EN 1715-2:2008

SLOVENSKI STANDARD
01-julij-2008
Nadomešča:
SIST EN 1715-2:1998
SIST EN 1715-2:1998/AC:2004
Aluminij in aluminijeve zlitine – Valjana žica – 2. del: Posebne zahteve za uporabo
v elektrotehniki
Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for
electrical applications
Aluminium und Aluminiumlegierungen - Vordraht - Teil 2: Besondere Anforderungen für
elektrotechnische Anwendungen
Aluminium et alliages d'aluminium - Fil machine - Partie 2: Exigences spécifiques pour
les applications électriques
Ta slovenski standard je istoveten z: EN 1715-2:2008
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 1715-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 77.150.10 Supersedes EN 1715-2:1997
English Version
Aluminium and aluminium alloys - Drawing stock - Part 2:
Specific requirements for electrical applications
Aluminium et alliages d'aluminium - Fil machine - Partie 2: Aluminium und Aluminiumlegierungen - Vordraht - Teil 2:
Exigences spécifiques relatives aux applications électriques Besondere Anforderungen für elektrotechnische
Anwendungen
This European Standard was approved by CEN on 14 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1715-2:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Requirements.4
3.1 Chemical composition .4
3.2 Temper for delivery.5
4 Product inspection and testing methods.6
4.1 Chemical composition .6
4.2 Mechanical properties.6
4.3 Specific electrical resistivity (or conductivity) .6
5 Delivery documents and inspection documents.6
6 Marking and packaging.7
Annex A (normative) Chemical composition of aluminium alloys EN AW-1110, EN AW-8030 and
EN AW-8176.8

Foreword
This document (EN 1715-2:2008) has been prepared by Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at
the latest by October 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document will supersede EN 1715-2:1997.
Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 4 "Wires and
drawing stock" to revise EN 1715-2:1997.
Besides editorial adjustments in the text and update of normative references, the following changes have
been made:
 Clause 3: amended; Table 1 inclusion of alloys EN AW-1110, EN AW-5005, EN AW-8030 and
EN AW-8176;
 Clause 4: amended.
EN 1715 comprises the following parts under the general title: "Aluminium and aluminium alloys – Drawing
stock":
 Part 1: General requirements and technical conditions for inspection and delivery
 Part 2: Specific requirements for electrical applications
 Part 3: Specific requirements for mechanical uses (excluding welding)
 Part 4: Specific requirements for welding applications
1)
 Part 5: Specific requirements for aluminium food packaging
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
CEN/TC 132 affirms that it is its policy that in the case when a patentee refuses to grant licenses on
standardised standard products under reasonable and not discriminatory conditions, then this product is
removed from the corresponding standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl
...