Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification

IEC corrigendum

Elektrische Doppelschichtkondensatoren zur Verwendung in elektrischen und elektronischen Geräten - Teil 1: Fachgrundspezifikation

Condensateurs électriques fixes à double couche utilisés dans les équipements électriques et électroniques - Partie 1: Spécification générique

Nespremenljivi električni dvoplastni kondenzatorji za električno in elektronsko opremo - 1. del: Rodovna specifikacija - Popravek AC (IEC 62391-1:2015/COR1:2016)

General Information

Status: Withdrawn
Publication Date: 15-Dec-2016

ICS: 31.060.10 - Fixed capacitors

Technical Committee: CLC/TC 40XA - CLC/TC 40XA
Drafting Committee: CLC/TC 40XA - CLC/TC 40XA

Current Stage: 9960 - Withdrawal effective - Withdrawal
Start Date: 24-Nov-2025
Completion Date: 24-Nov-2025

Ref Project: SIST EN 62391-1:2016/AC:2017 - Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification (IEC 62391-1:2015/COR1:2016)

Relations

Replaced By: EN IEC 62391-1:2022 - Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
Effective Date: 29-Nov-2022

Corrects: EN 62391-1:2016 - Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
Effective Date: 13-Dec-2016

EN 62391-1:2016/AC:2017 - Page 3 preview

EN 62391-1:2016/AC:2017 - Page 1 preview

EN 62391-1:2016/AC:2017 - Page 2 preview

Corrigendum

EN 62391-1:2016/AC:2017

English language

3 pages

Preview

e-Library read for

AI-Chat

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 31 31.060 31.060.10

Frequently Asked Questions

What is EN 62391-1:2016/AC:2016-12?

EN 62391-1:2016/AC:2016-12 is a corrigendum published by CLC. Its full title is "Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification". This standard covers: IEC corrigendum

What is the scope of EN 62391-1:2016/AC:2016-12?

IEC corrigendum

What ICS categories does EN 62391-1:2016/AC:2016-12 belong to?

EN 62391-1:2016/AC:2016-12 is classified under the following ICS (International Classification for Standards) categories: 31.060.10 - Fixed capacitors. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to EN 62391-1:2016/AC:2016-12?

EN 62391-1:2016/AC:2016-12 has the following relationships with other standards: It is inter standard links to EN IEC 62391-1:2022, EN 62391-1:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access EN 62391-1:2016/AC:2016-12?

EN 62391-1:2016/AC:2016-12 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

EN 62391-1:2016/AC:2017

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.&25Elektrische Doppelschichtkondensatoren zur Verwendung in elektrischen und elektronischen Geräten - Teil 1: FachgrundspezifikationCondensateurs électriques fixes à double couche utilisés dans les équipements électriques et électroniques - Partie 1: Spécification génériqueFixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification (IEC 62391-1:2015/COR1:2016)31.060.10Fiksni kondenzatorjiFixed capacitorsICS:Ta slovenski standard je istoveten z:EN 62391-1:2016/AC:2016-12SIST EN 62391-1:2016/AC:2017en01-februar-2017SIST EN 62391-1:2016/AC:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 62391-1:2016/AC:2016-12
December 2016
ICS 31.060.10 English Version
Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification (IEC 62391-1:2015/COR1:2016)
Condensateurs électriques fixes à double couche utilisés dans les équipements électriques et électroniques - Partie 1: Spécification générique (IEC 62391-1:2015/COR1:2016)
Elektrische Doppelschichtkondensatoren zur Verwendung in elektrischen und elektronischen Geräten - Teil 1: Fachgrundspezifikation (IEC 62391-1:2015/COR1:2016) This corrigendum becomes effective on 16 December 2016
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

CLC

EN IEC 60384-14-1:2025(Main)

Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ

SIST EN IEC 60384-14-1:2026

IEC 60384-14-1:2025 forms the basis for a uniform procedure for a common international safety mark. It implements the approval schedule for safety tests in IEC 60384‑14, specifies a declaration of design for parameters relevant to safety and indicates conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design. This edition includes the following significant technical changes with respect to the previous edition: a) the tables for dimensions have been replaced with a guidance text in the document; b) the possibility to give the requirements for the service in DC applications and in high humidity conditions have been added; c) the changes in this document in comparison with the previous edition are given in Annex B. This International Standard is to be used in conjunction with IEC 60384‑1 and IEC 60384‑14:2023.

