EN 62193:2003

SLOVENSKI STANDARD
01-februar-2004
Delo pod napetostjo - Teleskopske palice in teleskopske merilne palice (IEC
62193:2003)
Live working - Telescopic sticks and telescopic measuring sticks
Arbeiten unter Spannung - Teleskopische Stangen und teleskopische Messstangen
Travaux sous tension - Perches télescopiques et perches de mesure téléscopiques
Ta slovenski standard je istoveten z: EN 62193:2003
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62193
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003

ICS 13.260; 29.240.20; 29.260.99

English version
Live working -
Telescopic sticks and telescopic measuring sticks
(IEC 62193:2003)
Travaux sous tension -  Arbeiten unter Spannung -
Perches télescopiques Teleskopische Stangen
et perches de mesure téléscopiques und teleskopische Messstangen
(CEI 62193:2003) (IEC 62193:2003)

This European Standard was approved by CENELEC on 2003-09-23. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62193:2003 E
Foreword
The text of document 78/513/FDIS, future edition 1 of IEC 62193, prepared by IEC TC 78, Live working,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62193 on
2003-09-23.
The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes B, C, D, E and ZA are normative and annexes A and F are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62193:2003 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60743 NOTE Harmonized as EN 60743:2001 (not modified).
IEC 61472 NOTE Harmonized as EN 61472:1995 (modified).
IEC 61477 + A1 NOTE Harmonized as EN 61477:2002 + A1:2002 (not modified).
__________
- 3 - EN 62193:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60060-1 1989 High-voltage test techniques HD 588.1 S1 1991
+ corr. March 1990 Part 1: General definitions and test
requirements
1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance
IEC 60068-2-18 2000 Part 2-18: Tests - Tests R and EN 60068-2-18 2001
guidance: Water
IEC 60417 2002 Graphical symbols for use on equipment- -
database
IEC 60832 (mod) 1988 Insulating poles (insulating sticks) and EN 60832 1996
universal tool attachments (fittings) for
live working
IEC 60855 (mod) 1985 Insulating foam-filled tubes and solid EN 60855 1996
rods for live working
IEC 61235 (mod) 1993 Live working - Insulating hollow tubes EN 61235 1995
for electrical purposes
2)
IEC 61318 - Live working - Quality assurance plans - -
applicable to tools, devices and
equipment
1)
EN 60068-1 includes corrigendum October 1988 + A1:1992 to IEC 60068-1.
2)
To be published.
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Première édition
STANDARD
First edition
2003-05
Travaux sous tension –
Perches téléscopiques et
perches de mesure téléscopiques
Live working –
Telescopic sticks and
telescopic measuring sticks
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
U
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

62193  IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .7
1 Scope . 9
2 Normative references. 9
3 Terms and definitions.11
4 Classification .15
5 Requirements .15
5.1 Safety.15
5.2 General .15
5.3 Requirements for the lock assembly and end caps.17
5.4 Surface finish .17
5.5 Dimensional requirements .17
5.6 Marking .17
5.7 Instructions for use .19
6 Type testing.19
6.1 General .19
6.2 Visual inspection and dimensional check .21
6.3 Durability of markings .21
6.4 Dielectric tests.21
6.5 Mechanical tests.23
7 Quality assurance plan .27
8 Modifications .27
Annex A (informative) Selection of the length of the tip section of the tool.37
Annex B (normative) Suitable for live working; double triangle (IEC-60417-5216:2002-10) .39
Annex C (normative) Chronology of tests .41
Annex D (normative) Quality assurance plan.43
Annex E (normative) Acceptance tests .47
Annex F (informative) In-service recommendations .49
Bibliography.59
Figure 1 – Test for surface hydrophobic properties – visual observation (see 6.4.1.1) .29
Figure 2 – Surface dielectric test (see 6.4.2) .31
Figure 3 – Bending test (see 6.5.1) .33
Figure 4 – Free fall impact test (see 6.5.2) .33
Figure 5 – Tension test (see 6.5.3).35
Figure 6 – Torsion test (see 6.5.4) .35
Figure F.1 – Typical set-up for high-voltage tests .57
Table C.1 – Sequence of tests .41
Table D.1 – Classification of defects .45

62193  IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LIVE WORKING –
TELESCOPIC STICKS AND
TELESCOPIC MEASURING STICKS
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62193 has been prepared by IEC technical committee 78: Live
working.
The text of this standard is based on the following documents:
FDIS Report on voting
78/513/FDIS 78/523/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until 2010.
At this date, the publication wi
...