Hose fittings with clamp units - Part 6: TW tank truck couplings

This document specifies the design, materials and dimensions for hose fittings with couplings for tank trucks (TW couplings).
Couplings for tank trucks in accordance to this document are intended to link hoses with connections for the transport of liquids, solid matters and gases with the exception of liquid gas and steam. They can be employed in a working pressure range of - 800 mbar up to 25 bar at working temperatures of - 20 °C up to + 65 °C. Couplings for tank trucks for other operating conditions is subject to agreement.
WARNING   Male and female dust couplings are pressure resistant plugs. They do not work as locking device, so, if pipelines remain under pressure, a locking device shall be superposed.

Schlaucharmaturen mit Klemmfassungen - Teil 6: TW Tankwagen-Kupplungen

Diese Europäische Norm legt die Konstruktion, Werkstoffe und Maße für Schlaucharmaturen mit Kupplungen für Tankwagen (TW-Kupplungen) fest.
Kupplungen für Tankwagen nach dieser Norm dienen der Verbindung von Schläuchen mit Anschlüssen zum Fördern von Flüssigkeiten, Feststoffen und Gasen, ausgenommen Flüssiggas und Dampf. Die Kupplungen können in einem Arbeitsdruckbereich von  !0,8 bar" bis !16 bar" bei Arbeitstemperaturen von
20 °C bis + 65 °C verwendet werden. Tankwagen-Kupplungen für andere Betriebsbedingungen nach Vereinbarung.
WARNUNGVater- und Mutterteil-Blindkupplungen sind druckbeständige Verschlüsse. Sie übernehmen jedoch nicht die Funktion eines Absperrorgans, das in jedem Fall vorgeschaltet sein muss, solange Leitungen unter Druck stehen.

Raccords pour flexibles avec demi-coquille - Partie 6: Raccords TW pour camion-citerne

Cevni fitingi z objemkami - 6. del: Spojke za TW cisterne

General Information

Status
Withdrawn
Publication Date
23-Jan-2007
Withdrawal Date
09-Jul-2013
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
10-Jul-2013
Completion Date
10-Jul-2013

Relations

Buy Standard

Standard
EN 14420-6:2005+A1:2007
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni fitingi z objemkami - 6. del: Spojke za TW cisterneSchlaucharmaturen mit Klemmfassungen - Teil 6: TW Tankwagen-KupplungenRaccords pour flexibles avec demi-coquille - Partie 6: Raccords TW pour camion-citerneHose fittings with clamp units - Part 6: TW tank truck couplings23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-6:2004+A1:2007SIST EN 14420-6:2005+A1:2007en,fr,de01-september-2007SIST EN 14420-6:2005+A1:2007SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14420-6:2004+A1
January 2007 ICS 23.040.70 Supersedes EN 14420-6:2004English Version
Hose fittings with clamp units - Part 6: TW tank truck couplings Raccords pour flexibles avec demi-coquille - Partie 6: Raccords TW pour camion-citerne
Schlaucharmaturen mit Klemmfassungen - Teil 6: TW Tankwagen-Kupplungen This European Standard was approved by CEN on 30 September 2004 and includes Amendment 1 approved by CEN on 13 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14420-6:2004+A1:2007: ESIST EN 14420-6:2005+A1:2007

Gauges for TW tank truck couplings.31 A.1 General.31 A.2 Design; designation, dimensions and materials.31 A.2.1 General.31 A.2.2 Gauge for sealing ring.32 A.2.3 Gauge for tension rings.36 A.2.4 Gauge for curved pieces and plugs.38 A.2.5 Calliper for caps.41 A.3 Marking.43 Bibliography.44
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14420-6:2005+A1:2007

female coupling (type MKS) Figure 2 — Hose fitting with TW coupling for
male coupling (type VKS) Table 1 — Survey Item No Designation Remark 1
Clamping ring with levers
according to 4.3.4.2 and 4.3.4.3 2
Sealing ring
according to 4.3.4.4 3
Hose tail type MKST
according to 4.1.2 4
Clamp unit
according to EN 14420-3 5
Hose tail type VKST
according to 4.1.3 6
Protecting ring
according to 4.1.4
Designation of a complete hose fitting shall be according to EN 14420-1. SIST EN 14420-6:2005+A1:2007

Key a Coupling side part of the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.