EN 62841-3-12:2019/A11:2026

SLOVENSKI STANDARD
01-oktober-2026
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-
12. del: Posebne zahteve za prenosne rezalnike navojev - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-12: Particular requirements for transportable threading
machines
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen – Sicherheit - Teil 3-12: Besondere Anforderungen für
transportable Gewindeschneidmaschinen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-12: Exigences particulières relatives aux machines à fileter portables
Ta slovenski standard je istoveten z: EN 62841-3-12:2019/A11:2026
ICS:
25.100.50 Navojna rezalna orodja Taps and threading dies
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62841-3-12:2019/A11

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2026
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-12: Particular
requirements for transportable threading machines
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-12: Exigences transportable Werkzeuge und Rasen- und
particulières relatives aux machines à fileter portables Gartenmaschinen - Sicherheit - Teil 3-12: Besondere
Anforderungen für transportable
Gewindeschneidmaschinen
This amendment A11 modifies the European Standard EN 62841-3-12:2019; it was approved by CENELEC on 2024-07-08. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-12:2019/A11:2026 E

Contents Page
1 Modification to Clause 2, “Normative references” . 4
2 Modification to Clause 3, “Terms and definitions” . 4
3 Modification to Clause 11, “Input and current” . 4
4 Modification to Clause 24, “Supply connection and external flexible cords” . 4
5 Replacement of Annex ZA, “Normative references to international publications with
their corresponding European publications” . 5
6 Replacement of Annex ZZ, “Relationship between this European Standard and the
essential requirements of Directive 2006/42/EC [2006 OJ L157] aimed to be covered” . 5
European foreword
This document (EN 62841-3-12:2019/A11:2026) has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2027-08-31
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2030-08-31
conflicting with this document have to be
withdrawn
This document amends EN 62841-3-12:2019/A1:2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Mem
...