EN 50291-1:2018/AC:2021-01
(Corrigendum)Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
- BACK
- 14-Jan-2021
- 13.320
- CLC/TC 216
Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
TC - in order to correct in-text citations
Gaswarngeräte - Elektrische Geräte für die Detektion von Kohlenmonoxid in Wohnhäusern - Teil 1: Prüfverfahren und Anforderungen an das Betriebsverhalten
Détecteurs de gaz - Appareils électriques pour la détection de monoxyde de carbone dans les locaux à usage domestique - Partie 1 : Méthodes d'essai et exigences de performances
Javljalniki plina - Električne naprave za odkrivanje ogljikovega monoksida v gospodinjstvih - 1. del: Preskusne metode in zahtevane lastnosti - Popravek AC
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2021
Javljalniki plina - Električne naprave za odkrivanje ogljikovega monoksida v
gospodinjstvih - 1. del: Preskusne metode in zahtevane lastnosti - Popravek AC
Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic
premises - Part 1: Test methods and performance requirements
Gaswarngeräte - Elektrische Geräte für die Detektion von Kohlenmonoxid in
Wohnhäusern - Teil 1: Prüfverfahren und Anforderungen an das Betriebsverhalten
Détecteurs de gaz - Appareils électriques pour la détection de monoxyde de carbone
dans les locaux à usage domestique - Partie 1 : Méthodes d'essai et exigences de
performances
Ta slovenski standard je istoveten z: EN 50291-1:2018/AC:2021-01
ICS:
13.120 Varnost na domu Domestic safety
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali d
...
This May Also Interest You
This document specifies general requirements for the construction, testing and performance of electrically operated apparatus for the detection of flammable gases, designed for continuous operation in a fixed installation in household premises. The apparatus can be mains or battery powered. Additional requirements for apparatus to be used in recreational vehicles and similar premises are specified in EN 50194-2. NOTE For caravan holiday homes EN 50194-1 applies. This document specifies four types of apparatus to warn and/or alarm in the event of an escape of town gas, natural gas or liquefied petroleum gas (LPG), Hydrogen and flammable refrigerant gases: — Type A apparatus – provides a visual and audible alarm and an executive action in the form of an output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device in the event of an escape of town gas, natural gas (LNG) liquefied petroleum gas (LPG) and Hydrogen gases; — Type B apparatus – same as Type A but provides a visual and audible alarm only; — Type C apparatus – provides a visual and audible alarm and an executive action in the form of an output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device in the event of an escape of flammable refrigerant gas A2L, A2 or A3 as classified in other International Standards, e.g. ISO 817; — Type D apparatus – intended to be installed where there can be a source of danger to the public, designed for continuous operation in fixed installations in non-classified explosive atmosphere premises (where the requirements for electrical Ex-safety are not requested). Intended for any flammable gases. Typically Type D apparatus are available with analogue or digital output, designed as detection system. These systems are regularly maintained by competent persons and/or have a protection of IP44 or higher. For type D apparatus, EN 60079-29-1 is applied. See Annex C for further clarification on the apparatus types and their application. NOTE Apparatus complying with this document is not considered suitable for installation in potentially explosive atmospheres, in which case the EN 60079 series applies. NOTE Apparatus complying with EN 60079-29-1 will not necessarily comply with this document. This document does not apply to any of the following: — apparatus intended for the detection of dusts or mists in air; — scientific or laboratory-based apparatus used only for analysis or measurement; — apparatus used exclusively for process measurement purposes; — apparatus for medical purposes; — apparatus used for breath alcohol measurement; — apparatus intended for the direct measurement of automotive exhaust gases; — apparatus intended for use in industrial environments.
- Standard37 pagesEnglish languagesale 10% offe-Library read for×1 day
- 12-Oct-2023
- 13.320
- CLC/TC 216
This document serves as a guide on the selection, installation, use and maintenance of apparatus for the detection of carbon monoxide, intended for continuous operation in a fixed installation in domestic premises, caravans and boats. This guide is intended to cover any type of domestic or residential accommodation, including leisure accommodation vehicles such as touring and static caravans, and motor homes; and recreational craft such as canal barges. Some static caravans are used as permanent dwellings; in such cases EN 50291 1 is appropriate. For all other types of caravan, EN 50291 2 is appropriate. This guide is read in conjunction with EN 50291 1 and EN 50291 2 together with any additional relevant national or local regulations. This document refers to the installation of two types of apparatus: a) Type A apparatus, to provide a visual and audible alarm and an executive action in the form of an output signal that can be used to actuate directly or indirectly a ventilation or other ancillary device; b) Type B apparatus, to provide a visual and audible alarm only. This document excludes apparatus for the detection of combustible gases (see EN 50244) and for industrial installations or commercial premises.
