 security profile content . 15
Bibliography . 16

kSIST-TS CLC IEC/FprTS 62443-1-5:2024
IEC TS 62443-1-5:2023 © IEC 2023 – 3 –
Figure 1 – Relationship between standards and security profiles within the IEC 62443
series . 10
Figure 2 – Relations between security profile requirements . 10

Table A.1 – Minimum IEC 62443 security profile content . 15

kSIST-TS CLC IEC/FprTS 62443-1-5:2024
– 4 – IEC TS 62443-1-5:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECURITY FOR INDUSTRIAL AUTOMATION
AND CONTROL SYSTEMS –
Part 1-5: Scheme for IEC 62443 security profiles

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC TS 62443-1-5 has been prepared by IEC technical committee 65: Industrial-process
measurement, control and automation. It is a Technical Specification.
The text of this Technical Specification is based on the following documents:
Draft Report on voting
65/947/DTS 65/1009/RVDTS
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Technical Specification is English.

kSIST-TS CLC IEC/FprTS 62443-1-5:2024
IEC TS 62443-1-5:2023 © IEC 2023 – 5 –
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts in the IEC 62443 series, published und
...