EN IEC 60127-1:2024
(Main)Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
This part of IEC 60127 covers the general requirements and tests applicable to all types of miniature fuse-links (e.g. cartridge fuse-links, sub-miniature fuse-links, universal modular fuse-links and miniature fuse-links for special applications) for the protection of electric appliances, electronic equipment and component parts thereof normally intended to be used indoors. This standard does not apply to fuses intended for the protection of low-voltage electrical installations. These are covered by IEC 60269, Low Voltage Fuses. Specific details covering each major subdivision are given in subsequent parts. This standard does not apply to fuses for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. The object of this standard is a) to establish uniform requirements for miniature fuses so as to protect appliances or parts of appliances in the most suitable way, b) to define the performance of the fuses, so as to give guidance to designers of electrical appliances and electronic equipment and to ensure replacement of fuse-links by those of similar dimensions and characteristics, c) to define methods of testing, d) to define maximum sustained dissipation of fuse-links to ensure good compatibility of stated power acceptance when used with fuse-holders according to this standard (see IEC 60127-6).
Geräteschutzsicherungen - Teil 1: Begriffe für Geräteschutzsicherungen und allgemeine Anforderungen an G-Sicherungseinsätze
Coupe-circuits miniatures - Partie 1: Définitions pour coupe-circuits miniatures et exigences générales pour éléments de remplacement miniatures
IEC 60127-1:2023 est disponible sous forme de IEC 60127-1:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 60127-1:2023 couvre les exigences générales et les essais applicables à tous les types d’éléments de remplacement miniatures (par exemple, éléments de remplacement à cartouches, éléments de remplacement subminiatures, éléments de remplacement modulaires universels et éléments de remplacement miniatures pour applications spéciales) employés pour la protection des appareils électriques, du matériel électronique et de leurs constituants, normalement destinés à être utilisés à l'intérieur. Le présent document ne s'applique pas aux coupe-circuits destinés à la protection des installations électriques à basse tension. Ces derniers sont couverts par l'IEC 60269, Fusibles basse tension. Des informations détaillées spécifiques concernant chaque subdivision principale sont indiquées dans les parties subséquentes. Le présent document ne s’applique pas aux coupe-circuits placés dans des appareils destinés à être utilisés dans des conditions particulières, telles qu’une atmosphère corrosive ou explosive. Le présent document a pour objet - d’établir des exigences uniformes pour les coupe-circuits miniatures de manière à assurer la protection des appareils ou des parties d'appareils de la façon la plus appropriée; - de définir les caractéristiques des coupe-circuits de manière à fournir des recommandations aux concepteurs d'appareils électriques et de matériel électronique, et à assurer le remplacement des éléments de remplacement par - d'autres de dimensions et de caractéristiques identiques; - de définir des méthodes d'essai; - de définir la puissance dissipée maximale des éléments de remplacement pour assurer une bonne compatibilité de la puissance admissible indiquée avec celle des ensembles-porteurs selon le présent document (voir l’IEC 60127-6).
Miniaturne varovalke - 1. del: Definicije za miniaturne varovalke in splošne zahteve za miniaturne taljive vložke
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60127-1:2022
01-junij-2022
Miniaturne varovalke - 1. del: Definicije za miniaturne varovalke in splošne zahteve
za miniaturne taljive vložke
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for
miniature fuse-links
Geräteschutzsicherungen - Teil 1: Begriffe für Geräteschutzsicherungen und allgemeine
Anforderungen an G-Sicherungseinsätze
Coupe-circuits miniatures - Partie 1: Définitions pour coupe-circuits miniatures et
exigences générales pour éléments de remplacement miniatures
Ta slovenski standard je istoveten z: prEN IEC 60127-1:2022
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
oSIST prEN IEC 60127-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 60127-1:2022
oSIST prEN IEC 60127-1:2022
32C/600/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60127-1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-04-08 2022-07-01
SUPERSEDES DOCUMENTS:
32C/588/CD, 32C/594/CC
IEC SC 32C : MINIATURE FUSES
SECRETARIAT: SECRETARY:
China Mr Jianqiang Zou
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature
fuse-links
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
The mark of changes indicate the revision compared to the CD document (32C/588/CD).
