Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification

This European Standard specifies the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of 25 bar (2,5 MPa) and vacuum within the temperature range of -30 ºC to +70 ºC and, when designated -LT, -50 ºC to +70 ºC.

Gummischläuche und -schlauchleitungen für Flüssiggas LPG (flüssig oder gasförmig) und Erdgas bis 25 bar (2,5 MPa) - Spezifikation

Diese Europäische Norm legt Anforderungen für Gummischläuche und -schlauchleitungen fest, die zur Übergabe von Flüssiggas (LPG) in der flüssigen oder gasförmigen Phase sowie Erdgas bei Betriebsdrücken bis zu maximal 25 bar (2,5 MPa) oder Vakuum innerhalb eines Temperaturbereichs von -30 °C bis +70 °C oder -50 °C bis +70 °C (Typ LT) verwendet werden.

Tuyaux et flexibles en caoutchouc pour le gaz de pétrole liquéfié GPL (en phase liquide ou gazeuse) et le gaz naturel jusqu'à 25 bar (2,5 MPa) - Spécification

La présente Norme européenne spécifie les prescriptions relatives aux tuyaux et flexibles en caoutchouc destinés au transport du gaz de pétrole liquéfié (G.P.L.) en phase liquide ou gazeuse et du gaz naturel sous une pression maximale de service de 25 bar (2,5 MPa) et sous vide dans la plage de température de - 30 °C à + 70 °C et - 50 °C à + 70 °C pour le type L.T.

Gumene cevi in cevni priključki za utekočinjeni naftni plin, LPG (tekoča ali plinska faza) in zemeljski plin do 25 barov (2,5 MPa) - Specifikacija

General Information

Status
Withdrawn
Publication Date
28-Oct-2003
Withdrawal Date
20-Jan-2026
ICS
23.040.70 - Hoses and hose assemblies
Technical Committee
CEN/TC 218 - Rubber and plastics hoses and hose assemblies
Drafting Committee
CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Mar-2017
Completion Date
21-Jan-2026
Ref Project
SIST EN 1762:2004 - Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification

Relations

Replaces
EN 1762:1997 - Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
Effective Date
22-Dec-2008
Replaced By
EN 1762:2017 - Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
Effective Date
08-Mar-2017
Refers
EN 15742:2009 - Animal feeding stuffs - Determination of OC-pesticides and PCB’s by GC/ECD
Effective Date
28-Jan-2026
Refers
EN 594:1995 - Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
Effective Date
28-Jan-2026
Refers
EN ISO 10619-1:2018 - Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
Effective Date
28-Jan-2026
Corrected By
EN 1762:2003/AC:2007 - Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
Effective Date
08-Jun-2022

Frequently Asked Questions

EN 1762:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification". This standard covers: This European Standard specifies the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of 25 bar (2,5 MPa) and vacuum within the temperature range of -30 ºC to +70 ºC and, when designated -LT, -50 ºC to +70 ºC.

This European Standard specifies the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of 25 bar (2,5 MPa) and vacuum within the temperature range of -30 ºC to +70 ºC and, when designated -LT, -50 ºC to +70 ºC.

EN 1762:2003 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 1762:2003 has the following relationships with other standards: It is inter standard links to EN 1762:1997, EN 1762:2017, EN 15742:2009, EN 594:1995, EN ISO 10619-1:2018, EN 1762:2003/AC:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 1762:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gummischläuche und -schlauchleitungen für Flüssiggas LPG (flüssig oder gasförmig) und Erdgas bis 25 bar (2,5 MPa) - SpezifikationTuyaux et flexibles en caoutchouc pour le gaz de pétrole liquéfié GPL (en phase liquide ou gazeuse) et le gaz naturel jusqu'a 25 bar (2,5 MPa) - SpécificationRubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Spec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...