- Standard25 pagesEnglish languagesale 10% offe-Library read for×1 day
- 13-Apr-2023
- 13.320
- CLC/TC 216
This document specifies general requirements for the construction, testing and performance of electrically operated refrigerant fixed gas detection equipment in safety applications. This document will not specify requirements for portable locating leak detectors for refrigerant application as already covered by EN 14624:2012. This document is applicable to equipment whose primary purpose is to provide an indication, alarm and/or other output function to warn of the presence of refrigerant gases in an industrial or commercial environment and, in some cases, to initiate automatic or manual protective actions. It is applicable to equipment in which the sensor automatically generates an electrical signal when gas is present. This standard does not apply to gas detection equipment: — for non-refrigerant application; — used for air pollution monitoring; — sampling systems, which are not integral part of the gas detection equipment; — open path gas detection; — residential applications; — process control; — for applications in mines; — portable locating leak detectors for refrigerant application.
- Standard20 pagesEnglish languagesale 10% offe-Library read for×1 day
- 19-Dec-2019
- 03-Nov-2022
- 13.320
- 27.200
- 517/2014
- CLC/TC 216
This document specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. NOTE For caravan holiday homes EN 50291-1 applies. This European Standard specifies apparatus designed to operate in the event of an escape of carbon monoxide and to provide a visual and audible alarms only (Type B of EN 50291-1), or to provide visual and audible alarms and an executive action in the form of an output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device (Type A of EN 50291-1). This European Standard excludes apparatus - for the detection of combustible gases, other than carbon monoxide itself (see EN 50194 1), - for the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or commercial premises, - for CO measurement for smoke and fire detection.
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 29-Aug-2019
- 25-Apr-2022
- 13.320
- CLC/TC 216
This document specifies test methods and performance requirements for electrical apparatus for the detection of
combustible gases designed for continuous operation in a fixed installation in recreational vehicles and similar
premises.
NOTE 1 For caravan holiday homes EN 50194-1 applies.
This document specifies apparatus designed to operate in the event of an escape of liquefied petroleum gas (LPG)
and/or petrol (gasoline) vapour and to provide a visual and audible alarm and an executive action in the form of an
output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device (Type A of
EN 50194-1).
The document excludes apparatus for the detection of toxic gases such as carbon monoxide (see EN 50291).
Apparatus complying with this document is not considered suitable for industrial or commercial installations for
which EN 60079-29-1 apply.
NOTE 2 Apparatus tested in accordance with EN 60079-29-1 will not necessarily comply with this standard.
- Standard18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 23-May-2019
- 17-Mar-2022
- 13.320
- CLC/TC 216
This European Standard specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in domestic premises. The objective is to detect defective fossil fuel or solid fuel appliances so that they can be repaired or replaced. The function of the standard is not to monitor low levels of CO for health purposes. (Annex F gives recommendations for units displaying low (warning) CO concentrations). The apparatus may be mains-powered or battery-powered. Such apparatus is intended to warn of an acute level of CO, enabling the occupant to react before being exposed to significant risk. Additional requirements for apparatus to be used in recreational vehicles and similar premises are specified in EN 50291-2. NOTE 1 For caravan holiday homes EN 50291-1 applies. This European Standard specifies two types of apparatus, these are: - type A - to provide a visual and audible alarm and an executive action in the form of a transmittable output signal that can be used to actuate directly or indirectly a ventilation or other ancillary device; - type B - to provide a visual and audible alarm only. NOTE 2 Both type A and type B apparatus can be interconnected. This European Standard excludes apparatus for: - the detection of combustible gases, other than carbon monoxide itself (see EN 50194-1); - the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or commercial premises; - CO measurement for smoke and fire detection; - CO measurement in carparks and tunnels. NOTE 3 See EN 50545-1.
