EN 50291-2:2010/prAA:2015
(Amendment)Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
To correct the EMC levels in EN 50291-2:2010
Elektrische Geräte für die Detektion von Kohlenmonoxid in Wohnhäusern - Teil 2: Ortsfeste elektrische Geräte zum kontinuierlichen Betrieb in Freizeitfahrzeugen und ähnlichen Umgebungen einschließlich Sportbooten - Ergänzende Prüfverfahren und Anforderungen an das Betriebsverhalten
Appareils électriques pour la détection de monoxyde de carbone dans les locaux à usage domestique - Partie 2: Appareils électriques en fonctionnement continu et en installation fixe dans les véhicules de loisir et locaux similaires incluant les embarcations de loisir - Méthodes d'essai supplémentaires et exigences d'aptitude à la fonction
Električne naprave za odkrivanje ogljikovega monoksida v gospodinjstvih - 2. del: Električne naprave za stalno delovanje v nepremičnih inštalacijah na rekreacijskih vozilih in na sorodnih področjih, vključno na rekreacijskih plovilih - Dodatne preskusne metode in zahtevane lastnosti - Dopolnilo AA
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2016
(OHNWULþQHQDSUDYH]DRGNULYDQMHRJOMLNRYHJDPRQRNVLGDYJRVSRGLQMVWYLKGHO
(OHNWULþQHQDSUDYH]DVWDOQRGHORYDQMHYQHSUHPLþQLKLQãWDODFLMDKQDUHNUHDFLMVNLK
YR]LOLKLQQDVRURGQLKSRGURþMLKYNOMXþQRQDUHNUHDFLMVNLKSORYLOLK'RGDWQH
SUHVNXVQHPHWRGHLQ]DKWHYDQHODVWQRVWL'RSROQLOR$$
Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2:
Electrical apparatus for continuous operation in a fixed installation in recreational
vehicles and similar premises including recreational craft - Additional test methods and
performance requirements
Elektrische Geräte für die Detektion von Kohlenmonoxid in Wohnhäusern - Teil 2:
Ortsfeste elektrische Geräte zum kontinuierlichen Betrieb in Freizeitfahrzeugen und
ähnlichen Umgebungen einschließlich Sportbooten - Ergänzende Prüfverfahren und
Anforderungen an das Betriebsverhalten
Appareils électriques pour la détection de monoxyde de carbone dans les locaux à
usage domestique - Partie 2: Appareils électriques en fonctionnement continu et en
installation fixe dans les véhicules de loisir et locaux similaires incluant les embarcations
de loisir - Méthodes d'essai supplémentaires et exigences d'aptitude à la fonction
Ta slovenski standard je istoveten z: EN 50291-2:2010/prAA:2015
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
EN 50291-2:2010
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
November 2015
ICS 13.320
English Version
Electrical apparatus for the detection of carbon monoxide in
domestic premises - Part 2: Electrical apparatus for continuous
operation in a fixed installation in recreational vehicles and
similar premises including recreational craft - Additional test
methods and performance requirements
Appareils électriques pour la détection de monoxyde de Elektrische Geräte für die Detektion von Kohlenmonoxid in
carbone dans les locaux à usage domestique - Partie 2: Wohnhäusern - Teil 2: Ortsfeste elektrische Geräte zum
Appareils électriques en fonctionnement continu et en kontinuierlichen Betrieb in Freizeitfahrzeugen und ähnlichen
installation fixe dans les véhicules de loisir et locaux Umgebungen einschließlich Sportbooten - Ergänzende
similaires incluant les embarcations de loisir - Méthodes Prüfverfahren und Anforderungen an das Betriebsverhalten
d'essai supplémentaires et exigences d'aptitude à la
fonction
This draft amendment prAA, if approved, will modify the European Standard EN 50291-2:2010; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2016-02-19.