Standard
20 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-14-2:2025(Main)

Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only

SIST EN IEC 60384-14-2:2026

IEC 60384-14-2:2025 forms the basis for a uniform procedure for a common international safety mark. It implements the approval schedule for safety tests in IEC 60384‑14, specifies a declaration of design for parameters relevant to safety and indicates conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design. This edition includes the following significant technical changes with respect to the previous edition: a) the tables for dimensions have been replaced with a guidance text in the document, b) the possibility to give the requirements for the service in DC applications and in high humidity conditions have been added. c) the changes in this document in comparison with the previous edition are given in Annex B. This International Standard is to be used in conjunction with IEC 60384‑1:2021 and IEC 60384‑14:2023.

Standard
18 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-14:2023/A1:2025(Amendment)

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

SIST EN IEC 60384-14:2023/A1:2025

Amendment
7 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 62391-2:2025(Main)

Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application

SIST EN IEC 62391-2:2025

IEC 62391-2:2025 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 and Class 5 of the measurement classification specified in IEC 62391-1:2022. The object of this document is to specify preferred ratings and characteristics and to select from IEC 62391-1:2022 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this document provide specific test severities and requirements of an equal or higher performance level. The definition of power density and its calculating procedure can be found in Annex A. This edition includes the following significant technical changes with respect to the previous edition: a) the document has been completely restructured to comply with the ISO/IEC Directives, Part 2; b) introduction of a new technical categorization for the test methods; c) reorganization of the test methods have been according to these new categories; d) revision of the tables, figures and references according to changes.

Standard
31 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-14:2023/AC:2024-11(Corrigendum)

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

SIST EN IEC 60384-14:2023/AC:2024

Corrigendum
7 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-21:2024(Main)

Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1

SIST EN IEC 60384-21:2024

IEC 60384-21:2024 is applicable to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric with a defined temperature coefficient (dielectric Class 1), intended for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards, or directly onto substrates for hybrid circuits. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384-14. The object of this document is to specify preferred ratings and characteristics and to select from IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification provide specific test severities and requirements of an equal or higher performance level. Further information on the conception of generic, sectional and detail specifications can be found in the Introduction of IEC 60384-1:2021. This edition includes the following significant technical changes with respect to the previous edition: a) the document has been completely restructured to comply with the ISO/IEC Directives, Part 2 and to make it more useable; tables, figures and references have been revised accordingly; Annex X contains all cross-references of changes in clause/subclause numbers; b) the terms have been replaced by the letter symbols in Table 3; c) code of temperature coefficient and tolerance of C0G, U2J have been added in Table 4, Table 6, Table 8, Table 9, Table 11, Table 13, Table 16 and Annex B; d) the requirement in 5.5.2(visual examination) has been repeated in 5.9.3, 5.10.5, 5.11.4, 5.11.4, 5.13.7, 5.14.5 and 5.15.5; e) the deflection D in the very robust designs has been added in 5.9.1; f) Annex B has been changed informative into normative; g) Clause C.5 (Test schedule for quality conformance inspection) has been newly added to withdraw the blank detail specification: IEC 60384-21-1.

Standard
48 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-22:2024(Main)

Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

SIST EN IEC 60384-22:2024

IEC 60384-22:2024 is applicable to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric, Class 2, for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards, or directly onto substrates for hybrid circuits. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384-14. The object of this document is to specify preferred ratings and characteristics and to select from IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification provide specific test severities and requirements of an equal or higher performance level. Further information on the conception of generic, sectional and detail specifications can be found in the Introduction of IEC 60384-1:2021. This edition includes the following significant technical changes with respect to the previous edition: a) The document has been completely restructured to comply with the ISO/IEC Directives, Part 2 and to make it more useable; tables, figures and references have been revised accordingly. b) The requirements of reference temperature 25 °C has been added in Table 5, Table 9, Table 10, Table 12, Table 14 and Table 17. c) The table of temperature characteristics of capacitance for the reference temperature 25 °C have been added in Table C.1, Table C.2 and Table C.3. d) The requirement in 5.5.2 (visual examination) has been repeated in 5.9.3, 5.10.6, 5.11.4, 5.12.6, 5.13.8, 5.14.6 and 5.15.6. e) The deflection D in the very robust designs has been added in 5.9.1. f) Annex C has been changed informative into normative. g) Clause D.5 (Test schedule for quality conformance inspection) has been newly added to withdraw the blank detail specification: IEC 60384-22-1.

