EN ISO 15147:2012
(Main)Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012)
Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012)
ISO 15147:2012 specifies methods for the measurement of widths and lengths of cut light conveyor belts as described in ISO 21183-1 and specifies the tolerances on the dimensions.
Leichte Fördergurte - Toleranzen für Breite und Länge von geschnittenen leichten Fördergurten (ISO 15147:2012)
Diese Internationale Norm legt Verfahren für die Messung der Breite und Länge geschnittener leichter
Fördergurte nach ISO 21183-1 und die Toleranzen der Abmessungen fest.
ANMERKUNG Die Breiten und Längen leichter Fördergurte sind nicht genormt.
Courroies transporteuses légères - Tolérances sur largeurs et longueurs des courroies transporteuses légères à bords tranchés (ISO 15147:2012)
L'ISO 15147:2012 spécifie des méthodes pour le mesurage de la largeur et de la longueur des courroies transporteuses légères à bords tranchés décrites dans l'ISO 21183-1 et spécifie les tolérances sur les dimensions.
Naprave za kontinuirni transport - Lahki trakovi tračnih transporterjev - Tolerance dolžine in širine izrezanih lahkih trakov (ISO 15147:2012)
Ta mednarodni standard določa metode za merjenje dolžine in širine izrezanih lahkih trakov, kot je opisano v standardu ISO 21183-1, in določa tolerance dimenzij.
General Information
- Status
- Published
- Publication Date
- 30-Nov-2012
- Withdrawal Date
- 29-Jun-2013
- Technical Committee
- CEN/TC 188 - Conveyor belts
- Drafting Committee
- CEN/TC 188/WG 5 - Light conveyor belts
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 01-Dec-2012
- Completion Date
- 01-Dec-2012
Relations
- Effective Date
- 12-Dec-2012
Overview
EN ISO 15147:2012 is an international standard developed by ISO and adopted by CEN that specifies the methods for measuring widths and lengths of cut light conveyor belts, as defined in ISO 21183-1. The standard also sets forth tolerances applicable to these dimensions to ensure quality and compatibility in conveyor belt manufacturing and application. This standard replaces the earlier 1999 edition and applies to light conveyor belts used across various industrial sectors.
Key Topics
Measurement Methods
The standard describes precise procedures for determining the widths and lengths of cut light conveyor belts. It covers:- Width measurement at three equidistant points along the belt's length using appropriate linear measurement tools.
- Length measurement for:
- Endless belts and open-ended belts prepared for splicing-calculated by summing individual flat-length segments and adjusted for belt thickness.
- Open-ended belts not prepared for splicing (slab belting)-measured via mechanical or electromechanical linear measurement methods ensuring no tension is applied.
Tolerances on Dimensions
EN ISO 15147:2012 defines specific tolerance limits to account for manufacturing variability:- Width tolerances vary depending on the belt width range and the material’s moisture absorption properties (e.g., polyester vs. cotton or polyamide).
- Length tolerances differ based on belt type, with tolerances provided for endless belts, open-ended belts prepared for splicing, and slab belting.
- Typical width tolerances range from ±1 mm for narrow belts (below 200 mm) up to ±8 mm or 0.3% of width for very wide belts (above 4,000 mm).
- Length tolerances include fixed millimeter values for shorter belts and percentage tolerances for longer belts.
Applicability and Standards Integration
The standard is consistent with ISO 21183-1, which defines principal characteristics and applications of light conveyor belts. It ensures harmonization across national standards within CEN member countries.
Applications
EN ISO 15147:2012 is essential for manufacturers, suppliers, and users of light conveyor belts in industries including:
Material Handling and Packaging
Ensuring conveyor belts fit precisely in machinery reduces downtime and improves efficiency. Accurate dimensional control helps maintain consistent belt performance.Food and Pharmaceutical Processing
Compliance with dimensional tolerances ensures hygienic and safe conveyor belt operation with minimal risk of mechanical failure during product transport.Automotive and Electronics Assembly Lines
Precision belt sizing supports high-speed production lines where exact conveyor performance is critical for quality and timing.Logistics and Warehousing Systems
Standardized belt dimensions allow easy integration into modular conveyor systems and facilitate maintenance and belt replacement.
