EN 62356-3:2004

STANDARD(istoveten EN 62356-3:2004)Video snemanje – Format vrste D-11 z magnetnim trakom s širino 12,65 mm – 3. del: Preslikave podatkov s sistemom SDTI (IEC 62356-3:2003)Video recording – 12,65 mm type D-11 format – Part 3: Data mapping over SDTI (IEC 62356-3:2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 62356-3:2006(en)ICS33.160.40

EUROPEAN STANDARD
EN 62356-3 NORME EUROPÉENNE EUROPÄISCHE NORM
October 2004 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62356-3:2004 E
ICS 33.160.40
English version
Video recording –
12,65 mm type D-11 format Part 3: Data mapping over SDTI (IEC 62356-3:2003)
Enregistrement Vidéo –
Format 12,65 mm de type D11 Partie 3: Mappage de données à travers l'interface de transport de données série (SDTI) (CEI 62356-3:2003)
Videoaufzeichnung –
D-11-Format mit 12,65 mm Teil 3: Datenabbildung über SDTI (IEC 62356-3:2003)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

at national level by publication of an identical
national standard or by endorsement
(dop) 2005-09-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2007-09-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62356-3:2003 was approved by CENELEC as a European Standard without any modification. __________

- 3 - EN 62356-3:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62356-2 2003 Video recording - 12,65 mm type D-11 format Part 2: Picture compression and data stream
EN 62356-2 2004 SMPTE 259M 1997 Television - 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface
- - SMPTE 272M 1994 Television - Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary Data Space
- - SMPTE 291M 1998 Television - Ancillary data packet and space formatting
- - SMPTE 305M 2000 Television -Serial data transport interface (SDTI)
- - SMPTE RP 165 1994 Error detection check words and status flags for use in bit-serial digital interfaces for television
- - SMPTE RP 188 1999 Transmission of time code and control code in the ancillary data space of a digital television data stream
- - AES3 1992 Serial transmission format for two-channel linearly represented digital audio data
- -
INTERNATIONALSTANDARDIEC62356-3First edition2003-11Video recording –12,65 mm type D-11 format –Part 3:Data mapping over SDTI IEC 2003

Copyright - all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing from the publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chPFor price, see current cataloguePRICE CODECommission Electrotechnique InternationaleInternational Electrotechnical Commission

– 2 –62356-3  IEC:2003(E)CONTENTSFOREWORD.31Scope.52Normative references.53General specifications.64Header data.74.1Location of the header data.74.2Structure of the header data.75Payload data.85.1Location of
type D-11 stream data.85.2Structure and contents of the SDTI payload lines.86AES3 data.116.1General.116.2Location of AES3 data.117Auxiliary data.127.1General.127.2Location of auxiliary data.127.3VITC.128EDH.12Annex A (normative)
SDI and SDTI Operation at 24/1,001Hz.13Annex B (informative)
SDI and SDTI Operation at 24Hz.14Bibliography.15Figure 1 – SDTI mapping.6Figure 2 – Payload data stream structure.9Figure 3 – Addition of reserved word and ECC to a compressed picture basic block.10Figure 4 – Addition of reserved word and ECC to an auxiliary basic block.10Table 1 – Total number of lines and total number of samples per line
for each framerate of the interface.7Table 2 – Contents of header data (total words: 53).7Table 3 – Location of compressed picture data.8Table 4 – Contents of compressed picture data.8Table 5 – Location of AES3 data.11Table 6 – Location of auxiliary data (vertical position).12Table 7 – VITC H-ANC packet.12Table A.1 – Interface sampling structure/formatting.13Table B.1 – Interface sampling structure/formatting.14

62356-3  IEC:2003(E)– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________VIDEO RECORDING – 12,65 mm TYPE D-11 FORMAT −−−−Part 3: Data mapping over SDTIFOREWORD1)The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, IEC publishes International Standards, Technical Specifications,Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IECPublication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interestedin the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closelywith the International Organization for Standardization (ISO) in accordance with conditions determined byagreement between the two organizations.2)The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internationalconsensus of opinion on the relevant subjects since each technical committee has representation from allinterested IEC National Committees.3)IEC Publications have the form of recommendations for international use and are accepted by IEC NationalCommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IECPublications is accurate, IEC cannot be held responsible for the way in which they are used or for anymisinterpretation by any end user.4)In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicationstransparently to the maximum extent possible in their national and regional publications. Any divergencebetween any IEC Publication and the corresponding national or regional publication shall be clearly indicated inthe latter.5)IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with an IEC Publication.6)All users should ensure that they have the latest edition of this publication.7)No liability shall attach to IEC or its directors, employees, servants or agents including individual experts andmembers of its technical committees and IEC National Committees for any personal injury, property damage orother damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) andexpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IECPublications.8)Attention is drawn to the Normative references cited in this publication. Use of the referenced publications isindispensable for the correct application of this publication.9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject ofpatent rights. IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 62356-3 has been prepared by IEC technical committee 100:Audio, video and multimedia systems and equipment.It was submitted to the ntional committees for voting under the Fast Track Procedure as thefollowing documents:CDVReport on voting100/631/CDV100/701/RVCFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 –62356-3  IEC:2003(E)The committee has decided that the contents of this publication will remain unchanged until2008-11. At this date, the publication will be•reconfirmed;•withdrawn;•replaced by a revised edition, or•amended.

62356-3  IEC:2003(E)– 5 –VIDEO RECORDING – 12,65 mm TYPE D-11 FORMAT −−−−Part 3: Data mapping over SDTI1 ScopeThis International Standard specifies the mapping of
type D-11 compressed picture datastream into the SDTI payload area (SMPTE 305.2M) together with the mapping of fourchannels of AES3 data and time-code data into H-ANC packets.
Type D-11 compressedpicture data-stream mapping is defined for source-coded picture rates of 24/1,001/P,24/P,25/P, 50-I, 30/1,001/P and 60/1,001. For the transmission of compressed picture data codedat source picture rates of 25/P and 50/I, the SDTI interface operates at a frame rate of 25 Hz.For the transmission of compres
...