iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61340-3-2:2002

(Main)

Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing

Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing

Describes the discharge current waveforms used to define the MM and the basic equipment requirements used to develop these waveforms. Test parameters are defined for testing and classifying the electrostatic discharge (ESD) sensitivity of non-powered devices to the MM. The purpose of this standard is to establish a test model that will replicate MM failures and will define the MM transient current discharge waveform and all necessary test parameters to ensure reliable, reproducible test results. Reproducible data will allow accurate comparisons of MM ESD sensitivity levels.

Elektrostatik - Teil 3-2: Verfahren zur Simulation elektrostatischer Entladung - Machine Model (MM) - Bauelementeprüfung

Electrostatique - Partie 3-2: Méthodes pour la simulation des effets électrostatiques - Modèles de machine (MM) - Essais des composants

Décrit les formes d'onde de courant de décharge utilisées pour définir le MM et les prescriptions d'appareils de base utilisés pour développer ces formes d'onde. Les paramètres d'essai sont définis pour les essais et la classification de la sensibilité des décharges électrostatiques (ESD) des composants à semiconducteur dispositifs de faible puissance au MM. L'objet de cette norme est d'établir un modèle d'essai qui reproduit des défaillances du MM et définit la forme de la décharge de courant transitoire du MM et tous les paramètres d'essai nécessaires pour assurer des résultats d'essai fiableset reproductibles. Les données reproductibles permettent des comparaisons précises des niveaux de sensibilité des décharges électrostatiques (ESD) du MM.

Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing

General Information

Status
Withdrawn
Publication Date
03-Jun-2002
Withdrawal Date
30-Apr-2005
ICS
17.220.99 - Other standards related to electricity and magnetism
29.020 - Electrical engineering in general
Technical Committee
CLC/SR 101 - Electrostatics
Drafting Committee
IEC/TC 101 - IEC_TC_101
Parallel Committee
IEC/TC 101 - IEC_TC_101
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2010
Completion Date
01-Feb-2010
Ref Project
SIST EN 61340-3-2:2002 - Electrostatics -- Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing

Relations

Replaced By
EN 61340-3-2:2007 - Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
Effective Date
28-Jan-2023

Buy Standard

EN 61340-3-2:2002EN 61340-3-2:2002
PreviousNext
Standard
EN 61340-3-2:2002
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testingElektrostatik -- Teil 3-2: Verfahren zur Simulation elektrostatischer Entladung - Machine Model (MM) - BauelementeprüfungElectrostatique -- Partie 3-2: Méthodes pour la simulation des effets électrostatiques - Modèles de machine (MM) - Essais des composantsElectrostatics -- Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing17.220.99Drugi standardi v zvezi z elektriko in magnetizmomOther standards related to electricity and magnetismICS:Ta slovenski standard je istoveten z:EN 61340-3-2:2002SIST EN 61340-3-2:2002en01-september-2002SIST EN 61340-3-2:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDEN 61340-3-2NORME EUROPÉENNEEUROPÄISCHE NORMJune 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61340-3-2:2002 EICS 17.220.99;29.020English versionElectrostaticsPart 3-2: Methods for simulation of electrostatic effects -Machine model (MM) -Component testing(IEC 61340-3-2:2002)ElectrostatiquePartie 3-2: Méthodes pour la simulationdes effets électrostatiques -Modèles de machine (MM) -Essais des composants(CEI 61340-3-2:2002)ElektrostatikTeil 3-2: Verfahren zur Simulationelektrostatischer Entladung -Machine Model (MM) -Bauelementeprüfung(IEC 61340-3-2:2002)This European Standard was approved by CENELEC on 2002-05-01. CENELEC members are bound tocomply
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61340-5-1:2024(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
SIST EN IEC 61340-5-1:2024

IEC 61340-5-1:2024 applies to organizations that: manufacture, process, assemble, install, package, label, service, test, inspect, transport, or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V human body model (HBM) and 200 V charge device model (CDM). Also, protection from isolated conductors is addressed by limiting the voltage on isolated conductors to less than 35 V. ESDS with lower withstand voltages can require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this document. This document provides the requirements for an ESD control program. IEC TR 61340-5-2 provides guidance on the implementation of this document. This document does not apply to electrically initiated explosive devices, flammable liquids, gases, and powders. The purpose of this document is to provide the administrative and technical requirements for establishing, implementing, and maintaining an ESD control program (hereinafter referred to as the “program”). This edition includes the following significant technical changes with respect to the previous edition: a) definitions have been added to the document; b) updates to product qualification requirements; c) subclause 5.3.3 now includes a reference to groundable static control garment systems; d) Table 2 was replaced; e) subclause 5.3.4.2 was updated to define what an insulator is; f) subclause 5.3.4.3 was updated to include a definition for isolated conductor; g) Table 3 was updated, technical items added, including a reference to IEC 61340-5-4 for compliance verification testing; h) Table 4 was added as a summary of the requirements in IEC 61340-5-3 and to include requirements for compliance verification of packaging; i) Annex A was replaced: the former Annex is no longer required. Annex A are examples of tailoring.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-3:2016/AC:2023-08(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
SIST EN 61340-2-3:2016/AC:2023
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-1:2015/A1:2022(Amendment)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
SIST EN 61340-2-1:2016/A1:2022

