EN 61076-2:2011

SLOVENSKI STANDARD
01-oktober-2011
.RQHNWRUML]DHOHNWURQVNRRSUHPR=DKWHYH]DL]GHOHNGHO3RGURþQD
VSHFLILNDFLMD]DRNURJOHNRQHNWRUMH
Connectors for electronic equipment - Product requirements - Part 2: Sectional
specification for circular connectors
Steckverbinder für elektronische Einrichtungen - Produktanforderungen -- Teil 2:
Rahmenspezifikation für Rundsteckverbinder
Connecteurs pour équipements électroniques - Exigences de produit - Partie 2:
Spécification intermédiaire pour les connecteurs circulaires
Ta slovenski standard je istoveten z: EN 61076-2:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61076-2
NORME EUROPÉENNE
July 2011
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 61076-2:1999

English version
Connectors for electronic equipment -
Product requirements -
Part 2: Sectional specification for circular connectors
(IEC 61076-2:2011)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produit - Produktanforderungen -
Partie 2: Spécification intermédiaire pour Teil 2: Rahmenspezifikation für
les connecteurs circulaires Rundsteckverbinder
(CEI 61076-2:2011) (IEC 61076-2:2011)

This European Standard was approved by CENELEC on 2011-07-26. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-2:2011 E
Foreword
The text of document (48B/2240/FDIS), future edition 2 of IEC 61076-2, prepared by SC 48B, Connectors,
of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-2 on
2011-07-26.
This European Standard supersedes EN 61076-2:1999.
a) This European Standard no longer includes the quality assessment procedures. As described in
EN 61076-1 and EN 62197-1, a new document structure has been established. EN 61076-2 has been
revised to reflect this updated structure.
b) Subclause 3.2, Systems of levels has been introduced.
c) The subclause on EN type designation has been removed.
d) Clauses 4 Dimensional information and 5 Characteristics have been added.
e) Some clauses and test groups have been rearranged. Test group HP has been added.
This standard is to be used in conjunction with EN 61076-1 and EN 62197-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-04-26
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-07-26
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-2:2011 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61076-2:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-1 - Environmental testing - EN 60068-1 -
Part 1: General and guidance
IEC 60352 Series Solderless connections EN 60352 Series

IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
IEC 60512-1-100 - Connectors for electronic equipment - Tests EN 60512-1-100 -
and measurements -
Part 1-100: General - Applicable publications

IEC 61076-1 2006 Connectors for electronic equipment - EN 61076-1 2006
Product requirements -
Part 1: Generic specification
IEC 61076-2-001 - Connectors for electronic equipment - EN 61076-2-001 -
Product requirements -
Part 2-001: Circular connectors - Blank detail
specification
IEC 62197-1 - Connectors for electronic equipment - Quality EN 62197-1 -
assessment requirements -
Part 1: Generic specification
IEC 61076-2 ®
Edition 2.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Product requirements –
Part 2: Sectional specification for circular connectors

Connecteurs pour équipements électroniques – Exigences de produit –
Partie 2: Spécification intermédiaire pour les connecteurs circulaires

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 31.220.10 ISBN 978-2-88912-565-4

– 2 – 61076-2  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Technical information . 5
3.1 Terms and definitions . 5
3.2 System of levels . 6
3.2.1 Performance levels . 6
3.2.2 Compatibility levels, according to IEC 61076-1 . 6
3.3 Classification into climatic categories . 6
3.4 Creepage and clearance distances . 6
3.5 Current-carrying capacity . 6
3.6 Marking . 6
4 Dimensional information . 6
5 Characteristics . 7
6 Tests and test schedules . 7
6.1 General aspects . 7
6.2 Test schedules . 7
6.2.1 General . 7
6.2.2 Basic (minimum) test schedule . 8
6.2.3 Full test schedule . 8
6.3 Test procedures and measuring methods . 18
6.4 Pre-conditioning . 18
6.5 Wiring and mounting of specimens . 18
6.5.1 Wiring . 18
6.5.2 Mounting . 18
7 Blank detail product specification – General . 18

Table 1 – Basic tests (minimum) . 8
Table 2 – Test group P . 9
Table 3 – Test group AP . 10
Table 4 – Test group BP . 12
Table 5 – Test group CP . 13
Table 6 – Test group DP . 14
Table 7 – Test group EP . 15
Table 8 – Test group FP . 15
Table 9 – Test group GP . 16
Table 10 – Test group HP . 16
Table 11 – Test group KP . 17
Table 12 – Test group LP . 17

61076-2  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
PRODUCT REQUIREMENTS –
Part 2: Sectional specification for circular connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its tec
...