EN ISO 105-E06:1997

SLOVENSKI STANDARD
01-marec-1999
Tekstilije - Preskušanje barvne obstojnosti - Del E06: Barvna obstojnost proti
kapljam: alkalije (ISO 10- E06:1989)
Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO
105-E06:1989)
Textilien - Farbechtheitsprüfungen - Teil E06: Farbechtheit gegen Flecken: Alkali (ISO
105-E06:1989)
Textiles - Essais de solidité des teintures - Partie E06: Solidité des teintures aux alcalis
(ISO 105-E06:1989)
Ta slovenski standard je istoveten z: EN ISO 105-E06:1997
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ISO IO!%E06:1989(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for approval before their acceptance
as International Standards by the ISO Council. They are approved in
accordance with ISO procedures requiring at least 75 % approval by the
member bodies voting.
International Standard ISO 105-EO6 was prepared by Technical Commit-
tee ISO/TC 38, Textiles.
This third edition cancels and replaces the second edition
(ISO 105.E06:1987), of which it constitutes a technical revision.
ISO 105 was previously published in 13 “parts ”, each designated by a
letter (e.g. “Part A ”), with publication dates between 1978 and 1985.
Esch part contained a series of “sections ”, each designated by the re-
spective patt letter and by a two-digit serial number (e.g.
“Section AOI ”). These sections are now being republished as separate
documents, themselves designated “Parts” but retaining their earlier
alphanumeric designations. A complete list of these Parts is given in
ISO 105-AOI.
0 ISO 1989
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Prlnted in Switzerland
ii
SIST EN ISO
...