EN 62271-102:2002/A2:2013

SLOVENSKI STANDARD
01-julij-2013
9LVRNRQDSHWRVWQHVWLNDOQHLQNUPLOQHQDSUDYHGHO/RþLOQDVWLNDOD]D
L]PHQLþQLWRNLQR]HPOMLWYHQDVWLNDOD,(&$
High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors
and earthing switches (IEC 62271-102:2001/A2:2013)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 102: Wechselstrom-
Trennschalter und -Erdungsschalter (IEC 62271-102:2001/A2:2013)
Appareillage à haute tension - Partie 102: Sectionneurs et sectionneurs de terre à
courant alternatif (CEI 62271-102:2001/A2:2013)
Ta slovenski standard je istoveten z: EN 62271-102:2002/A2:2013
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62271-102/A2
NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM
ICS 29.130.10; 29.130.99
English version
High-voltage switchgear and controlgear -
Part 102: Alternating current disconnectors and earthing switches
(IEC 62271-102:2001/A2:2013)
Appareillage à haute tension -  Hochspannungs-Schaltgeräte und -
Partie 102: Sectionneurs et sectionneurs Schaltanlagen -
de terre à courant alternatif Teil 102: Wechselstrom-Trennschalter
(CEI 62271-102:2001/A2:2013) und -Erdungsschalter
(IEC 62271-102:2001/A2:2013)
This amendment A2 modifies the European Standard EN 62271-102:2002; it was approved by CENELEC on
2013-03-21. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62271-102:2002/A2:2013 E

Foreword
The text of document 17A/1029/FDIS, future edition 1 of IEC 62271-102:2001/A2, prepared by SC 17A,
"High-voltage switchgear and controlgear", of IEC TC 17, "Switchgear and controlgear" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-102:2002/A2:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-21
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-03-21
• latest date by which the national
standards conflicting with the

document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62271-102:2001/A2:2013 was approved by CENELEC as a
European Standard without any modification.

IEC 62271-102 ®
Edition 1.0 2013-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 2
AMENDEMENT 2
High-voltage switchgear and controlgear –

Part 102: Alternating current disconnectors and earthing switches

Appareillage à haute tension –

Partie 102: Sectionneurs et sectionneurs de terre à courant alternatif

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 29.130.10; 29.130.99 ISBN 978-2-83220-611-9

– 2 – 62271-102 Amend. 2 © IEC:2013
FOREWORD
This amendment has been prepared by subcommittee 17A: High-voltage switchgear and
controlgear, of IEC technical committee 17: Switchgear and controlgear.
The text of this amendment is based on the following documents:
FDIS Report on voting
17A/1029/FDIS 17A/1035/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
_____________
62271-102 Amend. 2 © IEC:2013 – 3 –
Table 1 – Recommended contact zones for "fixed" contacts supported by flexible
conductors
Add the following new lines to the existing Table 1:
800 250 650 450 550
1 100 300 700 500 600
1 200 300 700 500 600
Table 2 – Recommended contact zones for "fixed" contacts supported by rigid
conductors
Add the following new lines to the existing Table 2:
1 100 250 250 250
1 200 250 250 250
Table 3 – Recommended static mechanical terminal loads
Add the following new lines to the existing Table 3:
≤ 4 000 2 000 660 4 000 1 600
1 100 – 1 200 2 000
2 500 1 000 5 000 2 000
> 4 000
Table 5 – Power frequency 1 min withstand voltages
Add the following new lines to the existing Table 5:
1 100 1 270 -
1 200 1 386 -
Figure 4 – Single-phase test arrangement for disconnectors with a horizontal isolating
distance and for earthing switches with rated voltage of 52 kV and above
Replace the existing Figure 4 by the following new figure:

– 4 – 62271-102 Amend. 2 © IEC:2013

a) Test arrangement for disconnectors rated 52 kV to 550 kV

b) Test arrangement for disconnectors rated above 550 kV
Key
l minimum centre-to-centre distance between adjacent poles, as stated by the manufacturer
Figure 4 – Single-phase test arrangement for disconnectors with a horizontal isolating
distance and for earthing switches with rated voltage of 52 kV and above
Figure 5 – Single-phase test arrangement for divided support disconnectors (earthing
switches) with a vertical isolating distance with rated voltages of 52 kV and above to be
used with flexible conductors
Replace the existing Figu
...