iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60974-7:2000

(Main)

Arc welding equipment - Part 7: Torches

Arc welding equipment - Part 7: Torches

Specifies safety and construction requirements for torches consisting of the torch body, the cable-hose assembly and other components. It does not apply to to torches for air-arc cutting/ gouging

Lichtbogenschweißeinrichtungen - Teil 7: Brenner

Matériel de soudage à l'arc - Partie 7: Torches

Spécifie les régles de sécurité et de construction des torches comprenant le corps de torche, le faisceau et autres composants. Ne s'applique pas aux torches pour le coupage/gougeage air-arc.

Arc welding equipment - Part 7: Torches

General Information

Status
Withdrawn
Publication Date
26-Apr-2000
Withdrawal Date
30-Nov-2002
ICS
25.160.30 - Welding equipment
Technical Committee
CLC/TC 26 - Electric welding
Drafting Committee
IEC/TC 26 - IEC_TC_26
Parallel Committee
IEC/TC 26 - IEC_TC_26
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Aug-2008
Completion Date
01-Aug-2008
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 60974-7:2001 - Arc welding equipment -- Part 7: Torches

Relations

Replaces
EN 50192:1995 - Arc welding equipment - Plasma cutting systems for manual use
Effective Date
29-Jan-2023
Replaced By
EN 60974-7:2005 - Arc welding equipment - Part 7:Torches
Effective Date
28-Jan-2023

Buy Standard

EN 60974-7:2001EN 60974-7:2001
PreviousNext
Standard
EN 60974-7:2001
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2001
1DGRPHãþD
SIST EN 50078:1996
Arc welding equipment - Part 7: Torches
Arc welding equipment -- Part 7: Torches
Lichtbogenschweißeinrichtungen -- Teil 7: Brenner
Matériel de soudage à l'arc -- Partie 7: Torches
Ta slovenski standard je istoveten z: EN 60974-7:2000
ICS:
25.160.30 Varilna oprema Welding equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60974-1:2022/A12:2023(Amendment)
Arc welding equipment - Part 1: Welding power sources
SIST EN IEC 60974-1:2023/A12:2023
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62822-3:2023(Main)
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 3: Resistance welding equipment
SIST EN IEC 62822-3:2023

IEC 62822-3:2023 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen. More generally, this document covers equipment for which the welding current flows in an electrical circuit whose geometry cannot be changed and regardless of the technology of the current generator (for example LF-AC, MF-DC for spot or seam welding or capacitive discharge used for stud welding). This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) inclusion of the uncertainties in the results of the assessment; b) simplification of the methods of exposure assessment.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-1:2022/A11:2022(Amendment)
Arc welding equipment - Part 1: Welding power sources
SIST EN IEC 60974-1:2023/A11:2023

Common Mod in order to cover EU Ecodesign requirements on IEC 60974-1 It is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means. This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-1:2022(Main)
Arc welding equipment - Part 1: Welding power sources
SIST EN IEC 60974-1:2023

This part of IEC 60974 is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means. This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.

  • Standard
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-14:2018/AC:2022-02(Corrigendum)
Arc welding equipment - Part 14: Calibration, validation and consistency testing
SIST EN IEC 60974-14:2019/AC:2022

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62135-2:2021(Main)
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
SIST EN IEC 62135-2:2022

IEC 62135-2:2020 is available as IEC 62135-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62135-2:2020 is applicable to equipment for resistance welding and allied processes which are connected to mains supplies with rated voltages up to 1 000 V AC RMS. This document does not define safety requirements. This third edition cancels and replaces the second edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update of the applicable limits related to the updated references; - implementation of radiated magnetic field requirements.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-10:2021(Main)
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
SIST EN IEC 60974-10:2022

IEC 60974-10:2014 specifies a) applicable standards and test methods for radio-frequency (RF) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - inclusion of optional use of a decoupling network and a load outside the test chamber; - inclusion of an alternative test setup for portable equipment; - inclusion of test conditions for complex controls, liquid cooling systems and arc striking and stabilizing devices; - update of the applicable limits related to the updated reference to CISPR 11; - exclusion of the use of narrow band relaxations for RF emission limits; - update of the applicable limits for harmonics and flicker and inclusion of flow-charts related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12; - update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34; - update of the informative annex for installation and use; - inclusion of symbols to indicate the RF equipment class and restrictions for use.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-13:2021(Main)
Arc welding equipment - Part 13: Welding current return clamp
SIST EN IEC 60974-13:2021

This part of IEC 60974 is applicable to WELDING CURRENT RETURN CLAMPS for arc welding processes, designed to make an electrical connection to the workpiece without using tools. This document is not applicable to WELDING CURRENT RETURN CLAMPS for underwater welding and plasma cutting. This document specifies safety and performance requirements of WELDING CURRENT RETURN CLAMPS. This document does not specify requirements for welding cables.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-3:2019(Main)
Arc welding equipment - Part 3: Arc striking and stabilizing devices
SIST EN IEC 60974-3:2020

This part of IEC 60974 specifies safety requirements for industrial and professional ARC STRIKING and ARC STABILIZING DEVICES used in arc welding and allied processes. This document is applicable to ARC STRIKING and STABILIZING DEVICES which are stand-alone (separate from the welding equipment) or built in (housed in a single enclosure with other arc welding equipment). NOTE 1 Typical allied processes are, for example, plasma arc cutting and arc spraying. NOTE 2 This document does not include electromagnetic compatibility (EMC) requirements.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60974-7:2019(Main)
Arc welding equipment - Part 7: Torches
SIST EN IEC 60974-7:2020

This part of IEC 60974 specifies safety and construction requirements for TORCHES used for arc welding and allied processes. This document is applicable to MANUAL, MECHANICALLY GUIDED, AIR-COOLED, LIQUID-COOLED, MOTORIZED, SPOOL-ON and FUME EXTRACTION TORCHES. In this document, a TORCH consists of the TORCH BODY, the CABLE-HOSE ASSEMBLY and other components. This document is also applicable to a CABLE-HOSE ASSEMBLY connected between a power source and ancillary equipment. This document is not applicable to electrode holders for manual metal arc welding or air-arc cutting/gouging. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 Other components are listed in Table A.1. NOTE 3 In this document, all procedures and requirements are the same for "TORCHES" and "GUNS". For convenience, the term "TORCH" is used in the following text.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day