EN 60519-10:2013

SLOVENSKI STANDARD
01-julij-2013
1DGRPHãþD
SIST EN 60519-10:2005
9DUQRVWSULHOHNWULþQLKJUHOQLKLQãWDODFLMDKGHO3RVHEQH]DKWHYH]D
LQGXVWULMVNHLQNRPHUFLDOQHVLVWHPH]DXSRURYQRJUHWMH
Safety in electroheat installations - Part 10: Particular requirements for electrical
resistance trace heating systems for industrial and commercial applications
Sicherheit in Elektrowärmeanlagen - Teil 10: Besondere Anforderungen an elektrische
Trace-Widerstandsheizungen für industrielle und gewerbliche Zwecke
Sécurité dans les installations électrothermiques - Partie 10: Règles particulières pour
les systèmes de chauffage par traçage à résistance électrique pour applications
industrielles et commerciales
Ta slovenski standard je istoveten z: EN 60519-10:2013
ICS:
25.180.10 (OHNWULþQHSHþL Electric furnaces
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60519-10
NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM
ICS 25.180.10 Supersedes EN 60519-10:2005

English version
Safety in electroheating installations -
Part 10: Particular requirements for electrical resistance trace heating
systems for industrial and commercial applications
(IEC 60519-10:2013)
Sécurité dans les installations Sicherheit in Elektrowärmeanlagen -
électrothermiques - Teil 10: Besondere Anforderungen an
Partie 10: Règles particulières pour les elektrische Trace-Widerstandsheizungen
systèmes de chauffage par traçage à für industrielle und gewerbliche Zwecke
résistance électrique pour applications (IEC 60519-10:2013)
industrielles et commerciales
(CEI 60519-10:2013)
This European Standard was approved by CENELEC on 2013-03-29. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60519-10:2013 E
Foreword
The text of document 27/853/CDV, future edition 2 of IEC 60519-10, prepared by IEC TC 27 "Industrial
electroheating and electromagnetic processing" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60519-10:2013.

The following dates are fixed:
• latest date by which the document has (dop) 2013-12-29
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-03-29
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60519-10:2005.
− the structure has been amended and adjusted to EN 60519-1:2011;
− references to EN 62395-1 and EN 62395-2 have been completed.
The clauses of parts of the EN 60519 series (hereinafter called Particular requirements) supplement or
modify the corresponding clauses of EN 60519-1:2011 (General requirements hereinafter called Part 1).
This part of EN 60519 is to be read in conjunction with Part 1. It supplements or modifies the
corresponding clauses of Part 1. Where the text indicates an "addition" to or a "replacement" of the
relevant provision of Part 1, these changes are made to the relevant text of Part 1. Where no change is
necessary, the words "This clause of Part 1 is applicable" are used. When a particular subclause of Part 1
is not mentioned in this part, that subclause applies as far as is reasonable.
Additional specific provisions to those in Part 1, given as individual clauses or subclauses, are numbered
starting from 101.
NOTE  The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced
clause or subclause;
– additional annexes are lettered AA, BB, etc.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 60519-10:2013 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 60519-10:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Addition to Annex ZA of EN 60519-1:2011:

Publication Year Title EN/HD Year

IEC 60519-1 2010 Safety in electroheating installations - EN 60519-1 2011
+ corr. November 2012 Part 1: General requirements

1) 1)
IEC 62395-1 201X Electrical resistance trace heating systems EN 62395-1 201X
for industrial and commercial applications -
Part 1: General and testing requirements

1) 1)
IEC 62395-2 201X Electrical resistance trace heating systems EN 62395-2 201X
for industrial and commercial applications -
Part 2: Application guide for system design,
installation and maintenance
1)
To be published.
IEC 60519-10 ®
Edition 2.0 2013-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Safety in electroheating installations –

Part 10: Particular requirements for electrical resistance trace heating systems

for industrial and commercial applications

Sécurité dans les installations électrothermiques –

Partie 10: Exigences particulières pour les systèmes de chauffage par traçage à

résistance électrique pour applications industrielles et commerciales

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 25.180.10 ISBN 978-2-83220-672-0

– 2 – 60519-10 © IEC:2013
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope and object . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Classification of electroheating equipment . 9
5 General requirements . 9
6 Isolation and switching . 10
7 Connection to the electrical supply network and internal connections . 11
8 Protection against electric shock . 11
9 Equipotential bonding. 11
10 Control circuits and control functions . 11
11 Protection against thermal influences . 12
12 Protection against other hazards . 12
13 Marking, labelling and technical documentation . 12
14 Commissioning, inspection, operation and maintenance . 13
Annex A (normative) Protection against electric shock – special measures . 16
Bibliography . 17

60519-10 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SAFETY IN ELECTROHEATING INSTALLATIONS –

Part 10: Particular requirements for electrical resistance trace
heating systems for industrial and commercial applications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60519-10 has been prepared by IEC technical committee 27:
Industrial electroheating and electromagnetic processing.
This second edition cancels and replaces the first edition published in 2005. This edition
constitutes a technical revision.
This edition includes the following significant techni
...