EN IEC 62443-4-2:2019

SLOVENSKI STANDARD
01-november-2019
Zaščita za sisteme industrijske avtomatizacije in nadzornih sistemov - 4-2. del:
Zahteve za tehnično varnost zaščito za IACS komponente (IEC 62443-4-2:2019)
Security for industrial automation and control systems - Part 4-2: Technical security
requirements for IACS components (IEC 62443-4-2:2019)
Industrielle Kommunikationsnetze – IT-Sicherheit für industrielle
Automatisierungssysteme – Teil 4-2: Anforderungen an Komponenten industrieller
Automatisierungssysteme (IEC 62443-4-2:2019)
Sécurité des systèmes d’automatisation et de commande industrielles - Partie 4-2:
Exigences de sécurité technique des composants IACS (IEC 62443-4-2:2019)
Ta slovenski standard je istoveten z: EN IEC 62443-4-2:2019
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
35.030 Informacijska varnost IT Security
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62443-4-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2019
ICS 25.040.40; 35.030
English Version
Security for industrial automation and control systems - Part 4-2:
Technical security requirements for IACS components
(IEC 62443-4-2:2019)
Industrielle Kommunikationsnetze – IT-Sicherheit für Sécurité des systèmes d'automatisation et de commande
industrielle Automatisierungssysteme – Teil 4-2: industrielles - Partie 4-2: Exigences de sécurité technique
Anforderungen an Komponenten industrieller des composants IACS
Automatisierungssysteme (IEC 62443-4-2:2019)
(IEC 62443-4-2:2019)
This European Standard was approved by CENELEC on 2019-04-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62443-4-2:2019 E

European foreword
The text of document 65/735/FDIS, future edition 1 of IEC 62443-4-2, prepared by IEC/TC 65
"Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62443-4-2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-01-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-04-03
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62443-4-2:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
ISO/IEC 27002:2013 NOTE Harmonized as EN ISO/IEC 27002:2017 (not modified)
IEC 62264-1 NOTE Harmonized as EN 62264-1
IEC 62443-3-2 NOTE Harmonized as EN 62443-3-2

Under preparation. Stage at time of publication: prEN 62443-3-2:2018.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC/TS 62443-1-1 -  Industrial communication networks - - -
Network and system security - Part 1-1:
Terminology, concepts and models
IEC 62443-3-3 2013 Industrial communication networks - - -
Network and system security - Part 3-3:
System security requirements and security
levels
Security for industrial automation and
IEC 62443-4-1 -  EN IEC 62443-4-1 -
control systems – Part 4-1: Secure product
development lifecycle requirements

IEC 62443-4-2 ®
Edition 1.0 2019-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Security for industrial automation and control systems –

Part 4-2: Technical security requirements for IACS components

Sécurité des systèmes d’automatisation et de commande industrielles –

Partie 4-2: Exigences de sécurité technique des composants IACS

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.030 ISBN 978-2-8322-6597-0

– 2 – IEC 62443-4-2:2019  IEC 2019
CONTENTS
FOREWORD . 12
INTRODUCTION . 14
1 Scope . 17
2 Normative references . 17
3 Terms, definitions, abbreviated terms, acronyms, and conventions . 18
3.1 Terms and definitions . 18
3.2 Abbreviated terms and acronyms . 24
3.3 Conventions . 26
4 Common component security constraints . 27
4.1 Overview. 27
4.2 CCSC 1: Support of essential functions . 27
4.3 CCSC 2: Compensating countermeasures . 27
4.4 CCSC 3: Least privilege . 27
4.5 CCSC 4: Software development process . 27
5 FR 1 – Identification and authentication control . 27
5.1 Purpose and SL-C(IAC) descriptions . 27
5.2 Rationale . 28
5.3 CR 1.1 – Human user identification and authentication . 28
5.3.1 Requirement . 28
5.3.2 Rationale and supplemental guidance. 28
5.3.3 Requirement enhancements . 28
5.3.4 Security levels . 29
5.4 CR 1.2 – Software process and device identification and authentication . 29
5.4.1 Requirement . 29
5.4.2 Rationale and supplemental guidance. 29
5.4.3 Requirement enhancements . 29
5.4.4 Security levels . 30
5.5 CR 1.3 – Account management . 30
5.5.1 Requirement . 30
5.5.2 Rationale and supplemental guidance. 30
5.5.3 Requirement enhancements . 30
5.5.4 Security levels . 30
5.6 CR 1.4 – Identifier management . 30
5.6.1 Requirement . 30
5.6.2 Rationale and supplemental guidance. 30
5.6.3 Requirement enhancements . 31
5.6.4 Security levels . 31
5.7 CR 1.5 – Authenticator management . 31
5.7.1 Requirement . 31
5.7.2 Rationale and supplemental guidance. 31
5.7.3 Requirement enhancements . 32
5.7.4 Security levels . 32
5.8 CR 1.6 – Wireless access management . 32

IEC 62443-4-2:2019  IEC 2019 – 3 –
5.9 CR 1.7 – Strength of password-based authentication . 32
5.9.1 Requirement . 32
5.9.2 Rationale and supplemental guidance. 32
5.9.3 Requirement enhancements . 32
5.9.4 Security levels . 33
5.10 CR 1.8 – Public key infrastructure certificates . 33
5.10.1 Requirement . 33
5.10.2 Rationale and supplemental guidance. 33
5.10.3 Requirement enhancements . 33
5.10.4 Security levels . 33
5.11 CR 1.9 – Strength of public key-based authentication . 34
5.11.1 Requirement . 34
5.11.2 Rationale and supplemental guidance. 34
5.11.3 Requirement enhancements . 35
5.11.4 Security levels . 35
5.12 CR 1.10 – Authenticator feedback . 35
5.12.1 Requirement . 35
5.12.2 Rationale and supplemental guidance. 35
5.12.3 Requirement enhancements . 35
5.12.4 Security levels . 35
5.13 CR 1.11 – Unsuccessful login attempts .
...