EN 61169-24:2001

SLOVENSKI STANDARD
01-januar-2004
[Not translated]
Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial
connectors with screw coupling, typically for use in 75 ohm cable distribution systems
(type F) (IEC 61169-24:2001)
Hochfrequenz-Steckverbinder - Teil 24 Rahmenspezifikation - Koaxiale
Hochfrequenzsteckverbinder mit Schraubkupplung, vorzugsweise für den Einsatz in 75
Ohm Kabelverteilnetzen (Typ F) (IEC 61169-24:2001)
Connecteurs pour fréquences radioélectriques - Partie 24: Spécification intermédiaire -
Connecteurs coaxiaux pour fréquences radioélectriques avec couplage vissé,
spécifiquement utilisés dans les systèmes de distribution des câbles 75 ohm (série F)
(CEI 61169-24:2001)
Ta slovenski standard je istoveten z: EN 61169-24:2001
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61169-24
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2001
ICS 31.220.10
English version
Radio-frequency connectors
Part 24: Sectional specification -
Radio frequency coaxial connectors with screw coupling,
typically for use in 75 ohm cable distribution systems (type F)
(IEC 61169-24:2001)
Connecteurs pour fréquences Hochfrequenz-Steckverbinder
radioélectriques Teil 24 Rahmenspezifikation -
Partie 24: Spécification intermédiaire - Koaxiale Hochfrequenzsteckverbinder
Connecteurs coaxiaux pour fréquences mit Schraubkupplung, vorzugsweise für
radioélectriques avec couplage vissé, den Einsatz in 75 Ohm Kabelverteilnetzen
spécifiquement utilisés dans les systèmes (Typ F)
de distribution des câbles 75 ohm (IEC 61169-24:2001)
(série F)
(CEI 61169-24:2001)
This European Standard was approved by CENELEC on 2001-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61169-24:2001 E
Foreword
The text of document 46D/338/FDIS, future edition 1 of IEC 61169-24:2001, prepared by SC 46D, RF
connectors, of IEC TC 46, Cables, wires, waveguides, RF connectors, and accessories for
communication and signalling, was submitted to the IEC-CENELEC parallel vote and was approved
by CENELEC as EN 61169-24 on 2001-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-12-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61169-24:2001 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61169-24:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 61169-1 1992 Radio-frequency connectors EN 61169-1 1994
Part 1: Generic specification - General
requirements and measuring methods

NORME CEI
INTERNATIONALE IEC
61169-24
INTERNATIONAL
Première édition
STANDARD
First edition
2001-11
Connecteurs pour fréquences radioélectriques –
Partie 24:
Spécification intermédiaire –
Connecteurs coaxiaux pour fréquences
radioélectriques avec couplage vissé,
spécifiquement utilisés dans les systèmes
de distribution des câbles 75 ohms (série F)
Radio-frequency connectors –
Part 24:
Sectional specification –
Radio frequency coaxial connectors with
screw coupling, typically for use in 75 ohm
cable distribution systems (type F)

 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
Q
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61169-24 © IEC:2001 – 3 –
CONTENTS
FOREWORD.5

1 Scope.7

2 Normative reference .7

3 Interface dimensions.7

3.1 Dimensions .7
3.2 Mechanical gauges.13
4 Quality assessment procedures .13
4.1 General.13
4.2 Ratings and characteristics.13
4.3 Test shedule and ispection requirements .17
4.4 Procedures .19
5 Instructions for preparation of detail specifications .21
5.1 General.21
5.2 Identification of the detail specification .21
5.3 Identification of the component.21
5.4 Performance .23
5.5 Marking, ordering information and related matters .23
5.6 Selection of tests, test conditions and severities .23
5.7 Blank detail specification pro-forma for type F connector .25

61169-24 © IEC:2001 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
RADIO-FREQUENCY CONNECTORS –
Part 24: Sectional specification –

Radio frequency coaxial connectors with screw coupling,

typically for use in 75 ohm cable distribution systems (type F)

FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61169-24 has been prepared by subcommittee 46D: RF connectors,
of IEC technical committee 46: Cables, wires, waveguides, RF connectors and accessories for
communication and signalling.
The text of this standard is based on the following documents:
FDIS Report on voting
46D/338/FDIS 46D/341/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged
until 2007. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
61169-24 © IEC:2001 – 7 –
RADIO-FREQUENCY CONNECTORS –
Part 24: Sectional specification –

Radio frequency coaxial connectors with screw coupling,

typically for use in 75 ohm cable distribution systems (type F)

1 Scope
This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for RF coaxial connectors with screw coupling,
typically for use in 75 Ω cable distribution systems (type F).
It describes the interface dimensions for general purpose grade 2 connectors, dimensional
details for standard test connectors, grade 0, together with gauging information and the
mandatory tests selected from IEC 61169-1, applicable to all DS relating to type F connectors.
This specification indicates the recommended performance characteristics to be considered
when writing a DS and covers test schedules and inspection requirements.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61169-1:1992, Radio-frequency connectors – Part 1: Generic specification – General
requirements and measuring methods
3 Interface dimensions
3.1 Dimensions
Millimetres are original dimensions.
All undimensioned pictorial configurations are for reference purposes only.

61169-24 © IEC:2001 – 9 –
3.1.1 Connector with pin centre contact

IEC  2204/01
For notes 1, 2 and 3, see next page.
mm in
Reference
Min. Max. Min. Max.
a 4,95 6,86 0,195 0,270
b – 7,29 – 0,287
c – 0,25 – 0,010
d 0,51 1,63 0,020 0,064
e – 12,95 – 0,510
f – 3,8 – 0,149
Figure 1 – Connector with pin centre contact

61169-24 © IEC:2001 – 11 –
3.1.2 Connector with socket centre contact

IEC  2205/01
mm in
Reference
Min. Max. Min. Max.
g –– ––
h 3,86 – 0,152 –
i 0,30 – 0,012 –
j 5,56 – 0,219 –
k 7,0 – 0,273 –
...