Related Standards
ISO 21183-1: Light Conveyor Belts - Principal Characteristics and Applications
Sets out the primary properties and appropriate industrial uses of light conveyor belts, providing foundational context for EN ISO 15147:2012.ISO/TC 41 Technical Committee on Pulleys and Belts
Oversees development of standards related to belt and pulley systems, ensuring EN ISO 15147 aligns with broader conveyor technology standards.EN ISO 15147:1999
The previous version of this standard, revised by the 2012 edition to update measurement methods and tolerances with improved clarity and consistency.
EN ISO 15147:2012 offers a reliable, industry-recognized framework for measuring and specifying dimensional tolerances on light conveyor belts, supporting quality assurance, efficient conveyor design, and interoperability across European and international markets. Compliance helps manufacturers minimize errors, optimize material usage, and ensure customer satisfaction through consistent product quality.
Frequently Asked Questions
EN ISO 15147:2012 is a standard published by the European Committee for Standardization (CEN). Its full title is "Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012)". This standard covers: ISO 15147:2012 specifies methods for the measurement of widths and lengths of cut light conveyor belts as described in ISO 21183-1 and specifies the tolerances on the dimensions.
ISO 15147:2012 specifies methods for the measurement of widths and lengths of cut light conveyor belts as described in ISO 21183-1 and specifies the tolerances on the dimensions.
EN ISO 15147:2012 is classified under the following ICS (International Classification for Standards) categories: 53.040.20 - Components for conveyors. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15147:2012 has the following relationships with other standards: It is inter standard links to EN ISO 15147:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN ISO 15147:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2013
1DGRPHãþD
SIST EN ISO 15147:1999
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW/DKNLWUDNRYLWUDþQLKWUDQVSRUWHUMHY7ROHUDQFH
GROåLQHLQãLULQHL]UH]DQLKODKNLKWUDNRY ,62
Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO
15147:2012)
Leichte Fördergurte - Toleranzen für Breite und Länge von geschnittenen leichten
Fördergurten (ISO 15147:2012)
Courroies transporteuses légères - Tolérances sur largeurs et longueurs des courroies
transporteuses légères à bords tranchés (ISO 15147:2012)
Ta slovenski standard je istoveten z: EN ISO 15147:2012
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 15147
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 53.040.20 Supersedes EN ISO 15147:1999
English Version
Light conveyor belts - Tolerances on widths and lengths of cut
light conveyor belts (ISO 15147:2012)
Courroies transporteuses légères - Tolérances sur largeurs Leichte Fördergurte - Toleranzen für Breite und Länge von
et longueurs des courroies transporteuses légères à bords geschnittenen leichten Fördergurten (ISO 15147:2012)
tranchés (ISO 15147:2012)
This European Standard was approved by CEN on 30 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15147:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 15147:2012) has been prepared by Technical Committee ISO/TC 41 "Pulleys and
belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15147:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15147:2012 has been approved by CEN as a EN ISO 15147:2012 without any modification.
INTERNATIONAL ISO
STANDARD 15147
Second edition
2012-12-01
Light conveyor belts — Tolerances
on widths and lengths of cut light
conveyor belts
Courroies transporteuses légères — Tolérances sur largeurs et
longueurs des courroies transporteuses légères à bords tranchés
Reference number
ISO 15147:2012(E)
©
ISO 2012
ISO 15147:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 15147:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Widths . 1
4 Lengths . 1
4.1 Endless belts and open-ended belts with ends prepared for splicing . 1
4.2 Open-ended belts with ends not prepared for splicing (slab belting) . 2
5 Methods of measurement and verification of dimensions . 2
5.1 Determination of the cut width . 2
5.2 Determination of the length of an endless light conveyor belt . 2
5.3 Determination of the length of an open-ended light conveyor belt and of slab belting .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...