Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature

IEC 60749-6:2017(E) is to test and determine the effect on all solid state electronic devices of storage at elevated temperature without electrical stress applied. This test is typically used to determine the effects of time and temperature, under storage conditions, for thermally activated failure methods and time-to-failure of solid state electronic devices, including non-volatile memory devices (data-retention failure mechanisms). This test is considered non-destructive but should preferably be used for device qualification. If such devices are used for delivery, the effects of this highly accelerated stress test will need to be evaluated. Thermally activated failure mechanisms are modelled using the Arrhenius equation for acceleration, and guidance on the selection of test temperatures and durations can be found in IEC 60749-43. This edition includes the following significant technical changes with respect to the previous edition: a) additional test conditions; b) clarification of the applicability of test conditions.

Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 6: Lagerung bei hoher Temperatur

Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 6: Stockage à haute température

L’IEC 60749-6:2017 a pour objet de soumettre à essai et de déterminer, sur tous les dispositifs électroniques à semiconducteurs, l’effet du stockage à température élevée sans application de contrainte électrique. Cet essai est typiquement utilisé pour déterminer les effets de la durée d’exposition et de la température, dans des conditions de stockage, sur les modes de défaillance déclenchés par la chaleur et la durée de fonctionnement avant défaillance des dispositifs électroniques à semiconducteurs, comprenant les dispositifs à mémoire non volatile (mécanismes de défaillance liés à la conservation de données). Cet essai est considéré comme non destructif mais il convient de le privilégier pour la qualification des dispositifs. Si de tels dispositifs sont livrés, il est nécessaire d’évaluer les effets de cet essai de contrainte fortement accéléré. Les modes de défaillance déclenchés par la chaleur sont modélisés à partir de l’équation d’Arrhenius pour l’accélération, et des recommandations concernant le choix des températures d’essai et des durées d’exposition peuvent être consultées dans l’IEC 60749‑43. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) conditions d’essai supplémentaires; b) clarification de l’applicabilité des conditions d’essai.

Polprevodniški elementii - Mehanske in klimatske preskusne metode - 6. del: Shranjevanje pri visoki temperaturi (IEC 60749-6:2017)

Namen tega dela standarda IEC 60749 je preskušanje in ugotavljanje učinka na vse elektronske naprave za shranjevanje v trdnem stanju pri povišani temperaturi brez električne obremenitve. Ta preskus se običajno uporablja za ugotavljanje učinkov časa in temperature (v pogojih shranjevanja) za metode s toplotno aktiviranimi okvarami in merjenjem časa do trenutka okvare elektronskih naprav v trdnem stanju, vključno z nehlapnimi pomnilniškimi napravami (mehanizmi okvare z zadržanjem podatkov). Ta preskus se obravnava kot neporušitveni, vendar ga je treba pri kvalifikaciji naprav uporabljati prednostno. Če se tovrstne naprave uporabljajo za dostavo, je treba ovrednotiti učinke tega preskusa z močno pospešenim obremenjevanjem.
Mehanizmi za toplotno aktivirane okvare so modelirani z Arrheniusovo enačbo za pospeševanje, smernice glede izbire preskusnih temperatur in trajanj pa so na voljo v standardu IEC 60749-43.

General Information

Status
Published
Publication Date
15-Jun-2017
Withdrawal Date
06-Apr-2020
Current Stage
6060 - Document made available - Publishing
Start Date
16-Jun-2017
Completion Date
16-Jun-2017

Relations

Buy Standard

Standard
EN 60749-6:2017
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2017
1DGRPHãþD
SIST EN 60749-6:2004
Polprevodniški elementii - Mehanske in klimatske preskusne metode - 6. del:
Shranjevanje pri visoki temperaturi (IEC 60749-6:2017)
Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high
temperature (IEC 60749-6:2017)
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 6: Lagerung
bei hoher Temperatur (IEC 60749-6:2017)
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 6:
Stockage à haute température (IEC 60749-6:2017)
Ta slovenski standard je istoveten z: EN 60749-6:2017
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60749-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2017
ICS 31.080.01 Supersedes EN 60749-6:2002
English Version
Semiconductor devices - Mechanical and climatic test methods -
Part 6: Storage at high temperature
(IEC 60749-6:2017)
Dispositifs à semiconducteurs - Méthodes d'essais Halbleiterbauelemente - Mechanische und klimatische
mécaniques et climatiques - Partie 6: Stockage à haute Prüfverfahren - Teil 6: Lagerung bei hoher Temperatur
température (IEC 60749-6:2017)
(IEC 60749-6:2017)
This European Standard was approved by CENELEC on 2017-04-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60749-6:2017 E
European foreword
The text of document 47/2347/FDIS, future edition 2 of IEC 60749-6, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60749-6:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-01-07
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-04-07
the document have to be withdrawn

This document supersedes EN 60749-6:2002.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60749-6:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60749-20 NOTE Harmonized as EN 60749-20.
1)
IEC 60749-43 NOTE Harmonized as EN 60749-43 .

1) At draft stage.
IEC 60749-6 ®
Edition 2.0 2017-03
INTERNATIONAL
STANDARD
Semiconductor devices – Mechanical and climatic test methods –

Part 6: Storage at high temperature

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.080.01 ISBN 978-2-8322-4003-8

– 2 – IEC 60749-6:2017 © IEC 2017
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test apparatus . 5
5 Procedure . 5
5.1 Test conditions . 5
5.2 Measurements . 6
5.3 Failure crieria . 6
6 Summary . 7
Bibliography . 8

Table 1 – High temperature storage conditions . 6

IEC 60749-6:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
MECHANICAL AND CLIMATIC TEST METHODS –

Part 6: Storage at high temperature

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum e
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.