EN 62612:2013/A1:2017
(Amendment)Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
2017-06-08: Final decision is to publish A1 and A11 separately the same day. A1 is identical to IEC A1.
2017-05-31: D156/039: to be published
2017-05-04: Publication on the hold pending TC 34A reply about A11 (pr=58955)
2015-11-18 - CLC/TC 34A request that A1 is published together with the European Amendment A11 (WI 58955).
LED-Lampen mit eingebautem Vorschaltgerät für Allgemeinbeleuchtung mit Versorgungsspannungen > 50 V - Anforderungen an die Arbeitsweise
Lampes à LED autoballastées pour l'éclairage général avec des tensions d'alimentation > 50 V - Exigences de performances
LED-sijalke za splošno razsvetljavo z vgrajeno predstikalno napravo pri napajalni napetosti nad 50 V - Tehnične zahteve - Dopolnilo A1 (IEC 62612:2013/A1:2015)
General Information
- Status
- Published
- Publication Date
- 29-Jun-2017
- Withdrawal Date
- 29-Jun-2020
- Technical Committee
- CLC/TC 34 - 'Lamps and related equipment
- Drafting Committee
- IEC/SC 34A - IEC_SC_34A
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 30-Jun-2017
- Completion Date
- 30-Jun-2017
Relations
- Effective Date
- 03-Feb-2015
- Effective Date
- 28-Jul-2015
Overview
EN 62612:2013/A1:2017 (identical to IEC 62612:2013/A1:2015) specifies performance requirements for self‑ballasted LED lamps for general lighting services with supply voltages > 50 V. Published by CENELEC as a European amendment, this standard updates EN 62612:2013 and clarifies expected operating and test conditions, stabilization procedures and preferred luminous flux categories. It is intended to support conformity assessment and harmonize performance claims for LED lamps used in general lighting.
Key topics and technical requirements
- Scope and expected operation: Lamps complying with the standard are expected to start and operate satisfactorily at 92% to 106% of rated supply voltage, at ambient temperatures between –20 °C and 40 °C, and when installed in luminaires that comply with IEC 60598‑1.
- Claims for other conditions: If a supplier claims suitability outside these conditions (e.g., higher voltage, temperature or humidity), the lamps must be tested under those claimed conditions, operate satisfactorily, and meet the supplier’s performance claims.
- Luminous flux categories: For non‑directional LED lamps, the standard recommends preferred rated luminous flux values: 100 lm, 150 lm, 250 lm, 350 lm, 500 lm, 800 lm, 1000 lm, 1500 lm, 2000 lm, 3000 lm - facilitating consistent product categorization and labeling.
- Stabilization and measurement procedure (A.1):
- During stabilization, measure luminous flux/intensity and electrical power at least every 1 minute.
- An LED lamp shall be operated at least 30 minutes and is considered stable if, over the last 15 minutes, the relative difference between maximum and minimum readings of light output and electrical power is less than 0.5% of the minimum reading.
- Pre‑burning (prior operation) can be used to reduce stabilization time; pre‑burned lamps meeting the 15‑minute criterion do not require the full 30‑minute run.
- If large fluctuations persist beyond 45 minutes, measurements may start and fluctuations must be reported; however, if a slow downward drift continues, wait until stabilization criteria are met.
- Bibliography: Adds reference to JIS C 8158:2012 (self‑ballasted LED lamps by voltage > 50 V).
Applications and users
This standard is used by:
- LED lamp manufacturers for product design, testing and performance claims
- Testing laboratories and certification bodies performing compliance testing
- Lighting specifiers, procurement teams and OEMs requiring verified lamp performance
- Regulatory and compliance engineers referencing CENELEC/IEC alignment for market access in Europe
Related standards
- IEC 62612 (base international standard)
- IEC 60598‑1 (luminaires - referenced for luminaire conditions)
- JIS C 8158:2012 (related national standard cited in bibliography)
Keywords: EN 62612, IEC 62612, self‑ballasted LED lamps, performance requirements, luminous flux categories, LED lamp testing, stabilization, supply voltages > 50 V, CENELEC.
Frequently Asked Questions
EN 62612:2013/A1:2017 is a amendment published by CLC. Its full title is "Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements". This standard covers: 2017-06-08: Final decision is to publish A1 and A11 separately the same day. A1 is identical to IEC A1. 2017-05-31: D156/039: to be published 2017-05-04: Publication on the hold pending TC 34A reply about A11 (pr=58955) 2015-11-18 - CLC/TC 34A request that A1 is published together with the European Amendment A11 (WI 58955).
2017-06-08: Final decision is to publish A1 and A11 separately the same day. A1 is identical to IEC A1. 2017-05-31: D156/039: to be published 2017-05-04: Publication on the hold pending TC 34A reply about A11 (pr=58955) 2015-11-18 - CLC/TC 34A request that A1 is published together with the European Amendment A11 (WI 58955).
EN 62612:2013/A1:2017 is classified under the following ICS (International Classification for Standards) categories: 29.140.01 - Lamps in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 62612:2013/A1:2017 has the following relationships with other standards: It is inter standard links to EN 62612:2013, EN 62612:2013/A11:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 62612:2013/A1:2017 is associated with the following European legislation: EU Directives/Regulations: 1194/2012, 2009/125/EC, 2010/30/EU, 244/2009, 874/2012; Standardization Mandates: M/495. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 62612:2013/A1:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2017
/('VLMDONH]DVSORãQRUD]VYHWOMDYR]YJUDMHQRSUHGVWLNDOQRQDSUDYRSULQDSDMDOQL
QDSHWRVWLQDG97HKQLþQH]DKWHYH'RSROQLOR$ ,(& $
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V -
Performance requirements (IEC 62612:2013/A1:2015)
Ta slovenski standard je istoveten z: EN 62612:2013/A1:2017
ICS:
29.140.01 Žarnice na splošno Lamps in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62612:2013/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2017
ICS 29.140.01
English Version
Self-ballasted LED lamps for general lighting services
with supply voltages > 50 V -
Performance requirements
(IEC 62612:2013/A1:2015)
Lampes à LED autoballastées pour l'éclairage général LED-Lampen mit eingebautem Vorschaltgerät für
avec des tensions d'alimentation > 50 V - Allgemeinbeleuchtung mit Versorgungsspannungen > 50 V -
Exigences de performances Anforderungen an die Arbeitsweise
(IEC 62612:2013/A1:2015) (IEC 62612:2013/A1:2015)
This amendment A1 modifies the European Standard EN 62612:2013; it was approved by CENELEC on 2015-12-02. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62612:2013/A1:2017 E
European foreword
The text of document 34A/1824/CDV, future IEC 62612:2013/A1, prepared by SC 34A "Lamps", of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62612:2013/A1:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-12-30
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-06-30
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annexes ZZA, ZZB and ZZC, included in
EN 62612:2013/A11:2017.
Endorsement notice
The text of the International Standard IEC 62612:2013/A1:2015 was approved by CENELEC as a
European Standard without any modification.
IEC 62612 ®
Edition 1.0 2015-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Self-ballasted LED lamps for general lighting services with supply voltages
> 50 V – Performance requirements
Lampes à LED autoballastées pour l'éclairage général avec des tensions
d'alimentation > 50 V – Exigences de performances
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...