EN 60745-2-20:2003/A1:2009

SLOVENSKI STANDARD
01-september-2009
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DWUDþQHåDJH,(&
$
Hand-held motor-operated electric tools - Safety -- Part 2-20: Particular requirements for
band saws
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-20: Besondere
Anforderungen für Bandsägen
Outils électroportatifs à moteur - Sécurité -- Partie 2-20: Règles particulières pour les
scies à ruban
Ta slovenski standard je istoveten z: EN 60745-2-20:2003/A1:2009
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60745-2-20/A1
NORME EUROPÉENNE
May 2009
EUROPÄISCHE NORM
ICS 25.140.20
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-20: Particular requirements for band saws
(IEC 60745-2-20:2003/A1:2008)
Outils électroportatifs à moteur - Handgeführte motorbetriebene

Sécurité - Elektrowerkzeuge -
Partie 2-20: Règles particulières Sicherheit -
pour les scies à ruban Teil 2-20: Besondere Anforderungen
(CEI 60745-2-20:2003/A1:2008) für Bandsägen
(IEC 60745-2-20:2003/A1:2008)
This amendment A1 modifies the European Standard EN 60745-2-20:2003; it was approved by CENELEC on
2009-04-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-20:2003/A1:2009 E

Foreword
The text of document 61F/738/FDIS future amendment 1 to IEC 60745-2-20:2003, prepared by SC 61F
(transformed into TC 116, Safety of hand-held motor-operated electric tools), was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60745-2-20:2003
on 2009-04-22.
With this amendment, this Part 2 is established on the basis of EN 60745-1:2006.
Main changes include editorial modifications to match with EN 60745-1:2006 and clarifications in
Annex K.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2010-02-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-05-01
__________
Endorsement notice
The text of amendment 1:2008 to the I
...