It has been drawn up by CLC/TC 216.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 58514 Ref. No. EN 50291-2:2010/prAA:2015 E
Contents
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Design requirements . 6
4.1 General requirements. 6
4.2 Construction . 6
4.3 Visual Indicators . 6
4.4 Alarms . 6
4.5 End-of-life . 6
4.6 Fault Warnings . 6
4.7 Alarm silence facility . 6
4.8 Fault Warning silence facility . 7
4.9 Transmittable output signal (applicable for type A apparatus only) . 7
4.10 Software-controlled apparatus . 7
4.11 Labelling . 7
4.12 Requirements for the use of batteries . 8
4.13 Inter-connectable apparatus . 8
4.14 Back-up power source. 8
5 Test and performance requirements . 8
5.1 General requirements for tests . 8
5.2 Normal conditions for tests . 8
5.3 Test methods and performance requirements . 8
6 Apparatus using radio links . 13
7 User instructions . 13
7.1 . 13
7.2 . 13
7.3 . 13
7.4 . 14
8 Packaging . 14
Annexes . 14
Bibliography . 15
Figure
Figure 1 – Examples for marking .7
Tables
Table 1 – Electromagnetic emission – Test conditions and performance requirements . 11
Table 2 – Electromagnetic immunity – Test conditions and performance requirements . 12
Table 3 – Immunity for DC powered apparatus . 13
European foreword
This document (EN 50291-2:2010/prAA:2015) has been prepared by CLC/TC 216, "Gas detectors".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of (doa) dor + 6 months
this document has to be announced
at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to (to be confirmed or
be withdrawn modified when voting)
1 Scope
This European Standard specifies general requirements for the construction, testing and performance
of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation
in a fixed installation in recreational vehicles and similar premises including recreational craft.
NOTE For caravan holiday homes EN 50291-1 applies.
This European Standard specifies apparatus designed to operate in the event of an escape of carbon
monoxide and to provide a visual and audible alarms only (Type B of EN 50291-1), or to provide visual
and audible alarms and an executive action in the form of an output signal that can actuate directly or
indirectly a shut-off device and/or other ancillary device (Type A of EN 50291-1).
This European Standard excludes apparatus
− for the detection of combustible gases, other than carbon monoxide itself (see EN 50194-1),
− for the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or
commercial premises,
− for CO measurement for smoke and fire detection.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 50270:2006, Electromagnetic compatibility – Electrical apparatus for the detection and
measurement of combustible gases, toxic gases or oxygen
EN 50291-1, Electrical apparatus for the detection of carbon monoxide in domestic premises – Part 1:
Test methods and performance requirements
EN 60068-2-6, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal) (IEC 60068-2-
6)
EN 60068-2-7, Environmental testing – Part 2-7: Tests – Test Ga: Acceleration, steady state
(IEC 60068-2-7)
EN 60068-2-27, Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock (IEC 60068-
2-27)
EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989)
EN 60721-3-6:1993, Classification of environmental conditions – Part 3-6: Classification of groups of
environmental parameters and their severities – Ship environment (IEC 60721-3-6:1987 + A1:1991)
EN 60945:2002, Maritime navigation and radiocommunication equipment and systems – General
requirements – Methods of testing and required test results (IEC 60945:2002)
ISO 7637-2:2011, Road vehicles – Electrical disturbances from conduction and coupling –
Part 2: Electrical transient conduction along supply lines only
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 50291-1 and the following
apply.
3.1
recreational vehicle
recreational vehicles considered by this European Standard include recreational craft, caravans and
motor caravans
Note 1 to entry: Other motorised vehicles like trucks are known to have residential accommodation. They are
not recreational vehicles but are considered as similar premises in respect of this European Standard.
3.2
recreational craft
boat of a minimum length of 2,5 m and a maximum length of 24 m as specified in Directive 94/25/EC,
which is intended for sports or leisure purposes
Note 1 to entry: For the purposes of this European Standard the word ´boat´ should be taken with the meaning
´recreational craft´.
3.3
remote sensor
sensor assembly that is mounted in a separate location from the control unit
Note 1 to entry: This definition should be read in conjunction with EN 50291-1, Definition 3.5.
3.4
control unit
unit that may contain the power supply, signal processing, alarm circuits and indicators
3.5
vehicle supply powered apparatus
apparatus designed to be powered by the vehicle’s electrical supply
3.6
caravan
trailer leisure accommodation vehicle that meets requirements for construction and use of road
vehicles
[SOURCE: EN 13878:2003]
3.7
motor caravan
self-propelled leisure ac
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.