This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and might not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, for example textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method might not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard shall not apply unless specifically referred to or included in the relevant publications.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-5-3:2022(Main)
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
SIST EN IEC 61340-5-3:2022

This part of IEC 61340 defines the ESD protective packaging properties needed to protect ESD sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of electrically initiated explosive materials or devices.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-6-1:2018(Main)
Electrostatics - Part 6-1: Electrostatic control for healthcare - General requirements for facilities
SIST EN IEC 61340-6-1:2019

IEC 61340-6-1:2018 applies to facilities that provide healthcare including hospitals, care centres and clinics. This document provides technical requirements and recommendations for controlling electrostatic phenomena in healthcare facilities, which includes requirements for equipment, materials, and products used to control static electricity. The requirements of this document do not apply to medical electrical equipment specified in IEC 60601-1 and in vitro diagnostic (IVD) medical equipment specified in IEC 61010‑2‑101.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-4-4:2018(Main)
Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
SIST EN IEC 61340-4-4:2018

NEW!IEC 61340-4-4:2018 is available as IEC 61340-4-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-4-4:2018 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere can be created by the contents in the FIBC or can exist outside the FIBC. The requirements include: – classification and labelling of FIBC; – classification of inner liners; – specification of test methods for each type of FIBC, inner liner, labels and document pockets; – design and performance requirements for FIBC, inner liners, labels and document pockets; – safe use of FIBC (including those with inner liners) within different zones defined for explosion endangered environments, described for areas where combustible dusts are, or can be, present (IEC 60079-10-2), and for explosive gas atmospheres (IEC 60079-10-1); – procedures for type qualification and certification of FIBC, including the safe use of inner liners. This third edition cancels and replaces the second edition, published in 2012, and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) in light of experimental evidence, the maximum resistance to ground limit for Type C FIBC, and corresponding resistance limits for inner liners used in Type C FIBC has been increased from 10 M ohms to 100 M ohms; b) the classification of Type L1 inner liners has been revised and extended to include Type L1C inner liners made from multi-layer materials with a conductive internal layer; c) a labelling requirement to include a reference to IEC TS 60079-32-1 for guidance on earthing has been added.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-4-3:2018(Main)
Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear
SIST EN IEC 61340-4-3:2018

IEC 61340-4-3:2017 describes a test method for determining the electrical resistance of footwear (shoes, slippers or booties) used in the control of electrostatic potential on people. This document is suitable for use by the manufacturer of footwear as well as the end user. A method for measuring the electrical resistance of footwear alone is described and serves as a qualification test or an acceptance test for new footwear, or as a periodic test of in-use footwear. Although this document does not include requirements for personal safety, footwear used within the scope of this document in all places of work is regulated by the relevant local statutory requirements regarding the health and safety of all persons. Insulating footwear is not included within the scope of this document although the electrical resistance measurement techniques can be applicable. This edition includes the following significant technical changes with respect to the previous edition: a) classification of footwear as electrostatic conductive or electrostatic dissipative has been removed – classification is not specified; b) environmental classes for laboratory testing have been removed – one set of conditions for pre-conditioning, conditioning and testing is specified; c) reference to IEC 61340-2-3 for measuring the resistance of the counter electrode inserted inside footwear has been removed.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-3:2016(Main)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
SIST EN 61340-2-3:2016

Describes test methods for the determination of the electrical resistance and resistivity of solid materials in the range from 10K Ohm to 1T Ohm used to avoid electrostatic charge accumulation. It takes account of existing IEC/ISO standards and other published information, and gives recommendations and guidelines on the appropriate method.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-4-9:2016(Main)
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments
SIST EN 61340-4-9:2016

IEC 61340-4-9:2016 provides test methods for evaluating the electrical resistance of garments that contain surface conductive or dissipative components or materials used in the electronics industry for the control of electrostatic discharge. This standard defines procedures for measuring electrical resistance, including a system resistance test for garments that provide a ground path for personnel. This edition includes the following significant technical changes with respect to the previous edition: a) classification of three types of garments - static control garments, - groundable static control garments, and - groundable static control garment system; b) additional measurements according to the the garment type including cuff measurements, panel to groundable point, testing with a person in the garment system; c) sleeve to sleeve measurements allowed with probes or by hanging; d) additional recommended values for new garment types as set out in Annex A.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-1:2015(Main)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
SIST EN 61340-2-1:2016

IEC 61340-2-1:2015 describes test methods for measuring the rate of dissipation of static charge of insulating and static dissipative materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and may not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, e.g. textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method may not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. This edition includes the following significant technical changes with respect to the previous edition: a) the first edition supported requirements in IEC TR 61340-5-1, but with the revision of IEC TR 61340-5-1 into an International Standard, this support is no longer required; references to IEC 61340-5-1 have been removed; b) the introduction gives additional information on when charge decay time measurements are appropriate, and the applications for which each of the two test methods are best suited; c) procedures for performance verification of measuring instruments for the corona charging method have been added. IEC 61340-2-1:2015 has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day