EN 60296:2004
(Main)Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
Covers specifications and test methods for unused mineral insulating oils. It applies to oil delivered to the agreed point and time of delivery, intended for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant and for heat transfer. These oils are obtained by distillation and refining of crude petroleum. Oils with and without additives are both within the scope of this standard. This standard is applicable only to unused mineral insulating oils. Reclaimed oils are beyond the scope of this standard. This standard does not apply to mineral oils used as impregnants in cables or capacitors. NOTE Mineral insulating oils complying with the requirements of this standard, of the same class and containing no additives (see 3.4), are considered to be compatible with one another and can be mixed in any proportion. This does not apply to oils containing additives. Where the user wishes to mix such oils, a check is recommended to be made to ensure that the mixture meets the requirements of this standard. Main changes with regard to previous edition include: the three classes of previous edition have been replaced by only two: transformer oil and low temperature switchgear oil, but a new concept, the lowest cold start energizing temperature, has been included; new properties have been added (i.e. charging tendency); values for properties have been revised.
Flüssigkeiten für elektrotechnische Anwendungen - Neue Isolieröle für Transformatoren und Schaltgeräte
Fluides pour applications électrotechniques - Huiles minérales isolantes neuves pour transformateurs et appareillages de connexion
Concerne les spécifications et méthodes d'essais des huiles minérales isolantes neuves. Elle s'applique à l'huile livrée en lieu et temps convenus, destinée à l'utilisation dans les transformateurs, interrupteurs et matériels électriques semblables où l'huile est nécessaire comme fluide isolant et caloporteur. Ces huiles proviennent de la distillation et du raffinage de pétrole brut. Cette norme s'applique aux huiles avec ou sans additifs. Cette norme ne s'applique qu'aux huiles minérales isolantes neuves. Les huiles régénérées sont hors du champ de cette norme. Cette norme ne concerne pas les huiles minérales utilisées pour imprégner les câbles ou les condensateurs. NOTE Les huiles minérales isolantes satisfaisant aux exigences de cette norme, de même classe et sans additifs (voir 3.4), sont considérées comme mutuellement compatibles et miscibles en toute proportion. Cela ne s'applique pas aux huiles additivées. Lorsque l'utilisateur souhaite mélanger de telles huiles, une vérification est recommandée pour s'assurer de la conformité du mélange à cette norme. Les principales modifications par rapport à l'édition précédente concernent les trois classes qui ont été remplacées par deux classes seulement: huile pour transformateur et huile pour appareillage de connexion basse température. Un nouveau concept, la température minimale de démarrage en puissance, a été introduit; de nouvelles propriétés ont été ajoutées (par exemple la tendance à la charge); et les valeurs concernant les propriétés ont été révisées.
Tekočine za elektrotehniko – Nerabljena mineralna izolacijska olja za transformatorje in omrežne stikalne naprave (IEC 60296:2003)
General Information
- Status
- Withdrawn
- Publication Date
- 28-Apr-2004
- Withdrawal Date
- 31-Mar-2007
- Technical Committee
- CLC/SR 10 - Fluids for electrotechnical applications
- Drafting Committee
- IEC/TC 10 - IEC_TC_10
- Parallel Committee
- IEC/TC 10 - IEC_TC_10
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Mar-2015
- Completion Date
- 26-Mar-2015
Relations
- Effective Date
- 28-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60296:2004 is a standard published by CLC. Its full title is "Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear". This standard covers: Covers specifications and test methods for unused mineral insulating oils. It applies to oil delivered to the agreed point and time of delivery, intended for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant and for heat transfer. These oils are obtained by distillation and refining of crude petroleum. Oils with and without additives are both within the scope of this standard. This standard is applicable only to unused mineral insulating oils. Reclaimed oils are beyond the scope of this standard. This standard does not apply to mineral oils used as impregnants in cables or capacitors. NOTE Mineral insulating oils complying with the requirements of this standard, of the same class and containing no additives (see 3.4), are considered to be compatible with one another and can be mixed in any proportion. This does not apply to oils containing additives. Where the user wishes to mix such oils, a check is recommended to be made to ensure that the mixture meets the requirements of this standard. Main changes with regard to previous edition include: the three classes of previous edition have been replaced by only two: transformer oil and low temperature switchgear oil, but a new concept, the lowest cold start energizing temperature, has been included; new properties have been added (i.e. charging tendency); values for properties have been revised.
Covers specifications and test methods for unused mineral insulating oils. It applies to oil delivered to the agreed point and time of delivery, intended for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant and for heat transfer. These oils are obtained by distillation and refining of crude petroleum. Oils with and without additives are both within the scope of this standard. This standard is applicable only to unused mineral insulating oils. Reclaimed oils are beyond the scope of this standard. This standard does not apply to mineral oils used as impregnants in cables or capacitors. NOTE Mineral insulating oils complying with the requirements of this standard, of the same class and containing no additives (see 3.4), are considered to be compatible with one another and can be mixed in any proportion. This does not apply to oils containing additives. Where the user wishes to mix such oils, a check is recommended to be made to ensure that the mixture meets the requirements of this standard. Main changes with regard to previous edition include: the three classes of previous edition have been replaced by only two: transformer oil and low temperature switchgear oil, but a new concept, the lowest cold start energizing temperature, has been included; new properties have been added (i.e. charging tendency); values for properties have been revised.
EN 60296:2004 is classified under the following ICS (International Classification for Standards) categories: 29.040.10 - Insulating oils; 29.130 - Switchgear and controlgear; 29.180 - Transformers. Reactors. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60296:2004 has the following relationships with other standards: It is inter standard links to EN 60296:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60296:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI SIST EN 60296:2005
STANDARD
december 2005
Tekočine za elektrotehniko – Nerabljena mineralna izolacijska olja za
transformatorje in omrežne stikalne naprave (IEC 60296:2003)
Fluids for electrotechnical applications - Unused mineral insulating oils for
transformers and sw
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...