EN 62769-109-1:2015

SLOVENSKI STANDARD
01-november-2015
9NOMXþLWHYSURFHVQHQDSUDYH)',GHO3URILOL+$57ŠLQEUH]åLþQL+$57Š
,(&
Field Device Integration (FDI) - Part 109-1: Profiles - HART(r) and WirelessHART(r) (IEC
62769-109-1:2015)
Feldgeräteintegration (FDI) - Profile - Teil 109-1: HART(r) und WirelessHART(r) (IEC
62769-109-1:2015)
Intégration des appareils de terrain (FDI) - Partie 109-1: Profils - HART(r) et
WirelessHART(r) (IEC 62769-109-1:2015)
Ta slovenski standard je istoveten z: EN 62769-109-1:2015
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62769-109-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 25.040.40; 35.100
English Version
Field Device Integration (FDI) - Part 109-1: Profiles - HART(r)
and WirelessHART(r)
(IEC 62769-109-1:2015)
Intégration des appareils de terrain (FDI) - Partie 109-1: Feldgeräteintegration (FDI) - Profile - Teil 109-1: HART(r)
Profils - HART(r) et WirelessHART(r) und WirelessHART(r)
(IEC 62769-109-1:2015) (IEC 62769-109-1:2015)
This European Standard was approved by CENELEC on 2015-06-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62769-109-1:2015 E

Foreword
The text of document 65E/356/CDV, future edition 1 of IEC 62769-109-1, prepared by SC 65E
"Devices and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62769-109-1:2015.
The following dates are fixed:
(dop) 2016-03-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-06-23
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62769-109-1:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated :
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
IEC 61804 (series) NOTE Harmonized as EN 61804 (series).
IEC 62769-1 NOTE Harmonized as EN 62769-1.
IEC 62769-2 NOTE Harmonized as EN 62769-2.
1)
NOTE Harmonized as EN 62769-3
IEC 62769-3
IEC 62769-6 NOTE Harmonized as EN 62769-6.

1) To be published.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 62541-100 -  OPC unified architecture - Part 100: Device EN 62541-100 -
Interface
IEC 62769-4 2015 Field Device Integration (FDI) - Part 4: FDI - -
Packages
IEC 62769-5 -  Field Device Integration (FDI) - Part 5: FDI - -
Information Model
IEC 62769-7 -  Field Device Integration (FDI) - Part 7: FDI - -
Communication Devices
IEC 62769-109-1 ®
Edition 1.0 2015-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Field Device Integration (FDI) –

Part 109-1: Profiles – HART® and WirelessHART®

Intégration des appareils de terrain (FDI) –

Partie 109-1: Profils – HART® et WirelessHART®

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100 ISBN 978-2-8322-2638-4

– 2 – IEC 62769-109-1:2015  IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviated terms and acronyms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms and acronyms . 7
4 Conventions . 8
4.1 EDDL syntax . 8
4.2 XML syntax . 8
4.3 Capitalizations . 8
® ®
5 Profile for CP 9/1 (HART ) or CP 9/2 (WirelessHART ) . 9
5.1 General . 9
5.2 Catalog profile . 9
5.2.1 Protocol support file . 9
5.2.2 CommunicationProfile definition . 9
5.2.3 Profile device . 9
5.2.4 Protocol version information . 9
5.3 Associating a Package with a CP 9/1 device . 10
5.3.1 Device type identification mapping . 10
5.3.2 Device type revision mapping . 10
5.4 Information Model mapping . 10
5.4.1 ProtocolType definition . 10
5.4.2 DeviceType mapping . 11
5.4.3 FunctionalGroup Identification definition . 11
5.5 Topology elements . 11
5.5.1 ConnectionPoint definition . 11
5.5.2 Communication Device definition . 17
5.5.3 Communication service provider definition . 18
5.5.4 Network definition . 19
5.6 Methods . 19
5.6.1 Methods for FDI Communication Servers . 19
5.6.2 Methods for Gateways . 23
Annex A (normative) Topology scan schema . 31
A.1 General . 31
A.2 IdentificationType . 31
A.3 AddressTypeTP . 33
A.4 AddressTypeIP . 34
A.5 AddressTypeTDMA . 34
A.6 AddressType . 35
A.7 ConnectionPointType . 36
A.8 NetworkType . 36
A.9 Network . 37
Annex B (normative) Transfer service parameters . 38
B.1 General . 38

IEC 62769-109-1:2015  IEC 2015 – 3 –
B.2 receiveData . 38
B.3 sendData . 38
B.4 TransferResultDataT . 38
B.5 TransferSendDataT . 39
Bibliography . 40

Table 1 – CommunicationProfile definition . 9
Table 2 – Catalog values for profile devices . 9
Table 3 – Protocol Version Information . 10
Table 4 – Device type catalog mapping . 10
Table 5 – ProtocolType HART definition . 10
Table 6 – Inherited DeviceType Property mapping . 11
Table 7 – Identification parameters . 11
Table 8 – ConnectionPointType HART_TP definition . 12
Table 9 – ConnectionPointType HART_IP Definition . 15
Table 10 – ConnectionPointType HART_TDMA Definition . 16
Table 11 – Method Connect arguments . 20
Table 12 – Method Disconnect arguments . 20
Table 13 – Method Transfer arguments . 21
Table 14 – Method GetPublishedData arguments. 22
Table 15 – Met
...