EN ISO 18563-1:2022
(Main)Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
This document specifies the functional characteristics of multi-channel ultrasonic phased array instruments used for array probes and provides methods for their measurement and verification.
This document is also applicable to ultrasonic phased array instruments in automated systems; but other tests can be needed to ensure satisfactory performance. When the phased array instrument is a part of an automated system, the acceptance criteria can be modified by agreement between the parties involved.
This document also can partly be applicable to FMC instruments and TFM instruments.
This document gives the extent of the verification and defines acceptance criteria within a frequency range of 0,5 MHz to 10 MHz.
Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung mit phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO 18563-1:2022)
Dieses Dokument legt die funktionellen Eigenschaften von mehrkanaligen Phased Array Ultraschallprüfgeräten für den Betrieb von Array-Prüfköpfen fest, und liefert Verfahren für deren Messung und Verifizierung.
Dieses Dokument ist auch für Phased-Array-Ultraschallprüfgeräte in automatisierten Anlagen anwendbar, jedoch können dann zusätzliche Prüfungen erforderlich sein, um eine zufriedenstellende Leistung sicherzustellen. Wenn das Phased-Array-Prüfgerät Teil einer automatisierten Anlage ist, können die Annahmekriterien nach Vereinbarung zwischen den beteiligten Parteien modifiziert werden.
Dieses Dokument kann teilweise auch für FMC-Prüfgeräte und TFM-Prüfgeräte angewendet werden.
Dieses Dokument gibt den Umfang der Verifizierung an und legt die Annahmekriterien für den Frequenzbereich von 0,5 MHz bis 10 MHz fest.
Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons en multiéléments - Partie 1: Appareils (ISO 18563-1:2022)
Le présent document spécifie les caractéristiques fonctionnelles des appareils de contrôle par ultrasons multiéléments destinés à alimenter des traducteurs multiéléments et fournit des méthodes pour les mesurer et les vérifier.
Le présent document est également applicable aux appareils de contrôle par ultrasons multiéléments présents dans les systèmes automatiques, mais, dans ce cas, d’autres essais peuvent être nécessaires pour garantir des performances satisfaisantes. Lorsque l’appareil multiélément est intégré dans un système automatique, les critères d’acceptation peuvent être modifiés dans le cadre d’un accord entre les parties concernées.
Le présent document peut également s’appliquer en partie aux appareils FMC et aux appareils FTP.
Le présent document donne l’étendue de la vérification et définit des critères d’acceptation dans une gamme de fréquences de 0,5 MHz à 10 MHz.
Neporušitvene preiskave - Ugotavljanje značilnosti in preverjanje ultrazvočne opreme faznih sistemov - 1. del: Naprave (ISO 18563-1:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2022
Nadomešča:
SIST EN ISO 18563-1:2015
Neporušitvene preiskave - Ugotavljanje značilnosti in preverjanje ultrazvočne
opreme faznih sistemov - 1. del: Naprave (ISO 18563-1:2022)
Non-destructive testing - Characterization and verification of ultrasonic phased array
equipment - Part 1: Instruments (ISO 18563-1:2022)
Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-
Prüfausrüstung mit phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO 18563-1:2022)
Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par
ultrasons en multiéléments - Partie 1: Appareils (ISO 18563-1:2022)
Ta slovenski standard je istoveten z: EN ISO 18563-1:2022
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 18563-1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 19.100 Supersedes EN ISO 18563-1:2015
English Version
Non-destructive testing - Characterization and verification
of ultrasonic phased array equipment - Part 1: Instruments
(ISO 18563-1:2022)
Essais non destructifs - Caractérisation et vérification Zerstörungsfreie Prüfung - Charakterisierung und
de l'appareillage de contrôle par ultrasons en Verifizierung der Ultraschall-Prüfausrüstung mit
multiéléments - Partie 1: Appareils (ISO 18563- phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO
1:2022) 18563-1:2022)
This European Standard was approved by CEN on 8 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18563-1:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 18563-1:2022) has been prepared by Technical Committee ISO/TC 135 "Non-
destructive testing" in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by March 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18563-1:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 18563-1:2022 has been approved by CEN as EN ISO 18563-1:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 18563-1
Second edition
2022-08
Non-destructive testing —
Characterization and verification of
ultrasonic phased array equipment —
Part 1:
Instruments
Essais non destructifs — Caractérisation et vérification de
l'appareillage de contrôle par ultrasons en multiéléments —
Partie 1: Appareils
Reference number
ISO 18563-1:2022(E)
ISO 18563-1:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 18563-1:2022(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.2
5 General requirements of conformity . 4
6 Manufacturer’s technical specification for ultrasonic phased array instruments .4
7 Performance requirements for ultrasonic phased array instruments .8
8 Group 1 tests .10
8.1 Equipment required for group 1 tests . 10
8.2 Battery operational time . 11
8.2.1 General . 11
8.2.2 Procedure . 11
8.2.3 Acceptance criterion .12
8.3 Stability after warm-up time . 12
8.3.1 Procedure . 12
8.3.2 Acceptance criteria . 14
8.4 Stability against temperature . 14
8.4.1 Procedure . 14
8.4.2 Acceptance criteria . 14
8.5 Stability against voltage variations . 15
8.5.1 Procedure .15
8.5.2 Acceptance criteria . 15
8.6 Deviation of time base .15
8.6.1 General .15
8.6.2 Procedure . 15
8.6.3 Acceptance criterion . 17
8.7 Transmitter . 17
8.7.1 General . 17
8.7.2 Pulse repetition frequency . 17
8.7.3 Effective output impedance . 17
8.7.4 Resolution of time delay . 18
8.8 Receiver . 19
8.8.1 General . 19
8.8.2 Cross-talk attenuation between receivers . 19
8.8.3 Dead time after the transmitter pulse . 20
8.8.4 Dynamic range and maximum input voltage .22
8.8.5 Receiver input impedance . 24
8.8.6 Time-corrected gain (TCG) . 24
8.8.7 Resolution of time delay .25
8.8.8 Linearity of vertical display against frequency . 26
8.8.9 Summation . 26
8.9 Gates. 27
8.9.1 General . 27
8.9.2 Linearity of gate amplitude .28
8.9.3 Linearity of time-of-flight in the g
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.