Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to determine the capacitance between conductive elements of connectors.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 22-1: Prüfungen der Kapazität - Prüfung 22a: Kapazität

Connecteurs pour équipements électroniques - Essais et mesures - Partie 22-1: Essais de capacité - Essai 22a: Capacité

La présente partie de la CEI 60512 est utilisée pour les essais des connecteurs du domaine d’activité du comité d’études 48, lorsque la spécification particulière l’exige. Elle peut également être utilisée pour des dispositifs similaires lorsqu’une spécification particulière le stipule. L’objet de cette norme est de définir une méthode d’essai normalisée pour déterminer la capacité entre les éléments conducteurs de connecteurs.

Konektorji za elektronsko opremo - Preskusi in meritve - 22-1. del: Preskušanje kapacitivnosti - Preskus 22a: Kapacitivnost (IEC 60512-22-1:2010)

Ta del IEC 60512, kadar ga zahteva podrobna specifikacija, se uporablja za preskušanje konektorjev v okviru tehničnega odbora 48. Lahko se uporablja tudi za podobne naprave, kadar ga določa podrobna specifikacija. Cilj tega standarda je podrobno opredeliti standardno preskusno metodo za določevanje kapacitivnosti med prevodnimi elementi konektorjev.

General Information

Status
Published
Publication Date
08-Jul-2010
Withdrawal Date
30-Jun-2013
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
09-Jul-2010
Completion Date
09-Jul-2010

Buy Standard

Standard
EN 60512-22-1:2010
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2010
Konektorji za elektronsko opremo - Preskusi in meritve - 22-1. del: Preskušanje
kapacitivnosti - Preskus 22a: Kapacitivnost (IEC 60512-22-1:2010)
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance
tests - Test 22a: Capacitance (IEC 60512-22-1:2010)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 22-1:
Prüfungen der Kapazität - Prüfung 22a: Kapazität (IEC 60512-22-1:2010)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 22-1: Essais
de capacité - Essai 22a: Capacité (CEI 60512-22-1:2010)
Ta slovenski standard je istoveten z: EN 60512-22-1:2010
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60512-22-1
NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM
ICS 31.220.01
English version
Connectors for electronic equipment -
Tests and measurements -
Part 22-1: Capacitance tests -
Test 22a: Capacitance
(IEC 60512-22-1:2010)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 22-1: Essais de capacité - Teil 22-1: Prüfungen der Kapazität -
Essai 22a: Capacité Prüfung 22a: Kapazität
(CEI 60512-22-1:2010) (IEC 60512-22-1:2010)

This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-22-1:2010 E
Foreword
The text of document 48B/2158/FDIS, future edition 1 of IEC 60512-22-1, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-22-1 on 2010-07-01.
The structure of EN 60512 series is explained in EN 60512-1-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-07-01
with the EN have to be withdrawn
__________
Endorsement notice
The text of the International Standard IEC 60512-22-1:2010 was approved by CENELEC as a European
Standard without any modification.
__________
IEC 60512-22-1 ®
Edition 1.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Tests and measurements –
Part 22-1: Capacitance tests – Test 22a: Capacitance

Connecteurs pour équipements électroniques – Essais et mesures –
Partie 22-1: Essais de capacité – Essai 22a: Capacité

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 31.220.01 ISBN 978-2-88910-958-6
– 2 – 60512-22-1 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 22-1: Capacitance tests –
Test 22a: Capacitance
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.