EN 55032:2015/A11:2020
(Amendment)Electromagnetic compatibility of multimedia equipment - Emission Requirements
Electromagnetic compatibility of multimedia equipment - Emission Requirements
2020-12-01: no xml because common mod
2019-10-29: D164/C050: Amendment to add Annex ZZ to EN 55032:2015 & enable citation in OJEU
2021: CLC legacy converted by DCLab NISOSTS
Elektromagnetische Verträglichkeit von Multimediageräten und -einrichtungen - Anforderungen an die Störaussendung
Compatibilité électromagnétique des équipements multimédia - Exigences d'émission
Elektromagnetna združljivost večpredstavnostne opreme - Zahteve glede elektromagnetnega sevanja - Dopolnilo A11
General Information
- Status
- Published
- Publication Date
- 05-Mar-2020
- Withdrawal Date
- 26-Nov-2022
- Technical Committee
- CLC/TC 210 - Electromagnetic Compatibility (EMC)
- Drafting Committee
- CLC/TC 210 - Electromagnetic Compatibility (EMC)
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 06-Mar-2020
- Completion Date
- 06-Mar-2020
Relations
- Effective Date
- 07-Jun-2022
- Revised
prEN IEC 55032:2025 - Electromagnetic compatibility of multimedia equipment - Emission requirements - Effective Date
- 20-Feb-2024
Overview
EN 55032:2015/A11:2020 is an amendment to the European standard EN 55032:2015 covering the electromagnetic compatibility (EMC) emission requirements for multimedia equipment. Prepared by CLC/TC 210 and approved by CENELEC on 2019-11-27, Amendment A11 was published in March 2020 and updates the normative framework to support harmonised conformity assessment and citation in the Official Journal of the European Union (OJEU).
This amendment clarifies the relationship between the standard and EU regulatory requirements (notably Directive 2014/30/EU) by replacing Annex ZZ. It provides manufacturers, test laboratories and conformity assessors with guidance on how compliance with EN 55032 clauses can provide a presumption of conformity with essential requirements of the EMC Directive within the standard's scope.
Key Topics
- Scope and purpose: Emission requirements for multimedia and teleconferencing equipment to limit electromagnetic disturbance.
- Amendment A11: Introduces a revised Annex ZZ to document the standard’s coverage of essential requirements of Directive 2014/30/EU and to facilitate citation in the OJEU.
- Regulatory linkage: Explains how compliance with normative clauses maps to Essential Requirements in Directive 2014/30/EU and associated EFTA regulations.
- Implementation dates: The amendment sets dates for national implementation and withdrawal of conflicting national standards as specified in the foreword.
- Referenced guidance: Where applicable, measurement uncertainty guidance and applicability to series production are discussed; CISPR TR 16-4-3 is cited for production applicability guidance.
Applications
This amendment is directly useful for:
- Manufacturers designing multimedia devices who need to demonstrate EMC emission compliance for CE marking and EU market access.
- Test laboratories performing emissions testing to current European normative references.
- Regulatory and compliance teams aligning technical documentation and declarations of conformity with Directive 2014/30/EU.
- Product managers and engineers needing a harmonised standard to reduce market entry risk across CENELEC member countries.
Benefits include clearer mapping to EU essential requirements, improved legal certainty when the standard is cited in the OJEU, and harmonised testing expectations for manufacturers across Europe.
Related Standards
- EN 55032:2015 (base standard amended by A11)
- CISPR TR 16-4-3 (referenced for guidance on measurement uncertainty and series production applicability)
- Directive 2014/30/EU (electromagnetic compatibility directive; Annex ZZ maps essential requirements)
For organisations involved in multimedia equipment design, testing or regulatory compliance, EN 55032:2015/A11:2020 is a primary normative reference to support EMC emission conformity and streamline access to the EU market.
