EN 61969-3:2001

SLOVENSKI STANDARD
01-september-2002
Mechanical structures for electronic equipment - Outdoor enclosures - Part 3:
Sectional specification - Climatic, mechanical tests and safety aspects for cabinets
and cases (IEC 61969-3:2001)
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 3: Sectional
specification - Climatic, mechanical tests and safety aspects for cabinets and cases
Mechanische Bauweisen für elektronische Einrichtungen - Außengehäuse -- Teil 3:
Strukturnorm - Klimatische, mechanische Prüfungen und Sicherheitsaspekte für
Schränke und Gestelle
Structures mécaniques pour équipement électronique - Enveloppes de plein air -- Partie
3: Spécification intermédiaire - Essais climatiques, mécaniques et aspects de la sécurité
des baies et coffrets
Ta slovenski standard je istoveten z: EN 61969-3:2001
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61969-3
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
ICS 31.240
English version
Mechanical structures for electronic equipment -
Outdoor enclosures
Part 3: Sectional specification -
Climatic, mechanical tests and safety aspects for cabinets and cases
(IEC 61969-3:2001)
Structures mécaniques pour équipement Mechanische Bauweisen für elektronische
électronique - Einrichtungen -
Enveloppes de plein air Außengehäuse
Partie 3: Spécification intermédiaire - Teil 3: Strukturnorm -
Essais climatiques, mécaniques et Klimatische, mechanische Prüfungen und
aspects de la sécurité des baies et Sicherheitsaspekte für Schränke und
coffrets Gestelle
(CEI 61969-3:2001) (IEC 61969-3:2001)
This European Standard was approved by CENELEC on 2001-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61969-3:2001 E
Foreword
The text of document 48D/258/FDIS, future edition 1 of IEC 61969-3, prepared by SC 48D,
Mechanical structures for electronic equipment, of IEC TC 48, Electromechanical components and
mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61969-3 on 2001-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61969-3:2001 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61969-3:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068-2 Series Environmental testing EN 60068-2 Series
Part 2: Tests
1) 2)
IEC 60439-5 Low-voltage switchgear and controlgear EN 60439-5 1996
assemblies
Part 5: Particular requirements for
assemblies intended to be installed
outdoors in public places - Cable
distribution cabinets (CDCs) for power
distribution in networks
1) 2)
IEC 60529 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993
1) 2)
IEC 60721-3-2 Classification of environmental EN 60721-3-2 1997
conditions
Part 3: Classification of groups of
environmental parameters and their
severities -- Section 2: Transportation
1) 2)
IEC 60721-3-4 Part 3: Classification of groups of EN 60721-3-4 1995
environmental parameters and their
severities -- Section 4: Stationary use at
non-weatherprotected locations
1) 2)
IEC 60950 (mod) Safety of information technology EN 60950 2000
equipment
1) 2)
IEC 61587-1 Mechanical structures for electronic EN 61587-1 1999
equipment - Tests for IEC 60917 and
IEC 60297
Part 1: Climatic, mechanical tests and
safety aspects for cabinets, racks,
subracks and chassis
1)
undated reference.
2)
valid edition at date of issue.

Publication Year Title EN/HD Year
1) 2)
IEC 61587-2 Part 2: Seismic tests for cabinets and EN 61587-2 2001
racks
1)
IEC 61587-3 Part 3: Electromagnetic shielding --
performance tests for cabinets, racks
and subracks
NORME
CEI
INTERNATIONALE IEC
61969-3
INTERNATIONAL
Première édition
STANDARD
First edition
2001-06
Structures mécaniques pour équipement
électronique –
Enveloppes de plein air –
Partie 3:
Spécification intermédiaire –
Essais climatiques, mécaniques et aspects
de la sécurité des baies et coffrets
Mechanical structures for electronic equipment –
Outdoor enclosures –
Part 3:
Sectional specification –
Climatic, mechanical tests and safety aspects
for cabinets and cases
© IEC 2001 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
J
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61969-3 © IEC:2001 – 3 –
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Definitions. 9
4 Classification of environmental conditions. 9
5 Test conditions. 11
5.1 Climatic tests . 11
5.2 Biological tests. 11
5.3 Tests of resistance against chemically active substances . 13
5.4 Tests of resistance against mechanically active substances . 13
6 Mechanical tests . 13
6.1 Dynamic tests . 15
6.2 Lifting and stiffness test . 15
7 Safety aspects . 15
7.1 Locking devices . 17
7.2 Vandalism resistance . 17
7.3 Bullet resistance . 17
8 Seismic requirements. 17
9 Electromagnetic shielding performance . 17

61969-3 © IEC:2001 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
OUTDOOR ENCLOSURES –
Part 3: Sectional specification –
Climatic, mechanical tests and safety aspects
for cabinets and cases
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possi
...