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 60127-1:2022
– 2 – IEC CDV 60127-1:© 2022
1 CONTENTS
2 1 Scope and object . 7
3 2 Normative references . 7
4 3 Terms and definitions . 7
5 4 General requirements . 11
6 5 Standard ratings . 11
7 6 Marking . 11
8 7 General notes on tests . 12
9 7.1 Atmospheric conditions for testing . 12
10 7.2 Type tests . 13
11 7.3 Fuse-bases for tests . 13
12 7.4 Nature of supply . 13
13 8 Dimensions and construction . 14
14 8.1 Dimensions . 14
15 8.2 Construction . 14
16 8.3 Terminations . 14
17 8.4 Alignment and configuration of terminations . 14
18 8.5 Soldered joints . 14
19 9 Electrical requirements . 14
20 9.1 Voltage drop . 14
21 9.2 Time/current characteristic . 15
22 9.2.1 Time/current characteristic at normal ambient temperature . 15
23 9.2.2 Test at elevated temperature . 15
24 9.2.3 Test procedure . 15
25 9.2.4 Presentation of results . 16
26 9.3 Breaking capacity . 16
27 9.3.1 Operating conditions . 16
28 9.3.2 Criteria for satisfactory performance . 17
29 9.3.3 Insulation resistance . 17
30 9.3.4 Type test for fuse-links of homogeneous series . 17
31 9.4 Endurance tests . 17
32 9.5 Maximum sustained dissipation . 18
33 9.7 Fuse-link temperature . 18
34 Annex A (informative) Colour coding for miniature fuse-links . 19
35 Annex B (informative) Example presentations of time/current characteristic . 21
36 Annex C (informative) Audit testing and surveillance – Guidelines for the application of
37 the principles of IECEE 03 (CB-FCS) to miniature fuse-links . 23
38 C.1 Introductory remarks . 23
39 C.2 Overview . 23
40 C.3 Terms of reference . 23
41 C.4 Conformity Assessment Report . 23
42 C.4.1 Product description . 23
43 C.4.2 Identification of significant samples . 24
44 C.5 Use of the standard . 25
45 C.6 Audit test and surveillance programme options . 25
46 C.6.1 Audit testing and surveillance – Option 1 . 26
oSIST prEN IEC 60127-1:2022
IEC 60127-1:20XX – 3
47 C.6.2 Audit testing and surveillance – Option 2 . 26
48 C.6.3 Audit testing and surveillance – Option 3 . 26
49 C.6.4 Audit testing and surveillance – Option 4 . 27
50 C.7 Acceptability of audit test results . 28
51 C.8 Acceptability of surveillance results . 28
Annex D (informative) User guide for miniature fuses . 21
53 D.1 Introduction . 30
54 General . 30
D.2
55 D.3 Properties of miniature fuse-links . 30
56 Different types of fuse-links . 31
D.4
57 D.4.1 Characteristics . 31
58 D.4.2 Breaking capacity . 32
59 D.4.3 Cartridge fuse-links (IEC 60127-2) . 32
60 Sub-miniature fuse-links (IEC 60127-3) . 33
D.4.4
61 D.4.5 Universal Modular Fuse-links (IEC 60127-4) . 33
62 D.4.6 Miniature fuse-links for special applications (IEC 60127-7) . 334
63 D.5 Applications . 335
64 D.5.1 Applications – Fuse-link selection criteria . 335
65 D.5.2 Electrical criteria . 345
66 D.5.3 Mechanical/physical dimensions . 345
67 D.6 Protection by I t limitation and pulse operation . 356
68 D.6.1 I t value . 356
69 Pulse operation . 356
D.6.2
70 D.6.3 I t limitation . 356
71 D.7 Direct current (d.c.) applications . 357
72 D.7.1 General information . 357
73 Battery circuits . 367
D.7.2
74 D.7.3 Inductive load circuits . 36
75 D.8 Fuse-holders . 368
76 D.8.1 Features . 368
77 Safety aspects. 368
D.8.2
78 D.8.3 Selection of a fuse-holder . 368
80 D.8.4 Exchange of fuse-links under load . 379
81 D.9 Performance on extra-low voltages . 379
82 D.10 . Influence of ambient temperature 40
83 Bibliography . 40
85 Figure A.1– Layout of colour bands. 19
86 Figure B.1 – Example presentation of time/current characteristic, ratio 2:1 . 21
87 Figure B.2 – Example presentation of time/current characteristic, ratio 3:1 . 22
88 Figure C.1 – Example of a fuse-link description . 24
90 Table 1 – Prospective current/Breaking capcaity tolereance . 20
Table A.1 – Colour coding for miniature fuse-links . 20
92 Table C.1 – Audit testing for option 3 . 27
oSIST prEN IEC 60127-1:2022
– 4 – IEC CDV 60127-1:© 2022
93 Table C.2 – Audit testing for option 4 . 28
oSIST prEN IEC 60127-1:2022
IEC 60127-1:20XX – 5
95 INTERNATIONAL ELECTROTECHNICAL COMMISSION
97 ___________
99 MINIATURE FUSES –
101 Part 1: Definitions for miniature fuses and
102 general requirements for miniature fuse-links
105 FOREWORD
106 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
107 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
108 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
109 this en
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.