EN 62952-2:2016

SLOVENSKI STANDARD
01-september-2017
9LULQDSDMDQMDEUH]åLþQHNRPXQLNDFLMVNHQDSUDYHGHO3URILO]DQDSDMDOQH
PRGXOH]EDWHULMDPL,(&
Power sources for a wireless communication device - Part 2: Profile for power modules
with batteries (IEC 62952-2:2016)
Energiequellen für ein Funkkommunikationsgerät - Teil 2: Profil für Energiemodule mit
Batterien (IEC 62952-2:2016)
Sources d'énergie pour un appareil de communication sans fil - Partie 2: Profil des
modules d'alimentation à batteries (IEC 62952-2:2016)
Ta slovenski standard je istoveten z: EN 62952-2:2016
ICS:
29.220.10 3ULPDUQLþOHQLLQEDWHULMH Primary cells and batteries
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62952-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2016
ICS 33.040.40; 29.220.10
English Version
Power sources for a wireless communication device - Part 2:
Profile for power modules with batteries
(IEC 62952-2:2016)
Sources d'énergie pour un appareil de communication sans Energiequellen für ein Funkkommunikationsgerät - Teil 2:
fil - Partie 2: Profil des modules d'alimentation à batteries Profil für Energiemodule mit Batterien
(IEC 62952-2:2016) (IEC 62952-2:2016)
This European Standard was approved by CENELEC on 2016-11-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62952-2:2016 E
European foreword
The text of document 65B/1054/FDIS, future edition 1 of IEC 62952-2, prepared by SC 65B
“Measurement and control devices” of IEC/TC 65 “Industrial process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-08-09
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-11-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62952-2:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60086-1:2015 NOTE Harmonized as EN 60086-1:2015.
IEC 60086-1:2015 NOTE Harmonized as EN 60086-1:2016.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62952-1 2016 Power sources for a wireless - -
communication device - Part 1: General
requirements of power modules
IEC 62952-2 ®
Edition 1.0 2016-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Power sources for a wireless communication device –

Part 2: Profile for power modules with batteries

Sources d'énergie pour un appareil de communication sans fil –

Partie 2: Profil des modules d'alimentation à batteries

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.10; 33.040.40 ISBN 978-2-8322-3639-0

– 2 – IEC 62952-2:2016  IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms, definitions, abbreviated terms, acronyms and conventions . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms and acronyms . 6
3.3 Convention for profiles . 6
4 Profile for power modules with batteries . 7
Bibliography . 9

Table 1 – Layout of profile (sub)clause selection tables . 6
Table 2 – Contents of (sub)clause selection tables . 7
Table 3 – General power module profile selection . 8

IEC 62952-2:2016  IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE –

Part 2: Profile for power modules with batteries

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to
...