EN 60269-4:1996
(Main)Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
For application in equipment containing semiconductor devices for circuits up to 1000 V a.c. to circuits of nominal voltages up to 1500 V d.c. Establishes characteristics of semiconductor fuse-links in such a way that they can be replaced by other fuse-links having the same characteristics provided their dimensions are identical. Defines standard conditions for operation in service, characteristics of fuses, markings, standard conditions for construction and tests. Appendix A provides a guide for the coordination of fuse-links with semiconductor devices. Note: - To be read in conjunction with EN 60269-1.
Niederspannungssicherungen - Teil 4: Zusätzliche Anforderungen an Sicherungseinsätze zum Schutz von Halbleiter-Bauelementen
Fusibles basse tension - Partie 4: Prescriptions supplémentaires concernant les éléments de remplacement utilisés pour la protection des dispositifs à semi-conducteurs
Pour utilisation associée à des matériels comportant des dispositifs à semiconducteurs utilisés dans des circuits de tension nominale inférieure ou égale à 1 000 V en courant alternatif ou 1 500 V en courant continu. Précise les caractéristiques des éléments de remplacement pour les semiconducteurs de manière à permettre leur remplacement par d'autres éléments de remplacement ayant les mêmes caractéristiques, à condition que leurs dimensions soient identiques. Définit les conditions normales de fonctionnement en service, les caractéristiques des fusibles coupe-circuit, les indications qu'ils doivent porter, les conditions normales d'établissement et les essais applicables. L'annexe A est un guide de coordination entre les éléments de remplacement et les dispositifs à semiconducteurs. Note: Doit être utilisée avec la EN 60269-1.
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC 60269-4:1986)
General Information
- Status
- Withdrawn
- Publication Date
- 22-Aug-1996
- Withdrawal Date
- 31-May-1997
- Technical Committee
- CLC/SR 32B - Low-voltage fuses
- Drafting Committee
- IEC/SC 32B - IEC_SC_32B
- Parallel Committee
- IEC/SC 32B - IEC_SC_32B
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Mar-2010
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 29-Jan-2023
- Effective Date
- 29-Jan-2023
- Effective Date
- 29-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60269-4:1996 is a standard published by CLC. Its full title is "Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices". This standard covers: For application in equipment containing semiconductor devices for circuits up to 1000 V a.c. to circuits of nominal voltages up to 1500 V d.c. Establishes characteristics of semiconductor fuse-links in such a way that they can be replaced by other fuse-links having the same characteristics provided their dimensions are identical. Defines standard conditions for operation in service, characteristics of fuses, markings, standard conditions for construction and tests. Appendix A provides a guide for the coordination of fuse-links with semiconductor devices. Note: - To be read in conjunction with EN 60269-1.
For application in equipment containing semiconductor devices for circuits up to 1000 V a.c. to circuits of nominal voltages up to 1500 V d.c. Establishes characteristics of semiconductor fuse-links in such a way that they can be replaced by other fuse-links having the same characteristics provided their dimensions are identical. Defines standard conditions for operation in service, characteristics of fuses, markings, standard conditions for construction and tests. Appendix A provides a guide for the coordination of fuse-links with semiconductor devices. Note: - To be read in conjunction with EN 60269-1.
EN 60269-4:1996 is classified under the following ICS (International Classification for Standards) categories: 29.120.50 - Fuses and other overcurrent protection devices. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60269-4:1996 has the following relationships with other standards: It is inter standard links to EN 60269-4:2007, EN 60269-4:1996/A2:2003, EN 60269-4:1996/A1:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60269-4:1996 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 60269-4:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the
protection of semiconductor devices (IEC 60269-4:1986)
Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection
of semiconductor devices
Niederspannungssicherungen -- Teil 4: Zusätzliche Anforderungen an
Sicherungseinsätze zum Schutz von Halbleiter-Bauelementen
Fusibles basse tension -- Partie 4: Prescriptions supplémentaires concernant les
éléments de remplacement utilisés pour la protection des dispositifs à semi-conducteurs
Ta slovenski standard je istoveten z: EN 60269-4:1996
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...