- Standard40 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard – translation42 pagesSlovenian languagesale 10% offe-Library read for×1 day
- 26-Apr-2018
- 25-Feb-2021
- 13.320
- 305/2011
- M/109
- CLC/TC 216
This draft European Standard provides information on the selection, installation, use and maintenance of apparatus for the detection of combustible gas designed for continuous operation in a fixed installation in domestic premises as described in the EN 50194 series. This guide should be read in conjunction with any additional relevant national or local regulations. The draft European Standard refers to the installation of two types of apparatus designed to operate in the event of an escape of town gas, natural gas or liquefied petroleum gas: - Type A apparatus - to provide a visual and audible alarm and an executive action in the form of an output signal that may actuate directly or indirectly a shut-off device and/or other ancillary device; - Type B apparatus - to provide visual and audible alarms only. This guide is not applicable to the use of apparatus: - for the detection of toxic gases such as carbon monoxide, see EN 50292; - for industrial or commercial premises, see EN 60079-29-2.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 05-May-2016
- 13.320
- CLC/TC 216
This guide provides information on the selection, installation, use and maintenance of apparatus for the detection of carbon monoxide, intended for continuous operation in a fixed installation in domestic premises, caravans and boats. It is the intent of this guide to cover any type of domestic or residential accommodation, including leisure accommodation vehicles such as touring and static caravans, and motor homes; and recreational craft such as canal barges. It should be read in conjunction with EN 50291-1 and EN 50291-2 together with any additional relevant national or local regulations. The guide refers to the installation of two types of apparatus: Type A apparatus - to provide a visual and audible alarm and an executive action in the form of an output signal that can be used to actuate directly or indirectly a ventilation or other ancillary device. Type B apparatus - to provide a visual and audible alarm only. This guide excludes apparatus: • for the detection of combustible gases (see EN 50244); • for industrial installations or commercial premises.
- Standard20 pagesEnglish languagesale 10% offe-Library read for×1 day
- 22-Aug-2013
- 13.320
- CLC/TC 216
This European Standard covers apparatus designed for checking the performance of heating appliances by measuring flue gas parameters of gas fired heating appliances for domestic residential and commercial applications. The apparatus may consist of different functional modules which may be tested separately for complying with this standard, and will be combined in different ways according to the different applications. Part 1 of EN 50379 specifies the general requirements and is supplemented by the requirements in EN 50379 2 and/or EN 50379 3. This European Standard specifies the performance requirements of portable spot reading apparatus designed to detect specific combustion flue gas parameters, such as concentration of gaseous compounds, temperature and/or pressure, to be used to decide if maintenance for the appliance is required and for adjusting the appliance during maintenance. This European Standard excludes apparatus for – checking appliances using fuels other than gas, – continuous emission, safety monitoring and control, and – use in vessels with an international load line. NOTE 1 When this apparatus is used in industrial premises, national regulations should be observed. NOTE 2 Apparatus may contain functional modules which are not covered by this standard e.g. measurement of smoke spot number (see EN 267:2009+A1:2011, Annex A) and/or measurement of indoor ambient air (see EN 50543).
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 05-Apr-2012
- 18-Mar-2015
- 13.320
- CLC/TC 216
This European Standard covers apparatus designed to measure flue gas parameters of heating appliances for domestic residential and commercial applications using commercially available fuels in compliance with metrological specification. The apparatus may consist of different functional modules that may be tested separately for complying with this standard and will be combined in different ways according to the different applications. Part 1 of EN 50379 specifies the general requirements and is supplemented by the requirements in EN 50379 2 and/or EN 50379 3. This European Standard specifies the performance requirements of portable spot reading apparatus designed to give a measurement of specific combustion flue gas parameters such as concentration of gaseous compounds, temperature and/or pressure to be used for testing the compliance with national regulations for the above mentioned appliances. This European Standard excludes apparatus for – continuous emission, safety monitoring and control, and – use in vessels with an international load line. NOTE 1 When this apparatus is used in industrial premises, national regulations should be observed. NOTE 2 Apparatus may contain functional modules that are not covered by this standard e.g. measurement of smoke spot number (see EN 267:2009+A1:2011, Annex A) and/or measurement of indoor ambient air (see EN 50543).
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 05-Apr-2012
- 18-Mar-2015
- 13.320
- CLC/TC 216
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.