EN IEC 61400-1:2019

SLOVENSKI STANDARD
01-junij-2019
Nadomešča:
SIST EN 61400-1:2006
SIST EN 61400-1:2006/A1:2011
Sistemi za proizvodnjo energije na veter - 1. del: Zahteve za načrtovanje (IEC
61400-1:2019)
Wind energy generation systems - Part 1: Design requirements (IEC 61400-1:2019)
Windenergieanlagen - Teil 1: Auslegungsanforderungen (IEC 61400-1:2019)
Systèmes de génération d'énergie éolienne - Partie 1: Exigences de conception (IEC
61400-1:2019)
Ta slovenski standard je istoveten z: EN IEC 61400-1:2019
ICS:
27.180 Vetrne elektrarne Wind turbine energy systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61400-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2019
ICS 27.180 Supersedes EN 61400-1:2005
English Version
Wind energy generation systems - Part 1: Design requirements
(IEC 61400-1:2019)
Systèmes de génération d'énergie éolienne - Partie 1: Windenergieanlagen - Teil 1: Auslegungsanforderungen
Exigences de conception (IEC 61400-1:2019)
(IEC 61400-1:2019)
This European Standard was approved by CENELEC on 2019-03-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61400-1:2019 E

European foreword
The text of document 88/696/FDIS, future edition 4 of IEC 61400-1, prepared by IEC/TC 88 "Wind
energy generation systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61400-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-12-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-03-15
document have to be withdrawn
This document supersedes EN 61400-1:2005.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61400-1:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60146 (series) NOTE Harmonized as EN 60146 (series)
IEC 60269 (series) NOTE Harmonized as EN 60269 (series)
IEC 60898 (series) NOTE Harmonized as EN 60898 (series)
IEC 61000-6-1 NOTE Harmonized as EN IEC 61000-6-1
IEC 61000-6-4 NOTE Harmonized as EN 61000-6-4
IEC 61310-1:2007 NOTE Harmonized as EN 61310-1:2008 (not modified)
IEC 61310-2:2007 NOTE Harmonized as EN 61310-2:2008 (not modified)
IEC 61400-2 NOTE Harmonized as EN 61400-2
1 2
IEC 61400-3-1 NOTE Harmonized as EN IEC 61400-3-1
3 4
IEC 61400-6 NOTE Harmonized as EN IEC 61400-6

To be published. Stage at time of publication: IEC CDV 61400-3-1:2017
To be published. Stage at time of publication: FprEN IEC 61400-3-1:2018
To be published. Stage at time of publication: IEC CDV 61400-6:2017
To be published. Stage at time of publication: pr EN IEC 61400-6:2017
IEC 61400-12-1 NOTE Harmonized as EN 61400-12-1
IEC 61400-13 NOTE Harmonized as EN 61400-13
IEC 61400-21 NOTE Harmonized as EN 61400-21
IEC 61508 (series) NOTE Harmonized as EN 61508 (series)
IEC 61508-1:2010 NOTE Harmonized as EN 61508-1:2010 (not modified)
IEC 61508-6 NOTE Harmonized as EN 61508-6
IEC 62061:2005 NOTE Harmonized as EN 62061:2005 (not modified)
IEC 62061:2005/AMD1:2012 NOTE Harmonized as EN 62061:2005/A1:2013 (not modified)
IEC 62061:2005/AMD2:2015 NOTE Harmonized as EN 62061:2005/A2:2015 (not modified)
IEC 62305-1 NOTE Harmonized as EN 62305-1
ISO 12100:2010 NOTE Harmonized as EN ISO 12100:2010 (not modified)
ISO 9001 NOTE Harmonized as EN ISO 9001
ISO 13849-2 NOTE Harmonized as EN ISO 13849-2

