EN IEC 63182-4:2022

SLOVENSKI STANDARD
01-marec-2022
Jedra iz magnetnega prahu - Smernice o merah in mejnih vrednostih površinskih
nepravilnosti - 4. del: Blokovna jedra
Magnetic powder cores - guidelines on dimensions and the limits of surface irregularities
- Part 4: Block-cores
Noyaux en poudre magnétique - Lignes directrices concernant les dimensions et les
limites des irrégularités de surface - Partie 4: Noyaux en blocs
Ta slovenski standard je istoveten z: EN IEC 63182-4:2022
ICS:
29.100.10 Magnetne komponente Magnetic components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63182-4

NORME EUROPÉENNE
EUROPÄISCHE NORM January 2022
ICS 29.100.10
English Version
Magnetic powder cores - Guidelines on dimensions and the
limits of surface irregularities - Part 4: Block-cores
(IEC 63182-4:2021)
Noyaux en poudre magnétique - Lignes directrices Magnetpulverkerne - Richtlinien zu Maßen und Grenzen
concernant les dimensions et les limites des irrégularités de von Oberflächenbeschädigungen - Teil 4: Blockkerne
surface - Partie 4: Noyaux en blocs (IEC 63182-4:2021)
(IEC 63182-4:2021)
This European Standard was approved by CENELEC on 2022-01-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63182-4:2022 E

European foreword
The text of document 51/1373/CDV, future edition 1 of IEC 63182-4, prepared by IEC/TC 51
"Magnetic components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 63182-4:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-10-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-01-03
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63182-4:2021 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 63182-1 - Magnetic powder cores - Guidelines on EN IEC 63182-1 -
dimensions and the limits of surface
irregularities - Part 1: General specification

IEC 63182-4 ®
Edition 1.0 2021-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Magnetic powder cores – Guidelines on dimensions and the limits of surface

irregularities –
Part 4: Block-cores
Noyaux en poudre magnétique – Lignes directrices concernant les dimensions

et les limites des irrégularités de surface –

Partie 4: Noyaux en blocs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.100.10 ISBN 978-2-8322-1054-9

– 2 – IEC 63182-4:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Primary dimensions . 5
5 Limits of surface irregularities . 6
5.1 Definition of surface irregularities . 6
5.2 Examples of surface irregularities . 7
5.3 Chips and ragged edges . 7
5.3.1 General . 7
5.3.2 Chips . 7
5.3.3 Ragged edges . 7
5.4 Cracks . 7
5.5 Flash . 7
5.6 Rust . 8
5.7 Discoloration . 8
Annex A (normative) Derived standards . 9

Figure 1 – Main dimensions of block-cores . 6
Figure 2 – Examples of surface irregularities . 7

Table 1 – Main dimensions of block-cores. 6

IEC 63182-4:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MAGNETIC POWDER CORES – GUIDELINES ON DIMENSIONS
AND THE LIMITS OF SURFACE IRREGULARITIES –

Part 4: Block-cores
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommend
...