Standard
55 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-23:2023(Main)

Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

SIST EN IEC 60384-23:2023

IEC 60384-23:2023 is available as IEC 60384-23:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60384-23:2023 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics, selects from IEC 60384‑1:2021 the appropriate quality assessment procedures, tests and measuring methods and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level. Lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384‑14. This edition includes the following significant technical changes with respect to the previous edition: - this edition includes the following significant technical changes with respect to the previous edition: revision of all parts of the document based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents; - the document structure has been organized to follow new sectional specification structure decided in TC 40; - revised tables and Clause 5 so as to prevent duplications and contradictions; - in Subclause 5.2 (Mounting), the Subclauses 5.2.1, 5.2.2 and 5.2.3 have been added; - in Subclause 5.5 (Shear test), the Subclauses 5.5.1 and 5.5.2 have been added; - in Subclause 5.14 (Component solvent resistance), the Subclauses 5.14.1 and 5.14.2 have been added. In Table 8 and Table A.2, test 5.14 has been moved before 5.7.5 (Final inspections and requirements) in Group 1A and in Subgroup C1; - in Subclause 5.15 (Solvent resistance of marking), the Subclauses 5.15.1 and 5.15.2 have been added; - tangent of loss angle measurement has been added to the resistance to soldering heat test; - lot-by-lot and periodical inspection tables including requirements have been moved to Annex A; - revised Inspection Level (IL) of A1 subgroup.

Standard
40 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-20:2023(Main)

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors

SIST EN IEC 60384-20:2023

IEC 60384-20:2023 is available as IEC 60384-20:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60384-20:2023 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyphenylene sulfide dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics and selects from IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring methods, and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level; lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384‑14. This edition includes the following significant technical changes with respect to the previous edition: - revision of all parts of the document based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents; - the document structure has been organized to follow new sectional specification structure decided in TC 40; - revised tables and Clause 5 so as to prevent duplications and contradictions; - in Clause 5.2 (Mounting), the Subclauses 5.2.1, 5.2.2 and 5.2.3 have been added; - in Subclause 5.5 (Shear test), the Subclauses 5.5.1 and 5.5.2 have been added; - in Subclause 5.14 (Component solvent resistance), the Subclauses 5.14.1 and 5.14.2 have been added. In Table 8 and Table A.2, test 5.14 has been moved before 5.7.5 (Final inspections and requirements) in Group 1A and in Subgroup C1; - in Subclause 5.15 (Solvent resistance of marking), the Subclauses 5.15.1 and 5.15.2 have been added; - tangent of loss angle measurement has been added to resistance to soldering heat test; - lot-by-lot and periodical inspection tables, including requirements, have been moved to Annex A; - revised Inspection Level (IL) of A1 subgroup.

Standard
39 pages
English language
e-Library read for
AI-Chat
1 day

CLC

EN IEC 60384-14:2023(Main)

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

SIST EN IEC 60384-14:2023

IEC 60384-14:2023 applies to capacitors and resistor-capacitor combinations intended to be connected to AC mains or other supply with a nominal voltage not exceeding 1 000 V AC (RMS), and with a nominal frequency not exceeding 100 Hz. This document includes also additional specific conditions and requirements for the connection to DC supplies with a rated voltage not exceeding 1 500 V DC. The principal object of this part of IEC 60384 is to prescribe preferred ratings and characteristics and to select, from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification are of equal or higher performance level; lower performance levels are not permitted. This document also provides a schedule of safety tests to be used by national testing stations in countries where approval by such stations is required. The overvoltage categories in combination with the AC mains voltages for the capacitors classified in this document are to be taken from IEC 60664-1. This edition includes the following significant technical changes with respect to the previous edition:
in damp heat steady state test, all capacitor types are tested both with and without rated voltage; the number of test pieces has been increased;
tangent of loss angle is added In Group 0 tests, in safety tests only;
qualification approval based on safety and performance tests has been removed from the main text to a normative annex;
the range of rated voltages is given instead of exact rated voltage values;
normative annex for description of capacitor styles and of creepage/clearance distance measurement has been added;
the importance of mechanical failures (cracks) in component encapsulation as a safety feature is highlighted in handling instructions and requirements after all relevant tests.

Standard
91 pages
English language
e-Library read for
AI-Chat
1 day

Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification

Elektrische Doppelschichtkondensatoren zur Verwendung in elektrischen und elektronischen Geräten - Teil 1: Fachgrundspezifikation

Condensateurs électriques fixes à double couche utilisés dans les équipements électriques et électroniques - Partie 1: Spécification générique

Nespremenljivi električni dvoplastni kondenzatorji za električno in elektronsko opremo - 1. del: Rodovna specifikacija - Popravek AC (IEC 62391-1:2015/COR1:2016)

General Information

Relations

EN 62391-1:2016/AC:2017

Frequently Asked Questions

Standards Content (Sample)

Questions, Comments and Discussion

This May Also Interest You