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60034 series Rotating electrical machines - series
IEC 60038 -  IEC standard voltages EN 60038 -
IEC 60071-1 -  Insulation co-ordination - Part 1: EN 60071-1 -
Definitions, principles and rules
IEC 60071-2 -  Insulation co-ordination - Part 2: EN IEC 60071-2 -
Application guidelines
IEC 60076 series Power transformers EN 60076 series
IEC 60204-1 -  Safety of machinery - Electrical equipment EN 60204-1 -
of machines - Part 1: General requirements
IEC 60204-11 2000 Safety of machinery - Electrical equipment EN 60204-11 2000
of machines - Part 11: Requirements for
HV equipment for voltages above 1 000 V
a.c. or 1 500 V d.c. and not exceeding 36
kV
- -  + corrigendum 2010
Feb.
IEC 60364 series Low-voltage electrical installations HD 60364 series
IEC 60529 -  Degrees of protection provided by - -
enclosures (IP Code)
IEC 60664-1 -  Insulation coordination for equipment EN 60664-1 -
within low-voltage systems - Part 1:
Principles, requirements and tests
IEC 60664-3 -  Insulation coordination for equipment EN 60664-3 -
within low-voltage systems - Part 3: Use of
coating, potting or moulding for protection
against pollution
IEC 60721 series Classification of environmental conditions - EN 60721 series
IEC 61000-6-2 -  Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-2 -
6-2: Generic standards - Immunity
standard for industrial environments
Publication Year Title EN/HD Year
IEC 61400-3 -  Wind turbines - Part 3: Design EN 61400-3 -
requirements for offshore wind turbines
IEC 61400-4 -  Wind turbines - Part 4: Design EN 61400-4 -
requirements for wind turbine gearboxes
IEC 61400-24 -  Wind turbines - Part 24: Lightning EN 61400-24 -
protection
IEC 61439 series Low-voltage switchgear and controlgear EN 61439 series
assemblies
IEC 61800-4 -  Adjustable speed electrical power drive EN 61800-4 -
systems - Part 4: General requirements -
Rating specifications for a.c. power drive
systems above 1 000 V a.c. and not
exceeding 35 kV
IEC 61800-5-1 -  Adjustable speed electrical power drive EN 61800-5-1 -
systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
IEC 62271 series High-voltage switchgear and controlgear EN 62271 series
IEC 62305-3 -  Protection against lightning - Part 3: EN 62305-3 -
Physical damage to structures and life
hazard
IEC 62305-4 -  Protection against lightning - Part 4: EN 62305-4 -
Electrical and electronic systems within
structures
IEC 62477-1 2012 Safety requirements for power electronic EN 62477-1 2012
converter systems and equipment - Part 1:
General
- -  + A11 2014
ISO 76 -  Rolling bearings - Static load ratings - -
ISO 281 -  Rolling bearings - Dynamic load ratings - -
and rating life
ISO 2394 -  General principles on reliability for - -
structures
ISO 2533 -  Standard Atmosphere - -
ISO 4354 -  Wind actions on structures - -
ISO 6336-2 -  Calculation of load capacity of spur and - -
helical gears – Part 2: Calculation of
surface durability (pitting)
ISO 6336-3 2006 Calculation of load capacity of spur and - -
helical gears – Part 3: Calculation of tooth
bending strength
ISO 12494 2001 Atmospheric icing of structures - -
ISO 13850 -  Safety of machinery - Emergency stop EN ISO 13850 -
function - Principles for design
ISO/TS 16281 -  Rolling bearings -- Methods for calculating - -
the modified reference rating life for
universally loaded bearings
IEC 61400-1 ®
Edition 4.0 2019-02
INTERNATIONAL
STANDARD
colour
inside
Wind energy generation systems –

Part 1: Design requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.180 ISBN 978-2-8322-6253-5

– 2 – IEC 61400-1:2019 © IEC 2019
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms and definitions . 15
4 Symbols and abbreviated terms . 23
4.1 Symbols and units. 23
4.2 Abbreviated terms . 26
5 Principal elements . 27
5.1 General . 27
5.2 Design methods . 27
5.3 Safety classes . 27
5.4 Quality assurance . 27
5.5 Wind turbine markings . 27
6 External conditions . 28
6.1 General . 28
6.2 Wind turbine classes . 28
6.3 Wind conditions . 30
6.3.1 General . 30
6.3.2 Normal wind conditions . 31
6.3.3 Extreme wind conditions . 33
6.4 Other environmental conditions . 38
6.4.1 General . 38
6.4.2 Normal other environmental conditions . 39
6.4.3 Extreme other environmental conditions . 39
6.5 Electrical power network conditions . 39
7 Structural design . 40
7.1 General . 40
7.2 Design methodology . 40
7.3 Loads. 40
7.3.1 General . 40
7.3.2 Gra
...