EN 50601:2014

SLOVENSKI STANDARD
01-maj-2014
Univerzalni sistemi polaganja kablov - Specifikacija za preskušanje simetričnega
komunikacijskega okabljenja v skladu z EN 50173-4 - Zaslonjene ravne
povezovalne vrvice in ravne vrvice za delovna območja za uporabo v razredu D -
Podrobna specifikacija
Generic cabling systems - Specification for the testing of balanced communication
cabling in accordance with EN 50173-4 - Screened straight patch cords and straight
work area cords for class D applications - Detail specification
Ta slovenski standard je istoveten z: EN 50601:2014
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 50601
NORME EUROPÉENNE
February 2014
EUROPÄISCHE NORM
ICS 33.120.10
English version
Generic cabling systems -
Specification for the testing of balanced communication cabling in
accordance with EN 50173-4 -
Unscreened straight patch cords and straight work area cords for class D
applications -
Detail specification
Systèmes de câblage générique - Anwendungsneutrale
Spécification relative aux essais de Kommunikationsverkabelung -
câblage de télécommunications Spezifikation zur Prüfung der
symétriques selon l’EN 50173-4 – symmetrischen
Cordons droits de brassage et cordons Kommunikationsverkabelung nach
droits de zone de travail non écrantés EN 50173-4 -
pour les applications de classe D - Ungeschirmte gerade Schnüre und
Spécification particulière Geräteanschlusskabel für Anwendungen
der Klasse D -
Bauartspezifikation
This European Standard was approved by CENELEC on 2013-09-23. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50601:2014 E
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Detail specification for unscreened cords for Class D channels .5

– 3 – EN 50601:2014
Foreword
This document (EN 50601:2014) has been prepared by CLC/TC 46X "Communication cables".

The following dates are fixed:

(dop) 2014-09-23
• latest date by which this document has to be
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2016-09-23
conflicting with this document have to
be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.

1 Scope
This detail specification describes patch cords and application-specific cords enabling the construction
of Class D channels as defined in the EN 50173 series of standards.
This detail specification describes cords of which the transmission characteristics are up to 100 MHz
for digital communication. The test configuration is detailed in EN 61935-2.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 50173-4, Information technology  Generic cabling systems  Part 4: Homes
EN 50288-1, Multi-element metallic cables used in analogue and digital communication and control 
Part 1: Generic specification
EN 50288-3-2, Multi-element metallic
...