Frequently Asked Questions
EN 55032:2015/A11:2020 is a amendment published by CLC. Its full title is "Electromagnetic compatibility of multimedia equipment - Emission Requirements". This standard covers: 2020-12-01: no xml because common mod 2019-10-29: D164/C050: Amendment to add Annex ZZ to EN 55032:2015 & enable citation in OJEU 2021: CLC legacy converted by DCLab NISOSTS
2020-12-01: no xml because common mod 2019-10-29: D164/C050: Amendment to add Annex ZZ to EN 55032:2015 & enable citation in OJEU 2021: CLC legacy converted by DCLab NISOSTS
EN 55032:2015/A11:2020 is classified under the following ICS (International Classification for Standards) categories: 33.100.10 - Emission. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 55032:2015/A11:2020 has the following relationships with other standards: It is inter standard links to EN 55032:2015, prEN IEC 55032:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 55032:2015/A11:2020 is associated with the following European legislation: EU Directives/Regulations: 2014/30/EU, 2014/53/EU; Standardization Mandates: M/536, M/552. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 55032:2015/A11:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2020
Elektromagnetna združljivost večpredstavnostne opreme - Zahteve glede
elektromagnetnega sevanja - Dopolnilo A11
Electromagnetic compatibility of multimedia equipment - Emission Requirements
Elektromagnetische Verträglichkeit von Multimediageräten und -einrichtungen -
Anforderungen an die Störaussendung
Compatibilité électromagnétique des équipements multimédia - Exigences d'émission
Ta slovenski standard je istoveten z: EN 55032:2015/A11:2020
ICS:
33.100.10 Emisija Emission
33.160.60 Večpredstavni (multimedijski) Multimedia systems and
sistemi in oprema za teleconferencing equipment
telekonference
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 55032:2015/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2020
ICS 33.100.10
English Version
Electromagnetic compatibility of multimedia equipment -
Emission Requirements
Compatibilité électromagnétique des équipements Elektromagnetische Verträglichkeit von Multimediageräten
multimédia - Exigences d'émission und -einrichtungen - Anforderungen an die Störaussendung
This amendment A11 modifies the European Standard EN 55032:2015; it was approved by CENELEC on 2019-11-27. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 55032:2015/A11:2020 E
European foreword
This document (EN 55032:2015/A11:2020) has been prepared by CLC/TC 210 "Electromagnetic
Compatibility (EMC)".
The following dates are fixed:
• latest date by which this document has (dop) 2020-11-27
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2022-11-27
standards conflicting with this document
have to be withdrawn
This document amends EN 55032
...
The article discusses the standard EN 55032:2015/A11:2020, which pertains to the electromagnetic compatibility of multimedia equipment and emission requirements. It also mentions an amendment that was made in 2019 to add Annex ZZ to the standard and enable citation in the Official Journal of the European Union. Additionally, it mentions that the CLC legacy was converted by DCLab NISOSTS in 2021.
기사 제목: EN 55032:2015/A11:2020 - 멀티미디어 장비의 전자파적합성 - 방사 요구 사항 기사 내용: 2020-12-01: 공통 모드가 없어서 xml 없음 2019-10-29: EN 55032:2015에 첨부 ZZ 부록을 추가하고 OJEU에서 인용 가능하도록 변경하는 개정안인 D164/C050 2021: CLC 레거시가 DCLab NISOSTS에 의해 변환됨 이 기사는 멀티미디어 장비의 전자파적합성과 방사 요구 사항에 관한 표준인 EN 55032:2015/A11:2020에 대해 다루고 있습니다. 또한, 2019년에 EN 55032:2015에 대한 개정안으로 ZZ 부록을 추가하고, 유럽연합 공식 저널에서 인용할 수 있도록 변경했다는 내용을 언급하고 있습니다. 또한, 2021년에는 CLC 레거시가 DCLab NISOSTS에 의해 변환되었다고 언급하고 있습니다.
記事タイトル：EN 55032:2015/A11:2020-マルチメディア機器の電磁両立性-放射要件 記事の内容：2020-12-01：共通モードなしのためXMLなし 2019-10-29：EN 55032:2015にZZ付録を追加し、OJEUでの引用を可能にするための改定D164/C050 2021年：CLCレガシーをDCLab NISOSTSが変換した この記事は、マルチメディア機器の電磁両立性と放射要件に関するEN 55032:2015/A11:2020の標準について説明しています。また、2019年にはEN 55032:2015にZZ付録を追加し、ヨーロッパ連合公式ジャーナルでの引用が可能になる改定が行われました。さらに、2021年にはCLCレガシーがDCLab NISOSTSによって変換されました。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...